Flush or not?

drum1972 · 10-21-2010, 02:38 PM

I have a base Z and I'm looking at upgrading to 20's. Are these offsets flush or at least aggressive enough for the z? Here are the sizes/offsets:

20 X 8.5; 20 Offset
20 X 10; 25 Offset

I'm also assuming these wheels won't cause any rubbing.

Thanks in advance for help/guidance.

Stanced370Z · 10-21-2010, 02:41 PM

Definitely not aggressive enough in those widths. You're going to be tucking like a mother

wishihadnav · 10-21-2010, 02:46 PM

i would say no...they'll look sunk in..u do not want this.

drum1972 · 10-21-2010, 02:52 PM

Great, thanks for the heads up. What would both of your recommendations be for widths/offsets?

Jamaica · 10-21-2010, 02:54 PM

Quote:

Originally Posted by Slammed37S

Definitely not aggressive enough in those widths. You're going to be tucking like a mother

need something aggressive man!

drum1972 · 10-21-2010, 03:02 PM

Quote:

Originally Posted by jamaica951

need something aggressive man!

Recommendations?! That's my biggest concern is it not being flush; sticking out a bit is good too but not too much though....

kenchan · 10-21-2010, 03:04 PM

Quote:

Originally Posted by drum1972

I have a base Z and I'm looking at upgrading to 20's. Are these offsets flush or at least aggressive enough for the z? Here are the sizes/offsets:

20 X 8.5; 20 Offset
20 X 10; 25 Offset

I'm also assuming these wheels won't cause any rubbing.

Thanks in advance for help/guidance.

the 8.5's going to suck for running 245 width. but it's up to you.

anyway, if you're on stock suspension it will look pretty flush in the front but the rear will appear a little sunken in. but if you add 10mm or 15mm spacers on the back you can matchup to wat the front would look like.

but remember the gap will be that much more emphasized when you run aggressive offset. might want to consider lowering and running wider wheels with lower offsets from the start.

drum1972 · 10-21-2010, 03:08 PM

Quote:

Originally Posted by kenchan

the 8.5's going to suck for running 245 width. but it's up to you.

anyway, if you're on stock suspension it will look pretty flush in the front but the rear will appear a little sunken in. but if you add 10mm or 15mm spacers on the back you can matchup to wat the front would look like.

but remember the gap will be that much more emphasized when you run aggressive offset. might want to consider lowering and running wider wheels with lower offsets from the start.

Great, thanks for the information. I'm not too big on spacers so I'll look at an 11-inch wheel in the back and a 10 in the front.

kenchan · 10-21-2010, 03:12 PM

^^ there you go!

bullitt5897 · 10-21-2010, 03:58 PM

for the 10 up front look for mid +20's offsets

for the 11 in rear look for +0 offsets

drum1972 · 10-21-2010, 04:22 PM

Quote:

Originally Posted by bullitt5897

for the 10 up front look for mid +20's offsets

for the 11 in rear look for +0 offsets

Thanks!

10-21-2010, 02:38 PM	#1 (permalink)
drum1972 Base Member Join Date: Feb 2010 Location: Houston, TX Posts: 55 Drives: 2010 370Z M6 Rep Power: 15	Flush or not? I have a base Z and I'm looking at upgrading to 20's. Are these offsets flush or at least aggressive enough for the z? Here are the sizes/offsets: 20 X 8.5; 20 Offset 20 X 10; 25 Offset I'm also assuming these wheels won't cause any rubbing. Thanks in advance for help/guidance.

10-21-2010, 03:58 PM	#10 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	for the 10 up front look for mid +20's offsets for the 11 in rear look for +0 offsets __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Flush.	Gunzero	Wheels & Tires	22	06-26-2010 11:31 PM
Hella Flush III	Nick911sc	The Lounge (Off Topic)	13	12-02-2009 07:37 PM
hella flush G35	nogoodname	The Lounge (Off Topic)	122	09-19-2009 08:27 AM
Royal Flush Rally! August 9th - Z Meet?!?!	DannyGT	North East Region	7	08-17-2009 09:48 AM

10-21-2010, 02:41 PM	#2 (permalink)
Stanced370Z Base Member Join Date: Jul 2010 Location: Miami Lakes, Florida Posts: 198 Drives: 2010 Nissan 370Z 6MT Rep Power: 14	Definitely not aggressive enough in those widths. You're going to be tucking like a mother

10-21-2010, 02:46 PM	#3 (permalink)
wishihadnav A True Z Fanatic Join Date: Nov 2009 Location: 90090 Posts: 1,851 Drives: Force Fed Nismo Rep Power: 183	i would say no...they'll look sunk in..u do not want this.

10-21-2010, 02:52 PM	#4 (permalink)
drum1972 Base Member Join Date: Feb 2010 Location: Houston, TX Posts: 55 Drives: 2010 370Z M6 Rep Power: 15	Great, thanks for the heads up. What would both of your recommendations be for widths/offsets?

10-21-2010, 03:12 PM	#9 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	^^ there you go!