![]() |
I run about -3 front negative camber and have maybe a quarter inch of clearance without rolling the fenders... that's also with a 285 hoosier series tire on the front,
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#9 (permalink) |
|
A True Z Fanatic
Join Date: Jan 2009
Location: GSO
Posts: 2,803
Drives: VIR
Rep Power: 190 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
I run about -3 front negative camber and have maybe a quarter inch of clearance without rolling the fenders... that's also with a 285 hoosier series tire on the front, which runs more like a 295... so, what's the math? according to this calculator
http://www.1010tires.com/WheelOffsetCalculator.asp you'll be an extra 8mm out... which is about 0.3 inches... I suspect if you run a 265 or at most 275 tire with -1.0 camber, you'll be fine Last edited by travisjb; 05-10-2010 at 11:19 PM. |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Anyone have a setup of 15mm spacers in front and 20 rear? | Jourelemode | Wheels & Tires | 170 | 05-23-2014 05:42 PM |
| Rear Wheel suggestions for 1/4 mile track setup | chuckd05 | Wheels & Tires | 1 | 08-01-2012 06:40 PM |
| Ichiba V2 Wheel Spacers with Built in Studs DO fir the front | chuckd05 | Wheels & Tires | 49 | 11-24-2011 12:05 PM |
| wheel spacers | black09Z | Wheels & Tires | 9 | 05-19-2011 10:10 AM |
| Are my wheel spacers damaged? | azn370z | Wheels & Tires | 11 | 03-31-2010 10:53 PM |