|
Hello, So after talking with a wheel vendor about gettign some 18' wheels to put a set of r compounds on for track and autocross use they recommended a some
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
05-09-2010, 11:14 PM
|
#1 (permalink) |
|
Base Member
Join Date: Jul 2009
Location: Simi Valley
Posts: 38
Drives: 2009 370z white m6
Rep Power: 15  |
Using wheel spacers to even up front and rear track
Hello,
So after talking with a wheel vendor about gettign some 18' wheels to put a set of r compounds on for track and autocross use they recommended a some 18X 9.5s with +20 offset all around. I was thinking of running 275s all around. Now i know wider wheels will fit but, I just drive the car for fun so I don't feel I need the wides wheels possible. Other than being a little worried about clearance in the font i also concerned that I will end up changing the track with relationship front to rear (fronts pushed out more than the rears). Is it a bad idea to run a 10mm or 15mm spacer on the rears to even up the track or should I just buck up and get wheels with different offsets? |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Anyone have a setup of 15mm spacers in front and 20 rear? | Jourelemode | Wheels & Tires | 170 | 05-23-2014 05:42 PM |
| Rear Wheel suggestions for 1/4 mile track setup | chuckd05 | Wheels & Tires | 1 | 08-01-2012 06:40 PM |
| Ichiba V2 Wheel Spacers with Built in Studs DO fir the front | chuckd05 | Wheels & Tires | 49 | 11-24-2011 12:05 PM |
| wheel spacers | black09Z | Wheels & Tires | 9 | 05-19-2011 10:10 AM |
| Are my wheel spacers damaged? | azn370z | Wheels & Tires | 11 | 03-31-2010 10:53 PM |
Threaded Mode
