The "Will it fit?" thread

[hrtbrknprince]

Originally Posted by OptionZero

The Deep concave should clear in front. I recall a specific discussion about why the Z34 has to run Deep instead of Super Deep due to sport brakes

These are hubcentric per Get Your Wheels's sale thread:
Forgestar F14: 370Z Specifc Wheel Setup! In Stock!

EDIT:
Apparently, there IS a version of super deep concave that will clear akebonos

Forgestar New F14 Super Deep Concave





I would rock 19x10 +0

Ok so the Deep Concave clears the front but not the back? I'd HAVE to run Super Deep in rear to clear akebono? Also that link is for the F14. I'm looking for the CF5V(if they are made the same then forgive me).

If thats the case then I guess I need to find a different set of wheels since I'm not a fan of the Super Deep Concave look.

[NorthStyle]

Originally Posted by hrtbrknprince

Ok so the Deep Concave clears the front but not the back? I'd HAVE to run Super Deep in rear to clear akebono? Also that link is for the F14. I'm looking for the CF5V(if they are made the same then forgive me).

If thats the case then I guess I need to find a different set of wheels since I'm not a fan of the Super Deep Concave look.

The Deep Concave clears the front and rear no problem; me and O-Z are talking about putting an SDC up front since I've yet to see it done on a Z34.

I would assume their flow-formed wheels would have a standard fitment depending on which face regardless of model F14/CF5/CF5V/etc. Try contacting GetYourWheels as they're the local forum Forgestar gurus.

[hrtbrknprince]

Originally Posted by NorthStyle

The Deep Concave clears the front and rear no problem; me and O-Z are talking about putting an SDC up front since I've yet to see it done on a Z34.

I would assume their flow-formed wheels would have a standard fitment depending on which face regardless of model F14/CF5/CF5V/etc. Try contacting GetYourWheels as they're the local forum Forgestar gurus.

I've been pming them on here a few times but haven't heard back again yet. So I posted in here so I can go ahead and order. Thanks a lot for the help!

[grahamcracker]

Hey all! Realizing I probably posted in the wrong sub, so reposting here:

"Hey all, I've been doing lots of reading in this sub but want to make sure I'm tracking with my ideas.

With a base 2010, I'm wanting to run Work Kiwami 19x9.5 +25 fronts 19x10.5 +12 rears, then 265/35/19 front tires 305/30/19 rears. Anything jump out?"

[bunk]

Originally Posted by grahamcracker

Hey all! Realizing I probably posted in the wrong sub, so reposting here:

"Hey all, I've been doing lots of reading in this sub but want to make sure I'm tracking with my ideas.

With a base 2010, I'm wanting to run Work Kiwami 19x9.5 +25 fronts 19x10.5 +12 rears, then 265/35/19 front tires 305/30/19 rears. Anything jump out?"

I have 19x9.5 +20 255/30/19 on the font and 19x11 +15 305/30/19 on the rears, lowered on swifts with no issues. You should be fine