The "Will it fit?" thread

[justin_boy]

Originally Posted by jchammond

Closer to the knuckle too; as 19’s & 20’s can go deeper in that spot.
I don’t recall him mentioning his suspension mods or camber settings

suspension
KW V3
spl billet rear camber arms and thats it

camber -2.5 all around

I lifted my the car and reached back there and looks like im already cutting it close to the strut housing

i think ill stick with the 275 up front but go to the 335 in the rear

[jchammond]

Originally Posted by justin_boy

suspension
KW V3
spl billet rear camber arms and thats it

camber -2.5 all around

I lifted my the car and reached back there and looks like im already cutting it close to the strut housing

i think ill stick with the 275 up front but go to the 335 in the rear

2” stagger on wheels can usually run the same offset w/same camber F&R...you shouldn’t need more than a 10mm Max spacer up front & may get away with a 5mm slip on...that’s gonna be your pinch point...@the knuckle.
Hopefully everything clears without spacers...as there’s no movement up front once wheels are bolted on; unless you’re hub bearings go bad...I had about 1/2” or so at knuckle with +38 offset 10’s...but they were 19’s & only-1.0 factory camber.
Merry Christmas