The "Will it fit?" thread

[OptionZero]

dude thats what i have, been running it for 2 years. It's the standard rear GTR fitment so Mackin actually stocks it stateside (in bronze and gunmetal)



315/25/20 with room to spare
-2 camber

Alignment guy said 325 would be easy peasy

Hit up Tom @ SpeedImageUSA if thats what u want

[redondoaveb]

Originally Posted by OptionZero

dude thats what i have, been running it for 2 years. It's the standard rear GTR fitment so Mackin actually stocks it stateside (in bronze and gunmetal)



315/25/20 with room to spare
-2 camber

Alignment guy said 325 would be easy peasy

Hit up Tom @ SpeedImageUSA if thats what u want

Thanks.

[redondoaveb]

My DONK was sitting at about 1-1/4" lower than stock ride height.

[Spooler]

Originally Posted by redondoaveb

My DONK was sitting at about 1-1/4" lower than stock ride height.

I thought you said you could only go 1/2in. lower than stock or you would rub. LMAO.



Here's what you posted:

That's my problem. I can't lower it on 19's, even a smidgen, especially with 35f/30r. With 20's I gain 3/4" in ride height from tires and then I can lower it 3/4" to 1" with suspension and get it back to stock or a smidgen lower than stock ride height. If I stayed at stock ride height with 35f/30r 19's the fender to tire clearance would be huge and really look goofy. Just my opinion. One trade off for another. I can't have the best of both worlds. There are a lot more wheel and tire combos available in 19's, I would much rather be on them. 20's just work better in my situation.

[redondoaveb]

Originally Posted by Spooler

I thought you said you could only go 1/2in. lower than stock or you would rub. LMAO.



Here's what you posted:

That's my problem. I can't lower it on 19's, even a smidgen, especially with 35f/30r. With 20's I gain 3/4" in ride height from tires and then I can lower it 3/4" to 1" with suspension and get it back to stock or a smidgen lower than stock ride height. If I stayed at stock ride height with 35f/30r 19's the fender to tire clearance would be huge and really look goofy. Just my opinion. One trade off for another. I can't have the best of both worlds. There are a lot more wheel and tire combos available in 19's, I would much rather be on them. 20's just work better in my situation.

My suspension was done 2 years ago. I couldn't remember what the specs were. I found my paperwork and it showed 26-3/4". That's about an inch lower than stock ride height. And it did rub and if I backed straight out of my parking spot it would high center. And why are you so concerned about ride height, suspension set up is paramount.

[Zezus]

I think they look good on 20s
¯\_(ツ)_/¯

[OptionZero]

Depends on stance

[Spooler]

Originally Posted by OptionZero

Depends on stance

Yeap, get it wrong and it looks like a DONK. LMAO

[NorthStyle]

Lol. Not sure why my car looks lower than yours though (other than yours being all black) �� What wheel/tire sizes are you running?

[redondoaveb]

Originally Posted by NorthStyle

Lol. Not sure why my car looks lower than yours though (other than yours being all black) �� What wheel/tire sizes are you running?

Exact same specs as yours.

[haris73]

I know the 19” sport rays have been discussed to death already but I spent 2 hours reading forum posts and I’m only more confused than when I started. So if someone could just tell me what to do I would appreciate it.

I hate understeer far more than oversteer (I actually enjoy being able to whip out the back). I don’t mind the car feeling darty. I have 20mm+25mm spacers if necessary

Options are:
255/35
295/30
The “safe” choice that I will go with if no one can help. These seem to be somewhat popular however, I really don’t want to increase stagger and induce even more understeer.

265/35
295/30
Less popular choice, but I have no idea what sort of issues I would have running this

Lastly,
265/35
285/35
Some people run this, but opinions seem to be all over the place.

[Rusty]

Go wide as you can on the front. Think nothing less then a 275 if you are that worried about understeer.

[Memphis370Z]

Originally Posted by Rusty

Go wide as you can on the front. Think nothing less then a 275 if you are that worried about understeer.

A 275 on a 9" wide wheel?

[Rusty]

Originally Posted by Memphis370Z

A 275 on a 9" wide wheel?

Rim range is 9 to 10 inch. 9.5 being the sweet spot. Depending on which tire. I prefer the Mich PS4S.

[jchammond]

Originally Posted by haris73

I know the 19” sport rays have been discussed to death already but I spent 2 hours reading forum posts and I’m only more confused than when I started. So if someone could just tell me what to do I would appreciate it.

I hate understeer far more than oversteer (I actually enjoy being able to whip out the back). I don’t mind the car feeling darty. I have 20mm+25mm spacers if necessary

Options are:
255/35
295/30
The “safe” choice that I will go with if no one can help. These seem to be somewhat popular however, I really don’t want to increase stagger and induce even more understeer.

265/35
295/30
Less popular choice, but I have no idea what sort of issues I would have running this

Lastly,
265/35
285/35
Some people run this, but opinions seem to be all over the place.

What’s your suspension/alignment specs?