The "Will it fit?" thread

Crucified · 10-27-2016, 03:14 PM

Looking at Varrstoen 19x9.5 +12 F 19x10.5 +12 R

The rep at Varrstoen is telling me that 19x9.5 +12 will work up front since +22 are out of stock.

I have read tons of posts and it appears that anything under +15 is asking for trouble. Am I wrong?

OptionZero · 10-27-2016, 03:33 PM

Yes. It's fine. Might need some camber.

Most of those wheel are conservative as hell

/Angelo350Z/ · 10-28-2016, 08:13 AM

Quote:

Originally Posted by Crucified

Looking at Varrstoen 19x9.5 +12 F 19x10.5 +12 R

The rep at Varrstoen is telling me that 19x9.5 +12 will work up front since +22 are out of stock.

I have read tons of posts and it appears that anything under +15 is asking for trouble. Am I wrong?

The fronts will stick out a bit. I run 19x9.5 +20 with 265/35 tires and I can't even use a 5mm spacer. Not sure what size tires you plan on getting, but camber would help some. The rears are conservative IMO. I used 5mm spacers on my 19x11 +15 rears with 305/30 tires and it seems I could go a little wider.

OptionZero · 10-28-2016, 08:27 AM

You can run a spacer, but choose not to.

/Angelo350Z/ · 10-28-2016, 08:35 AM

Quote:

Originally Posted by OptionZero

You can run a spacer, but choose not to.

I could have, but the tires rubbed and stuck out too much for my taste. I wasn't going to get any more negative camber either. So there's that.

OptionZero · 10-28-2016, 10:53 AM

Yup. Like i said. You can. You didn't

Silevo · 10-28-2016, 04:35 PM

Work VS-XX
19x11 +15 275/35
19x12 +10 325/30

OptionZero · 10-28-2016, 05:21 PM

You'll need camber but it'll look dope

downgrading the tire size for more stretch will obviously make it an easier fit

OTW Z-Boy · 10-28-2016, 08:49 PM

Quote:

Originally Posted by Crucified

Looking at Varrstoen 19x9.5 +12 F 19x10.5 +12 R

The rep at Varrstoen is telling me that 19x9.5 +12 will work up front since +22 are out of stock.

I have read tons of posts and it appears that anything under +15 is asking for trouble. Am I wrong?

Yes the fronts will poke out past the fender more than you think... is there a lower offset for the rears you can do? At least it'll match better. And yes you will need quite a bit of camber to tuck the tires. More than what lowering spring will give.

pumpgas89 · 10-31-2016, 02:39 AM

planning to use the base 370z rear enkei wheels 18x9 +15 in all 4 corners. Drivers with different cars can attest, 275/35 on a 18x9" wide wheel still have performance advantages. I was just wondering if anyone is running the same tire and wheel, fitment and dimension configuration on the 370z platform. PICs if possible. curious about poke, any fender and camber adjustments to accommodate tire. also mention if your car is lowered because I'm still on stock suspension.

Side note: about to pull the trigger on a pair of rear wheels, actively looking on the internet. PM if selling in Ventura or LA county CA. Looking for Wheel Part Number: #62546 REAR Enkei Wheels for base 2010 370z

210Z · 11-01-2016, 11:19 PM

I just recently bought a 2012 base model and I'm looking into getting new wheels. I really like the look of the Forgestar CFV5 and I want to make sure the specs of the wheel I choose fit AND if I want to upgrade to the sport brakes later down the road that they will fit. Any help would be appreciated!

FRONT 19x9 +25 semi concave on 245/40/19 Bridgestone Potenzas
And
REAR 19x10 +15 deep concave on 275/35/19 Bridgestone Potenzas

OptionZero · 11-01-2016, 11:43 PM

they'll clear the brakes but look like poop
sunk as hell

210Z · 11-01-2016, 11:49 PM

Quote:

Originally Posted by OptionZero

they'll clear the brakes but look like poop
sunk as hell

Okay so what would you recommend as far as specs? I want to keep the same width of 9/10 F/R mainly for tire size.

lizzzys · 11-02-2016, 08:04 AM

Looking at getting Avant Garde F211,s can someone help with with what kind of offset i need to clear akebonos, was thinking of going 20x11.5 rear, 20x10 front, I'm open to tire sizes, was thinking something like 305/30 rear, 275,30 front? I have coils currently running factory spec camber. not looking to stretch tires or go much more than -2 camber.

thanks
Liam

/Angelo350Z/ · 11-02-2016, 11:33 AM

Quote:

Originally Posted by OptionZero

Yup. Like i said. You can. You didn't

Yes. And what's your point? We can do this all day.

10-27-2016, 03:14 PM	#1831 (permalink)
Crucified Base Member Join Date: Jun 2016 Location: SoCal I.E. Posts: 98 Drives: 16 370z Rep Power: 122	Looking at Varrstoen 19x9.5 +12 F 19x10.5 +12 R The rep at Varrstoen is telling me that 19x9.5 +12 will work up front since +22 are out of stock. I have read tons of posts and it appears that anything under +15 is asking for trouble. Am I wrong? Last edited by Crucified; 10-27-2016 at 03:21 PM.

10-28-2016, 10:53 AM	#1836 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,159 Drives: 15 370Z Nismo 6MT Rep Power: 203226	Yup. Like i said. You can. You didn't madeinjapan likes this.

10-31-2016, 02:39 AM	#1840 (permalink)
pumpgas89 Base Member Join Date: Oct 2016 Location: CA Posts: 38 Drives: 40th Anniversary Z Rep Power: 8	planning to use the base 370z rear enkei wheels 18x9 +15 in all 4 corners. Drivers with different cars can attest, 275/35 on a 18x9" wide wheel still have performance advantages. I was just wondering if anyone is running the same tire and wheel, fitment and dimension configuration on the 370z platform. PICs if possible. curious about poke, any fender and camber adjustments to accommodate tire. also mention if your car is lowered because I'm still on stock suspension. Side note: about to pull the trigger on a pair of rear wheels, actively looking on the internet. PM if selling in Ventura or LA county CA. Looking for Wheel Part Number: #62546 REAR Enkei Wheels for base 2010 370z __________________ Unwind, point and squirt.

11-02-2016, 08:04 AM	#1844 (permalink)
lizzzys Base Member Join Date: Dec 2014 Location: Toronto, Canada Posts: 35 Drives: 17 Audi SQ5 Rep Power: 10	Looking at getting Avant Garde F211,s can someone help with with what kind of offset i need to clear akebonos, was thinking of going 20x11.5 rear, 20x10 front, I'm open to tire sizes, was thinking something like 305/30 rear, 275,30 front? I have coils currently running factory spec camber. not looking to stretch tires or go much more than -2 camber. thanks Liam __________________ Stillen SC@10psi,Frozen boost,Russel An-lines,Stillen Oil Cooler,Stillen HFC,Stillen CBE,CJ motorsports fuel adapter & PG,Bosch 750 cc,Aero340lph,Stage 1 clutch and flywheel,Custom Tune,H&R 20mm spacers, stock Rays,Fugimura,amuse,Tommy Kaira,497whp/361ftlbs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official The370Z "Hot Girls with Hot cars" thread NSFW 01.01.09	AK370Z	Gentleman's Club	187	01-12-2011 12:24 AM
why did the thread "Sharing a bad experience with my 370Z" get closed?	TheSnakeJake	Nissan 370Z General Discussions	1	03-26-2010 11:35 PM
Why there isn't a "Monterey Blue"370Z thread?	Devil Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	08-24-2009 01:55 PM
Official "Guess the Stig's Time" Thread	ResIpsa	Nissan 370Z General Discussions	11	07-27-2009 09:45 PM
Official "Nissan 370Z spotted in Japan" Thread	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	120	05-01-2009 09:30 AM

10-27-2016, 03:33 PM	#1832 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,159 Drives: 15 370Z Nismo 6MT Rep Power: 203226	Yes. It's fine. Might need some camber. Most of those wheel are conservative as hell

10-28-2016, 08:27 AM	#1834 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,159 Drives: 15 370Z Nismo 6MT Rep Power: 203226	You can run a spacer, but choose not to.

10-28-2016, 04:35 PM	#1837 (permalink)
Silevo Base Member Join Date: Oct 2015 Location: Connecticut Posts: 11 Drives: 13 Nismo 370z Rep Power: 9	Work VS-XX 19x11 +15 275/35 19x12 +10 325/30

10-28-2016, 05:21 PM	#1838 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,159 Drives: 15 370Z Nismo 6MT Rep Power: 203226	You'll need camber but it'll look dope downgrading the tire size for more stretch will obviously make it an easier fit

11-01-2016, 11:19 PM	#1841 (permalink)
210Z Base Member Join Date: Oct 2016 Location: San Antonio Posts: 24 Drives: 2012-370z Rep Power: 8	I just recently bought a 2012 base model and I'm looking into getting new wheels. I really like the look of the Forgestar CFV5 and I want to make sure the specs of the wheel I choose fit AND if I want to upgrade to the sport brakes later down the road that they will fit. Any help would be appreciated! FRONT 19x9 +25 semi concave on 245/40/19 Bridgestone Potenzas And REAR 19x10 +15 deep concave on 275/35/19 Bridgestone Potenzas

11-01-2016, 11:43 PM	#1842 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,159 Drives: 15 370Z Nismo 6MT Rep Power: 203226	they'll clear the brakes but look like poop sunk as hell