Looking for a pretty aggressive offset... Let me know if this will work.

[TheWolfe]

Hey all

My build begins this summer and I'm starting off with air ride and subs. In the meantime, I'm currently running 25mm spacers on the 18" OEM wheels but I'm saving up for a set of Vossen ERA-1s.

Since they're custom made and the car will be on bags but daily driven, I was wondering if these wheel specs may be too aggressive for the Z and I should alter them a bit:

Front:
- Diameter: 20"
- Width: 10"
- Offset: +21
- Comparison pic:

Rear:
- Diameter: 20"
- Width: 11"
- Offset: +1
- Comparison pic:

I don't like the look of "tucked" wheels, so that's why I'm going for such aggressive specifications. The only other car on this forum I've found with those exact specs or similar with stock fenders is Juruki's 370z (which I used for the tire specs in the above calculations).

[OptionZero]

That's not that aggressive
I'm running 20x11 +15 in front w/ 275/30/20. This required -3 camber and pulled front fender
And
20x12 +20 in back w/ 325/25/20. Rear has more clearance to go even with that spec


Your rears are fine

You can go more aggressive in front if you want

Caveat:
You MUST get SPL parts adjustable arms to dial in camber and other alignment
Roll fenders and relocate mounting tab

After that you can go much more aggressive

Example:
Work Meister S1 3P 19x10-2 and 19x11-7

CarbonFZ ran 19x10-2 and 19x11-7. He was static and had to run aggressive stretch, but it was done

On bags u have an advantage as well

[TheWolfe]

Originally Posted by OptionZero

Example:
Work Meister S1 3P 19x10-2 and 19x11-7

Hah! That's hilarious, I'm the first user that responded in that thread you linked.

Thanks, man. But what's the mounting tab you're talking about relocating? And with the setup I suggested, I'm assuming I'll need camber arms for the rears, but is there anything else I'd need? My car will be (for the most part) daily driven, so I don't want anything overly aggressive, but since it's on air, I think I'll have some leeway when it comes to that.

[OptionZero]

On air, it doesn't matter. When driving there can be plenty of clearance

Rears:
Just go to SPL parts and get all three arms for the back. You alignment guy will thank you

Bumper tab is where the bumper connects to the fender. It is more an issue when static, as it rubs when under compression

[TheWolfe]

Originally Posted by OptionZero

Rears:
Just go to SPL parts and get all three arms for the back. You alignment guy will thank you

How about the fronts?

[OptionZero]

SPL front upper control arm provides camber and caster alignment
U can run pretty much any size after that

[TheWolfe]

Originally Posted by OptionZero

SPL front upper control arm provides camber and caster alignment
U can run pretty much any size after that

Sweet And for clarification, the rear arms you were talking about would be traction, toe, and camber?

That would be:
- Z1 Motorsports 370Z / G37 Adjustable Rear Traction Arms
- SPL 370Z / G37 Billet Rear Camber Arms
- SPL 370Z / G37 Billet Rear Toe Arms

and NOT:
- SPL Titanium Rear Traction Links (370Z / G37)
- SPL Titanium Rear Camber Links (370Z / G37)
- SPL Titanium Rear Toe Links (370Z / G37)

Correct? Or do those do the same thing?

---

Sorry for all the questions btw, just want to make 100% sure before committing

---

Edit: It appears those do the same thing, it's just billet vs. titanium

[OptionZero]

They are the same. SPL uses billet aluminum and titanium in their arms

Traction arms are for those who convert to true type coilovers
The midlinks are for those who keep an OEM setup

[TheWolfe]

Alright, so I ought to be getting camber and toe arms for the rear and the control arm for the front then it seems. Thanks! Anything to make alignment easy

[AlWakRa]

Originally Posted by OptionZero

They are the same. SPL uses billet aluminum and titanium in their arms

Toe arms are for those who convert to true type coilovers
The midlinks are for those who keep an OEM setup

Corrected

[AlWakRa]

You could pass on the midlink and go spc toe bolt. Also, I don't think the air suspension compatible with spl midlink, they needs 2.5" springs, as I read. Unless they are true type and not oem.

Traction arm isn't needed.

The difference between billet and titanium, billet is a little lighter and it is the newer version, no performance difference.

[OptionZero]

actually for bags . . . yeah i dunno if you use the midlink or the toe link. call SPL and i'm sure they'll figure it out