Problems keeping TPS sensors on the bands for aftermarket wheels.

Spooler · 08-21-2018, 06:52 PM

I am having a heck of a time keep my TPS sensors on the bands. The bands keep breaking off where the TPS mounts. This is becoming one big pain in the butt. Anybody had the same issues? I just about ready to deal with the TPMS light. I have a tire gauge. LOL

370zBLAST · 08-21-2018, 06:55 PM

Band? Should just be an actual sensor

Sent from my Pixel 2 XL using Tapatalk

OhioYJ · 08-21-2018, 07:04 PM

Before I dealt with a light, I'd try something like this.

They make TPMS in all sorts of designs, even regular rubber pull through designs. That's what I'm using on my Winter wheels. Not sure what you're dealing with on your wheels that made you go with bands, but not many OEMs other than a few Fords used them that I know of. You may be figuring out why its not a common solution.

370zBLAST · 08-21-2018, 07:08 PM

I have aftermarket wheels and tpms sensor and my z is fine.

Sent from my Pixel 2 XL using Tapatalk

Optimiser · 08-21-2018, 08:36 PM

This is what I'm using.

Steelmate, Steelmate Australia & NZ- TPMS, Parking Sensor Specialist, Promata Ph-01, Promata Phone holder

OptionZero · 08-21-2018, 08:44 PM

didn't you get Works?

how are you not able to run regular TPMS?

Spooler · 08-21-2018, 09:16 PM

I have SSR MS3 wheels. They are not drilled for the TPS sensor, hence why I am using the bands. For you guys that don't know what I am talking about, they are bands that wrap around the inside of the wheel where you mount the TPS sensors.

Like this.

https://www.tpmsdirect.com/TPMS_Moun...tion_a/289.htm

nis350 · 08-21-2018, 10:32 PM

I used the bands to install the oem tpms in the Work wheels with no issue at all. I don't have any installation detail. The tire shop did the install.

Quote:

Originally Posted by Spooler

I have SSR MS3 wheels. They are not drilled for the TPS sensor, hence why I am using the bands. For you guys that don't know what I am talking about, they are bands that wrap around the inside of the wheel where you mount the TPS sensors.

Like this.

https://www.tpmsdirect.com/TPMS_Moun...tion_a/289.htm

Spooler · 08-21-2018, 11:27 PM

Quote:

Originally Posted by nis350

I used the bands to install the oem tpms in the Work wheels with no issue at all. I don't have any installation detail. The tire shop did the install.

Well I guess they don't like do 90+ steady. LOL

OptionZero · 08-22-2018, 12:33 AM

That's a pretty massive oversight from SSR. 2018 and selling wheels that can't fit to Tpms?

LennyK · 08-22-2018, 08:06 AM

Soooooo The Question Is - Can This Be Turned Off Or Reset DIY?

I Put On 19" Rims And Am Also Dealing With This Light

Tire Guy Said He Can Fix It - Didn't Go There Yet

Dealer Said He Can Fix It - Won't Go There...

Is It Easy To Reset If You Have The "Programmer"

Spooler · 08-22-2018, 11:36 AM

Quote:

Originally Posted by OptionZero

That's a pretty massive oversight from SSR. 2018 and selling wheels that can't fit to Tpms?

I don't think it is massive oversight, annoyance Yes. Besides, our TPMS system is just an annoyance anyway. It's not like we can see what the pressure is in each wheel. So it is a government mandate I can actually do without.

SouthArk370Z · 08-22-2018, 11:59 AM

Quote:

Originally Posted by Spooler

... Like this.
https://www.tpmsdirect.com/TPMS_Moun...tion_a/289.htm

Those look like worm-gear clamps to me. Is it possible that they were over-tightened during original installation?

Quote:

Originally Posted by Spooler

... It's not like we can see what the pressure is in each wheel. So it is a government mandate I can actually do without.

I can't imagine why Nissan left TPS out of the info display; especially on a car billed as a sports car. The data is already there and programming the display for four more variables shouldn't be that difficult.

IIRC, all four pressures are available in the ECM (or BCM) - you just need an OBD/CAN reader that will access them.

Spooler · 08-22-2018, 01:21 PM

The mount that holds the TPMS is what is breaking. Not the worm clamp.

nis350 · 08-22-2018, 10:28 PM

perhaps you can try the better quality bands. the sensor is so light and don't see why it keep coming off.

I have mine for almost 4 years and have driven the car at 90 without any issues.

Quote:

Originally Posted by Spooler

The mount that holds the TPMS is what is breaking. Not the worm clamp.

08-21-2018, 06:52 PM	#1 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,505 Drives: 2013 Nismo 370z Rep Power: 2684391	Problems keeping TPS sensors on the bands for aftermarket wheels. I am having a heck of a time keep my TPS sensors on the bands. The bands keep breaking off where the TPS mounts. This is becoming one big pain in the butt. Anybody had the same issues? I just about ready to deal with the TPMS light. I have a tire gauge. LOL

08-21-2018, 08:44 PM	#6 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,159 Drives: 15 370Z Nismo 6MT Rep Power: 203226	didn't you get Works? how are you not able to run regular TPMS? __________________ OptionZero Build Thread

08-21-2018, 09:16 PM	#7 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,505 Drives: 2013 Nismo 370z Rep Power: 2684391	I have SSR MS3 wheels. They are not drilled for the TPS sensor, hence why I am using the bands. For you guys that don't know what I am talking about, they are bands that wrap around the inside of the wheel where you mount the TPS sensors. Like this. https://www.tpmsdirect.com/TPMS_Moun...tion_a/289.htm Last edited by Spooler; 08-21-2018 at 09:21 PM.

08-22-2018, 12:33 AM	#10 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,159 Drives: 15 370Z Nismo 6MT Rep Power: 203226	That's a pretty massive oversight from SSR. 2018 and selling wheels that can't fit to Tpms? sx moneypit likes this. __________________ OptionZero Build Thread

08-22-2018, 08:06 AM	#11 (permalink)
LennyK Enthusiast Member Join Date: May 2015 Location: Mountain Top Posts: 268 Drives: 370Z Roadster 2010 Rep Power: 207	Soooooo The Question Is - Can This Be Turned Off Or Reset DIY? I Put On 19" Rims And Am Also Dealing With This Light Tire Guy Said He Can Fix It - Didn't Go There Yet Dealer Said He Can Fix It - Won't Go There... Is It Easy To Reset If You Have The "Programmer" __________________ *** ROADSTER * TOURING * 2010 * PLATINUM * GRAPHITE * * Z * NISSAN * 370Z * NISSAN * Z ***

08-21-2018, 06:55 PM	#2 (permalink)
370zBLAST Base Member Join Date: Feb 2014 Location: ct Posts: 241 Drives: 09 370z 6spd Rep Power: 11	Band? Should just be an actual sensor Sent from my Pixel 2 XL using Tapatalk

08-21-2018, 07:04 PM	#3 (permalink)
OhioYJ Enthusiast Member Join Date: Nov 2016 Location: Ohio Posts: 261 Drives: 2016 370Z Rep Power: 952	Before I dealt with a light, I'd try something like this. They make TPMS in all sorts of designs, even regular rubber pull through designs. That's what I'm using on my Winter wheels. Not sure what you're dealing with on your wheels that made you go with bands, but not many OEMs other than a few Fords used them that I know of. You may be figuring out why its not a common solution.

08-21-2018, 07:08 PM	#4 (permalink)
370zBLAST Base Member Join Date: Feb 2014 Location: ct Posts: 241 Drives: 09 370z 6spd Rep Power: 11	I have aftermarket wheels and tpms sensor and my z is fine. Sent from my Pixel 2 XL using Tapatalk

08-21-2018, 08:36 PM	#5 (permalink)
Optimiser Enthusiast Member Join Date: Mar 2013 Location: Australia Posts: 453 Drives: 2012 Nissan 370Z MT Rep Power: 20144	This is what I'm using. Steelmate, Steelmate Australia & NZ- TPMS, Parking Sensor Specialist, Promata Ph-01, Promata Phone holder

08-22-2018, 01:21 PM	#14 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,505 Drives: 2013 Nismo 370z Rep Power: 2684391	The mount that holds the TPMS is what is breaking. Not the worm clamp.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aftermarket wheel TPMS sensors.	Spooler	Wheels & Tires	1	06-13-2017 09:54 PM
keeping the 19 Rays Sport Wheels?	nis350	Nissan 370Z General Discussions	11	02-17-2015 12:42 AM
Been keeping an eye out for good deals on gauges/sensors	dmhenderson	MAZOC	3	06-23-2013 02:33 PM
keeping stock wheels question	jasonhoutx	Wheels & Tires	1	05-14-2009 02:20 PM