i need help with fitmen

Ken_nismo34z · 01-11-2018, 09:32 AM

i have work emotion cr2p front 19 9.5/rear 10.5 +22 and im on bag 3h lift kit but i want the rims to be more out to the fender if u know wat i mean here a photo of it now. If you think i need spacer how much??and any brand or kinds??

Sent from my iPhone using Tapatalk

OptionZero · 01-11-2018, 04:06 PM

Read any of the ******* wheel fitment threads

How did u not plan this out before getting bags?
Those sizes would be sunk on stock suspension

NorthStyle · 01-11-2018, 04:23 PM

With the way your tires sit with the car air'd out... it looks like you'd need a spacer over an inch/25mm. But, it could just be the faux flares giving making it appear like you have more space than there actually is.

I'd measure, buy a cheap set of spacers in multiple sizes for testing, find your fitment, then sell everything and with your newly acquired knowledge buy a new set of wheels with proper offsets.

....or do like O.Z. said and read through some of the wheel fitment threads.

Ghost116 · 01-15-2018, 11:55 AM

Buys wheels without any concept of wat to buy....

Sent from my iPhone using Tapatalk

jsavvy · 01-19-2018, 12:00 AM

Less camber? Look at the relation of the poke of the bottom of the wheels VS the top. Those specs are near flush- if your camber isnt so negative.

OptionZero · 01-19-2018, 11:54 AM

its not a camber issue, those sizes are just trash

AND he's on bags, so its REALLY not a camber issue

OTW Z-Boy · 01-19-2018, 05:34 PM

Cheaper way... spacers
Right way... lower offsets

OptionZero · 01-19-2018, 05:48 PM

spacers are not practical in his case

Spooler · 01-19-2018, 05:59 PM

You need to take a picture of it lifted up on the bags at riding height to see how much you need to adjust. It appears new wheels are order. Those offsets are way off.

OTW Z-Boy · 01-19-2018, 06:48 PM

Quote:

Originally Posted by OptionZero

spacers are not practical in his case

And the drop on bags is “practical”?

What’s your thoughts though on the spacers to resolve the issue? No go?

k67p67 · 01-19-2018, 07:14 PM

If you're intent on keeping those wheels, you could lose the fender flares and add 20mm bolt-on spacers front and rear.

01-11-2018, 09:32 AM	#1 (permalink)
Ken_nismo34z Base Member Join Date: Oct 2016 Location: Ohio Posts: 35 Drives: 15 nissan 370z nismo Rep Power: 8	i need help with fitmen i have work emotion cr2p front 19 9.5/rear 10.5 +22 and im on bag 3h lift kit but i want the rims to be more out to the fender if u know wat i mean here a photo of it now. If you think i need spacer how much??and any brand or kinds?? Sent from my iPhone using Tapatalk

01-11-2018, 04:06 PM	#2 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,159 Drives: 15 370Z Nismo 6MT Rep Power: 203226	Read any of the ******* wheel fitment threads How did u not plan this out before getting bags? Those sizes would be sunk on stock suspension __________________ OptionZero Build Thread

01-11-2018, 04:23 PM	#3 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,235 Drives: 2011 370Z Nismo Rep Power: 24276	With the way your tires sit with the car air'd out... it looks like you'd need a spacer over an inch/25mm. But, it could just be the faux flares giving making it appear like you have more space than there actually is. I'd measure, buy a cheap set of spacers in multiple sizes for testing, find your fitment, then sell everything and with your newly acquired knowledge buy a new set of wheels with proper offsets. ....or do like O.Z. said and read through some of the wheel fitment threads. iDaRkkO likes this.

01-19-2018, 11:54 AM	#6 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,159 Drives: 15 370Z Nismo 6MT Rep Power: 203226	its not a camber issue, those sizes are just trash AND he's on bags, so its REALLY not a camber issue __________________ OptionZero Build Thread

01-19-2018, 05:34 PM	#7 (permalink)
OTW Z-Boy A True Z Fanatic Join Date: Mar 2012 Location: Temecula Ca Posts: 1,225 Drives: 14 Nismo 370z #495 Rep Power: 750	Cheaper way... spacers Right way... lower offsets __________________ 2014: Nismo 370z #495 Magnetic Black - Stillen Gen3 CAI \| SPL F/R Camber Arms \| HKS Hypermax IV \| JDM Rear Fog Light \|GT-R Push Start Button \| Z1 2 Piece D/S \| Illuminated Kicks \| Tommykaira \| Work VS-XX BKB Step Lip +23/+13 19" 9.5/11 \| Fast Intentions RHFC TDX CBE 12" CF \| EcuTek

01-15-2018, 11:55 AM	#4 (permalink)
Ghost116 Base Member Join Date: Aug 2015 Location: Ontario Posts: 167 Drives: Up coming Rep Power: 366	Buys wheels without any concept of wat to buy.... Sent from my iPhone using Tapatalk

01-19-2018, 12:00 AM	#5 (permalink)
jsavvy Base Member Join Date: Nov 2016 Location: SoCal Posts: 49 Drives: 14 370z MB 6MT Rep Power: 8	Less camber? Look at the relation of the poke of the bottom of the wheels VS the top. Those specs are near flush- if your camber isnt so negative.

01-19-2018, 05:48 PM	#8 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,159 Drives: 15 370Z Nismo 6MT Rep Power: 203226	spacers are not practical in his case __________________ OptionZero Build Thread

01-19-2018, 05:59 PM	#9 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,502 Drives: 2013 Nismo 370z Rep Power: 2684391	You need to take a picture of it lifted up on the bags at riding height to see how much you need to adjust. It appears new wheels are order. Those offsets are way off.

01-19-2018, 07:14 PM	#11 (permalink)
k67p67 Enthusiast Member Join Date: Oct 2016 Location: Rancho Cucamonga, CA Posts: 290 Drives: 2017 Nismo Tech 6MT Rep Power: 3936	If you're intent on keeping those wheels, you could lose the fender flares and add 20mm bolt-on spacers front and rear. __________________ 2017 370Z Nismo Tech 6MT Work \| Motordyne \| Powertrix \| Swift \| Michelin \| Takeda \| Hotchkis \| RJM \| Voodoo13 \| SPL \| SPC \| Z1 Motorsports \| ZSpeed \| Morimoto \| Craft Square \| Hawk Performance \| Kanjo Spec.D \| Raceseng

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode