Spacers installed=no traction control?

SouthArk370Z

My guess is that a wheel speed sensor got disconnected or misaligned.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

jcosta79

This. That's why I asked if he did the work himself and if replacing the studs was involved.

__________________
2012 PW NISMO #0559 - GT Spec Brace Kit - Swift Springs - ARK TP & Invidia CBE K&N Intake - UpRev Tune - 15mm Z1 Spacers & Studs - StopTech Slotted Rotors & SS Lines - ZSpeed CMAK with Stage 2 Clutch and Lightweight Flywheel

SouthArk370Z

I'm not at all certain that a wheel speed sensor(s) is the problem. Seems to me that a bad sensor would cause the dash light to be on all the time. I haven't looked at that section of the FSM in quite a while and don't remember what the system does on sensor failure. But the sensor wiring/alignment is pretty easy to check and the wheels were worked on, so that's the first place I'd look.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma