Work VS-XX Wheel Fitment

[Drowzy]

So I recently purchased a set of work vs xx because the deal was just too good to pass up, however I have concerns about the fitment. The wheels are 19x8 all around, +51 and +48 offset. I'm just worried about
How it'll look or if it'll actually fit properly. I tried looking for answers but it seems most people go staggered and have the rear wheels wider, which I ideally would've liked. Also, I'm not too familiar with offsets and such so I'm kinda in the dark here. Would these wheels look ok on the car? I need some opinions, thanks guys.

[AntiVenom]

dude... you'd need some insane spacers just to get to factory offsets/flushness, particularly for the rear. not to mention the tire sizes would be really weak. again I think this would be most noticeable in the rear.

I'd vote you sell them and get something else or get your stock wheels painted and get some better/wider tires.

[kentstuh]

Originally Posted by Drowzy

So I recently purchased a set of work vs xx because the deal was just too good to pass up, however I have concerns about the fitment. The wheels are 19x8 all around, +51 and +48 offset.

DANG!! what was the deal that you could pass up???
Here is a picture of my VS XX step lips 19x9.5 +22 19x10.5 +19 w/ 15mm spacer

[chops]

Originally Posted by AntiVenom

dude... you'd need some insane spacers just to get to factory offsets/flushness, particularly for the rear. not to mention the tire sizes would be really weak. again I think this would be most noticeable in the rear.

I'd vote you sell them and get something else or get your stock wheels painted and get some better/wider tires.

what this guy said. spacers for 19x8 and +48/+51?! you'd need a 30mm spacer in the rear and a 20mm spacer in the front. then you'd have to deal with skinny *** tires because the wheels are only 8inches wide. sell em

Sell asap

[Drowzy]

Originally Posted by kentstuh

DANG!! what was the deal that you could pass up???
Here is a picture of my VS XX step lips 19x9.5 +22 19x10.5 +19 w/ 15mm spacer

Damn those are nice! And I paid basically 2000 shipped for all four. I thought it was a pretty good deal and I had my fingers crossed that they would look decent but I kinda knew deep down that it wouldn't work too well.

So I guess the general consensus is to sell them, as much as thats not what I wanted to hear you guys all seem right. Damn!

[chops]

Originally Posted by Drowzy

Damn those are nice! And I paid basically 2000 shipped for all four. I thought it was a pretty good deal and I had my fingers crossed that they would look decent but I kinda knew deep down that it wouldn't work too well.

So I guess the general consensus is to sell them, as much as thats not what I wanted to hear you guys all seem right. Damn!

if you're balling out on wheels, why would you buy wheels with poor fitment and specs? an 8 inch wheel has no business on a Z unless its a winter wheel. the max tire you'd be able to run safely is likely a 235 or at maximum a 245. that'd be ok for the front, but for the rear, that would look absolutely ridiculous

[Drowzy]

Originally Posted by chops

if you're balling out on wheels, why would you buy wheels with poor fitment and specs? an 8 inch wheel has no business on a Z unless its a winter wheel. the max tire you'd be able to run safely is likely a 235 or at maximum a 245. that'd be ok for the front, but for the rear, that would look absolutely ridiculous

To be honest I didn't think it through, I saw the price and bought them on impulse. I'll just try to sell them and get my money back at this point.

[Zbrah]

Wheelflip.com

[moore.speed]

Post out to the Acura/Honda market.. An S2000 owner might hop on something like this.

[nis350]

This setup is worse than the stock 18's.

Originally Posted by Drowzy

So I recently purchased a set of work vs xx because the deal was just too good to pass up, however I have concerns about the fitment. The wheels are 19x8 all around, +51 and +48 offset. I'm just worried about

[nis350]

What size is the rear tire? Does it rub at all? Do you have a pic showing how far the rear tire stick out from the fender?

Originally Posted by kentstuh

DANG!! what was the deal that you could pass up???
Here is a picture of my VS XX step lips 19x9.5 +22 19x10.5 +19 w/ 15mm spacer

[kentstuh]

Originally Posted by nis350

What size is the rear tire? Does it rub at all? Do you have a pic showing how far the rear tire stick out from the fender?

It doesn't rub at all. It sticks out about 1/4 of a cm. This is the only picture I got so far...

[kentstuh]

Originally Posted by Drowzy

Damn those are nice! And I paid basically 2000 shipped for all four. I thought it was a pretty good deal and I had my fingers crossed that they would look decent but I kinda knew deep down that it wouldn't work too well.

So I guess the general consensus is to sell them, as much as thats not what I wanted to hear you guys all seem right. Damn!

Hey give me a picture of them. I think I am able to help you sell them. I got a co worker with a civic and might be interested.

[kenchan]

Originally Posted by Drowzy

So I recently purchased a set of work vs xx because the deal was just too good to pass up, however I have concerns about the fitment. The wheels are 19x8 all around, +51 and +48 offset. I'm just worried about
How it'll look or if it'll actually fit properly. I tried looking for answers but it seems most people go staggered and have the rear wheels wider, which I ideally would've liked. Also, I'm not too familiar with offsets and such so I'm kinda in the dark here. Would these wheels look ok on the car? I need some opinions, thanks guys.

will fit fine if you have a sedan..