Front end wheel spacers problem

Z4TONY · 02-10-2015, 04:36 AM

Kenchan please can you tell me what dremel accessori you used to dremel down the back of the wheel is there a DIY I am planning on changing the wheels in a year or so and didn't want to dremel the studs..thanks

kenchan · 02-10-2015, 01:40 PM

you mean like grinder..?

you can also use grinders made for drills. those come with a lot more coarse material to speed up the process.

the only grinding i did was like 2mm, just enough to clear the studs on my 19 sport wheels. ive not seen the back of the 18's so make sure you dont take off too much material to weaken it structurally.

Z4TONY · 02-10-2015, 02:14 PM

Cool I hear u..thx

Z4TONY · 03-08-2015, 03:43 PM

Ok guys I took off the wheels and no signs of stud rubbing. The wheel studs don't even get close to touch the wheels. Not sure what to do. Rotors are new..maybe the wheels themselves but when I take the spacers off the vibration stops

Brendan · 03-08-2015, 04:00 PM

Are you using a torque wrench? Make sure the torque applied to each bolt that holds on the spacers is the same.

Z4TONY · 03-08-2015, 05:03 PM

Brendan yes I torque then to 90..Zipper good idea lol

Merv · 03-08-2015, 10:56 PM

Sounds like the spacers themselves. What ones do you have. I have ichibas and they're garbage. The only reason I haven't changed them out is because I plan on getting rims with the proper offset. Also,are your spacers hubcentric? Do they have a lip that sticks out past the wheel spacer itself that rides just inside the bore on your rim?

Z4TONY · 03-09-2015, 05:38 AM

Merv. I bought the ichibas V2 yes hubcentric. I thought they are 1 of the best on the market that is why I got them. I did buy no name Hubcentric aluminium ones before same thing rear is perfect front i get vibration above 60. That's why I get these thinking the brand name is better

Merv · 03-09-2015, 07:51 AM

Well I shouldn't really say there garbage,but there are better brands out there. Sometimes you just get a bad batch. I don't know if it's been mentioned,but try putting the back spacers up front. See if that stops the shimmy.
Edit: something else you could try,(and I've never heard of this being done),is go to a tire shop that does high speed balancing and see if they can't attach the spacer to the back of the wheel and balance it that way.

Z4TONY · 03-09-2015, 08:19 AM

Cool thanks will do

03-08-2015, 10:56 PM	#7 (permalink)
Merv Track Member Join Date: Dec 2013 Location: Vancouver B.C Posts: 518 Drives: 11 GM grey sport tou Rep Power: 15	Sounds like the spacers themselves. What ones do you have. I have ichibas and they're garbage. The only reason I haven't changed them out is because I plan on getting rims with the proper offset. Also,are your spacers hubcentric? Do they have a lip that sticks out past the wheel spacer itself that rides just inside the bore on your rim? __________________ Swift springs \| upgraded headlights \| stillen gen3 cai \| FI HFC's and FI CBE \| ecutek tune in the mail!

03-09-2015, 07:51 AM	#9 (permalink)
Merv Track Member Join Date: Dec 2013 Location: Vancouver B.C Posts: 518 Drives: 11 GM grey sport tou Rep Power: 15	Well I shouldn't really say there garbage,but there are better brands out there. Sometimes you just get a bad batch. I don't know if it's been mentioned,but try putting the back spacers up front. See if that stops the shimmy. Edit: something else you could try,(and I've never heard of this being done),is go to a tire shop that does high speed balancing and see if they can't attach the spacer to the back of the wheel and balance it that way. __________________ Swift springs \| upgraded headlights \| stillen gen3 cai \| FI HFC's and FI CBE \| ecutek tune in the mail! Last edited by Merv; 03-09-2015 at 08:00 AM.

03-09-2015, 08:19 AM	#10 (permalink)
Z4TONY Base Member Join Date: Sep 2014 Location: Virginia Posts: 45 Drives: 370z Roadster Tourin Rep Power: 11	Cool thanks will do Merv likes this.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NIB Ichiba V2 20mm wheel spacers front/rear	NS370Z	Canada	9	04-07-2014 06:22 AM
ICHIBA Version II wheel spacers, front??	NS370Z	Brakes & Suspension	11	08-19-2013 03:06 PM
[FOR SALE] front wheel spacers and studs for 370Z	Z28fred	Parts for sale (Private Classifieds)	0	05-15-2013 02:22 PM
Ichiba V2 Wheel Spacers with Built in Studs DO fir the front	chuckd05	Wheels & Tires	49	11-24-2011 12:05 PM
Using wheel spacers to even up front and rear track	The Arp	Wheels & Tires	8	05-10-2010 11:16 PM

02-10-2015, 04:36 AM	#1 (permalink)
Z4TONY Base Member Join Date: Sep 2014 Location: Virginia Posts: 45 Drives: 370z Roadster Tourin Rep Power: 11	Kenchan please can you tell me what dremel accessori you used to dremel down the back of the wheel is there a DIY I am planning on changing the wheels in a year or so and didn't want to dremel the studs..thanks

02-10-2015, 01:40 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	you mean like grinder..? you can also use grinders made for drills. those come with a lot more coarse material to speed up the process. the only grinding i did was like 2mm, just enough to clear the studs on my 19 sport wheels. ive not seen the back of the 18's so make sure you dont take off too much material to weaken it structurally.

02-10-2015, 02:14 PM	#3 (permalink)
Z4TONY Base Member Join Date: Sep 2014 Location: Virginia Posts: 45 Drives: 370z Roadster Tourin Rep Power: 11	Cool I hear u..thx

03-08-2015, 03:43 PM	#4 (permalink)
Z4TONY Base Member Join Date: Sep 2014 Location: Virginia Posts: 45 Drives: 370z Roadster Tourin Rep Power: 11	Ok guys I took off the wheels and no signs of stud rubbing. The wheel studs don't even get close to touch the wheels. Not sure what to do. Rotors are new..maybe the wheels themselves but when I take the spacers off the vibration stops

03-08-2015, 04:00 PM	#5 (permalink)
Brendan Track Member Join Date: Apr 2013 Location: Colorado Posts: 646 Drives: Poor man's Porsche Rep Power: 543	Are you using a torque wrench? Make sure the torque applied to each bolt that holds on the spacers is the same.

03-08-2015, 05:03 PM	#6 (permalink)
Z4TONY Base Member Join Date: Sep 2014 Location: Virginia Posts: 45 Drives: 370z Roadster Tourin Rep Power: 11	Brendan yes I torque then to 90..Zipper good idea lol

03-09-2015, 05:38 AM	#8 (permalink)
Z4TONY Base Member Join Date: Sep 2014 Location: Virginia Posts: 45 Drives: 370z Roadster Tourin Rep Power: 11	Merv. I bought the ichibas V2 yes hubcentric. I thought they are 1 of the best on the market that is why I got them. I did buy no name Hubcentric aluminium ones before same thing rear is perfect front i get vibration above 60. That's why I get these thinking the brand name is better