First Arizona Thread....

[hoodust]

Originally Posted by XwChriswX

Don't really know any shops in the North Valley, but in Chandler you've got Vivid, that would be your best bet. CZP is in Central phoenix, but I'm not sure if they do Coil install/alignments...

Thanks Chrisw... I actually saved some scratch by managing to set my ride height in back. Car handles squirrely over 80, and thanks to a thread on the forum I know it's because I only replaced the rear tires (Conti DWS, which have a WAY higher treadwear than stock). Other than that I am loving my new BC coilovers!

[XwChriswX]

Originally Posted by hoodust

Thanks Chrisw... I actually saved some scratch by managing to set my ride height in back. Car handles squirrely over 80, and thanks to a thread on the forum I know it's because I only replaced the rear tires (Conti DWS, which have a WAY higher treadwear than stock). Other than that I am loving my new BC coilovers!

Did you get a camber arm set installed too with your coils? The stock arms aren't able to adjust for lowering adequately.

Also, be careful with the BC's, there is a thread or two around here about some negative qualities of them, so just might wanna peek through to be safe.

[TommyL]

hello! i just got to chandler few days ago! im drivng a 2010 nismo 370z.. looking forward to see you guys.

[hoodust]

Originally Posted by TommyL

hello! i just got to chandler few days ago! im drivng a 2010 nismo 370z.. looking forward to see you guys.

Welcome! I'm north valley (near desert ridge) but I wave at all Z's

Speaking of, when are you north guys getting together again? I keep missing the Blue Agave meets...

[vividracing]

Originally Posted by hoodust

Welcome! I'm north valley (near desert ridge) but I wave at all Z's

Speaking of, when are you north guys getting together again? I keep missing the Blue Agave meets...

whats the deal with these Blue Agave Meets? Might have to roll out for one.

[XwChriswX]

Originally Posted by vividracing

whats the deal with these Blue Agave Meets? Might have to roll out for one.

If they're in reference to what I think they are, there was never a 'meet' there lol And there isn't as far as I know of cause all the ones that would attend have left there.

[hoodust]

Originally Posted by XwChriswX

Did you get a camber arm set installed too with your coils? The stock arms aren't able to adjust for lowering adequately.

Also, be careful with the BC's, there is a thread or two around here about some negative qualities of them, so just might wanna peek through to be safe.

I got the SPC rear camber kit. They work, but to fix the toe network alignment had to give me around -2 degrees of camber... If that's what you mean by negative qualities, lol. We'll see how fast THAT eats my new tires. I actually got the BC's because a lot of folks recommended them on some threads here.

Let me know if you come across the negative thread.

[hoodust]

Originally Posted by XwChriswX

If they're in reference to what I think they are, there was never a 'meet' there lol And there isn't as far as I know of cause all the ones that would attend have left there.

We'll that WAS a long time ago that folks here were talking about meeting there... Admittedly I haven't been active on the forums for some time. I think Frost is mad ^_^

[XwChriswX]

Originally Posted by hoodust

I got the SPC rear camber kit. They work, but to fix the toe network alignment had to give me around -2 degrees of camber... If that's what you mean by negative qualities, lol. We'll see how fast THAT eats my new tires. I actually got the BC's because a lot of folks recommended them on some threads here.

Let me know if you come across the negative thread.

LoL Ok good, you got a camber kit. Don't want you wearing out your tires before you're supposed to.

Originally Posted by hoodust

We'll that WAS a long time ago that folks here were talking about meeting there... Admittedly I haven't been active on the forums for some time. I think Frost is mad ^_^

You have no idea...

[hoodust]

Originally Posted by XwChriswX

LoL Ok good, you got a camber kit. Don't want you wearing out your tires before you're supposed to.

Yeah, my rears were already bald on the inside but in the 180 miles until i could get new tires and an alignment the steel belting was showing and there was finely ground tire covering my bumper!

You have no idea...

Lol, nice one. Shh, apparently he's a mod now so he might be listening >_<

[XwChriswX]

Originally Posted by hoodust

Lol, nice one. Shh, apparently he's a mod now so he might be listening >_<

Lol I Know he's listening. And he knows I'm speaking the truth...

[conor1123]

Just saw a white 370z around chandler. Looked like an amuse body kit from the front + gtr looking fender scoops. WHERE YOU AT ?

[marrim]

Originally Posted by conor1123

Just saw a white 370z around chandler. Looked like an amuse body kit from the front + gtr looking fender scoops. WHERE YOU AT ?

That would be me. I think? I was a long way from home. Chandler seems like another country from a guy livin in the north west area.

Went to Drag and Driff at firebird raceway last night.

[DEpointfive0]

Does anyone in Phoenix have an OEM start button I can have/buy for cheap?

[hoodust]

Originally Posted by DEpointfive0

Does anyone in Phoenix have an OEM start button I can have/buy for cheap?

Not I, I prefer stock, but if you need a functional replacement people have willingly switched out for the oem GTR button for a pretty reasonable fee Motorsport! GTR Push Button Ignition Switch, 09-12 370Z - The Z Store! Nissan-Datsun 240Z-260Z-280Z-280ZX-300ZX(Z31/Z32)-350Z-370Z Parts Or you might find that thread and ask one of the folks who switched for the GTR.