Intake

Trips · 09-01-2013, 02:15 PM

I've had this happen to me with that breaking.

What I did was used needle nose pliers, And removed the broken tube from the hose

I used Krazy Glue to glue it back into the original position, And I lubed the inside of the hose, And slid the broken filter back on.

I did this about 6 months ago, And its still holding.

Try not even touch it if you can.

This can serve as temp or perm. Lol

lhinojos · 09-01-2013, 02:33 PM

Quote:

Originally Posted by Trips

I've had this happen to me with that breaking.

What I did was used needle nose pliers, And removed the broken tube from the hose

I used Krazy Glue to glue it back into the original position, And I lubed the inside of the hose, And slid the broken filter back on.

I did this about 6 months ago, And its still holding.

Try not even touch it if you can.

This can serve as temp or perm. Lol

Hmm sounds legit.
Ill try that as a temp. My z is a daily but I'm forced to drive the gas chugging Titan right now because I don't wanna drive the z without the piece.

09-01-2013, 02:15 PM	#1 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	I've had this happen to me with that breaking. What I did was used needle nose pliers, And removed the broken tube from the hose I used Krazy Glue to glue it back into the original position, And I lubed the inside of the hose, And slid the broken filter back on. I did this about 6 months ago, And its still holding. Try not even touch it if you can. This can serve as temp or perm. Lol lhinojos likes this. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I have K&N Cold Air Intake - Want to swap for Factory Intake	Troyz	Texas	2	03-27-2013 09:48 AM
370z Injen Speed Pro Series Intake \| AEM ETI Intake stupid pricing	Tunerz_Store	Exhaust/Intake	11	11-01-2010 01:43 PM