Test Pipes none resonated.

///PureSwank · 05-27-2013, 04:47 PM

Ill let you know of and when I install them. But I won't let you know what happen so that you can learn off my mistakes!!! Bwahahahahahha!! Unless your giving me a tip. Deal?

Sent from my SPH-L710 using Tapatalk 2

Just kidding

zefaulter · 05-27-2013, 05:14 PM

Lol Damn I thought you were nice haha

///PureSwank · 05-27-2013, 05:51 PM

Bwahahahahaha (evil laugh)

Sent from my SPH-L710 using Tapatalk 2

370zbob · 05-27-2013, 08:22 PM

Just fitted F.I Rtp and they are awsome , done 2k on them and no cel .
Just remember that when u fit test pipes that u will get a hiss when the revs drop below 2k.
Other than that , F***ing AWSOME .
Did the instal myself and took me 1hr 20mins

///PureSwank · 05-27-2013, 08:52 PM

Quote:

Originally Posted by 370zbob

Just fitted F.I Rtp and they are awsome , done 2k on them and no cel .
Just remember that when u fit test pipes that u will get a hiss when the revs drop below 2k.
Other than that , F***ing AWSOME .
Did the instal myself and took me 1hr 20mins

Do you have a video of it? How much did your run for?

Sent from my SPH-L710 using Tapatalk 2

zefaulter · 05-29-2013, 06:04 PM

Quote:

Originally Posted by 370zbob

Just fitted F.I Rtp and they are awsome , done 2k on them and no cel .
Just remember that when u fit test pipes that u will get a hiss when the revs drop below 2k.
Other than that , F***ing AWSOME .
Did the instal myself and took me 1hr 20mins

How did you Remove the demon bolt? That's very fast

370zbob · 05-29-2013, 09:52 PM

The best way is that u have the correct tools to do the job , use an 30" extention 3/8 for the bolts that face into the engine bay , i used the gear wrench for the bottom ones the gearwrench had a piviot on the ring end .
Had driven the car then jacked it up to get it nice and warm and they fell off no problems .
Its a pitty that ur not in So Cal would help u out .
If u need help u can call me just pm ur number and would call u .
Also when it came to the O2 sensors be very very gentle , i stripped the threads on the sensor and had to buy a die to cut the threads .

///PureSwank · 05-29-2013, 10:53 PM

Quote:

Originally Posted by 370zbob

The best way is that u have the correct tools to do the job , use an 30" extention 3/8 for the bolts that face into the engine bay , i used the gear wrench for the bottom ones the gearwrench had a piviot on the ring end .
Had driven the car then jacked it up to get it nice and warm and they fell off no problems .
Its a pitty that ur not in So Cal would help u out .
If u need help u can call me just pm ur number and would call u .
Also when it came to the O2 sensors be very very gentle , i stripped the threads on the sensor and had to buy a die to cut the threads .

Is there a DIY video for this?

Sent from my SPH-L710 using Tapatalk 2

370zbob · 05-30-2013, 01:28 AM

You don't need a vid , the instructions from tony from F.I are all u need .
I did it in a good time due to wrenching on cars since I was 10 and driving at the sametime .
All u need is good sockets and extension .
All the nuts and bolts are 14mm . U need to remove the bracket for the cats .
The cats u unbolt the 2 bolts from under the car then get the last one from the engine bay ..........
I think I should make a vid or take some picks this weekend .

///PureSwank · 05-30-2013, 02:03 AM

Quote:

Originally Posted by 370zbob

You don't need a vid , the instructions from tony from F.I are all u need .
I did it in a good time due to wrenching on cars since I was 10 and driving at the sametime .
All u need is good sockets and extension .
All the nuts and bolts are 14mm . U need to remove the bracket for the cats .
The cats u unbolt the 2 bolts from under the car then get the last one from the engine bay ..........
I think I should make a vid or take some picks this weekend .

Make a video and it'll prolly be stickied as a DIY. I can't find a good step by step video of how to do the complete installation with sensors and stuff.

Sent from my SPH-L710 using Tapatalk 2

Wonka2581 · 05-30-2013, 02:32 AM

Ok guys I got FI cbe stillen g3 and have a set of FI res test pipes on the shelf, do I need a tune if I install test pipes? People have told me yes, is this true?

DEpointfive0 · 05-30-2013, 03:07 AM

Quote:

Originally Posted by Wonka2581

Ok guys I got FI cbe stillen g3 and have a set of FI res test pipes on the shelf, do I need a tune if I install test pipes? People have told me yes, is this true?

I ran them with 0 issues Will!
Just install them dammit!!! You'll thank me later!!!

370zbob · 05-30-2013, 03:08 AM

Talking with tony from F.I u do not need a tune .
It is an option if u want more hp but I have been monitoring the air to fuel ration on my car and its not gone lean . Sum might say different bit it's up to u

370zbob · 05-30-2013, 03:09 AM

I agree him

Wonka2581 · 05-30-2013, 09:29 PM

Quote:

Originally Posted by 370zbob

Talking with tony from F.I u do not need a tune .
It is an option if u want more hp but I have been monitoring the air to fuel ration on my car and its not gone lean . Sum might say different bit it's up to u

lol ok, But what mods do you have? Are you running the same setup as me? intake, CBE and TP?

And Andrew I know right lmao...

05-27-2013, 04:47 PM	#16 (permalink)
///PureSwank Track Member Join Date: Mar 2012 Location: Earth Posts: 954 Drives: 2009 370z Rep Power: 16	Ill let you know of and when I install them. But I won't let you know what happen so that you can learn off my mistakes!!! Bwahahahahahha!! Unless your giving me a tip. Deal? Sent from my SPH-L710 using Tapatalk 2 Just kidding __________________

05-27-2013, 05:51 PM	#18 (permalink)
///PureSwank Track Member Join Date: Mar 2012 Location: Earth Posts: 954 Drives: 2009 370z Rep Power: 16	Bwahahahahaha (evil laugh) Sent from my SPH-L710 using Tapatalk 2 __________________

05-30-2013, 02:32 AM	#26 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2613	Ok guys I got FI cbe stillen g3 and have a set of FI res test pipes on the shelf, do I need a tune if I install test pipes? People have told me yes, is this true? __________________ "I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] F.I non resonated cbe/ non resonated test pipes	jcollado9278	Parts for sale (Private Classifieds)	3	03-21-2013 12:35 AM
[FOR SALE] F.I. resonated test pipes	nismochiq	Parts for sale (Private Classifieds)	3	10-16-2012 10:21 PM
[WTB] GTM Resonated Test Pipes	Chi_g35	Parts for sale (Private Classifieds)	0	12-14-2011 04:49 PM
Fast Intentions Non Resonated Cat Back Exhaust with Non Resonated Test Pipes	Joe711	Intake/Exhaust	10	06-01-2011 02:58 PM
non-resonated test pipes	mrdino77	Intake/Exhaust	2	03-26-2010 11:58 AM

05-27-2013, 05:14 PM	#17 (permalink)
zefaulter A True Z Fanatic Join Date: Jan 2013 Location: Toronto, Canada Posts: 1,983 Drives: 40th 370Z Rep Power: 29	Lol Damn I thought you were nice haha

05-27-2013, 08:22 PM	#19 (permalink)
370zbob Base Member Join Date: Jan 2012 Location: So Cal Posts: 85 Drives: Like a lunatic Rep Power: 15	Just fitted F.I Rtp and they are awsome , done 2k on them and no cel . Just remember that when u fit test pipes that u will get a hiss when the revs drop below 2k. Other than that , F***ing AWSOME . Did the instal myself and took me 1hr 20mins

05-29-2013, 09:52 PM	#22 (permalink)
370zbob Base Member Join Date: Jan 2012 Location: So Cal Posts: 85 Drives: Like a lunatic Rep Power: 15	The best way is that u have the correct tools to do the job , use an 30" extention 3/8 for the bolts that face into the engine bay , i used the gear wrench for the bottom ones the gearwrench had a piviot on the ring end . Had driven the car then jacked it up to get it nice and warm and they fell off no problems . Its a pitty that ur not in So Cal would help u out . If u need help u can call me just pm ur number and would call u . Also when it came to the O2 sensors be very very gentle , i stripped the threads on the sensor and had to buy a die to cut the threads .

05-30-2013, 01:28 AM	#24 (permalink)
370zbob Base Member Join Date: Jan 2012 Location: So Cal Posts: 85 Drives: Like a lunatic Rep Power: 15	You don't need a vid , the instructions from tony from F.I are all u need . I did it in a good time due to wrenching on cars since I was 10 and driving at the sametime . All u need is good sockets and extension . All the nuts and bolts are 14mm . U need to remove the bracket for the cats . The cats u unbolt the 2 bolts from under the car then get the last one from the engine bay .......... I think I should make a vid or take some picks this weekend .

05-30-2013, 03:08 AM	#28 (permalink)
370zbob Base Member Join Date: Jan 2012 Location: So Cal Posts: 85 Drives: Like a lunatic Rep Power: 15	Talking with tony from F.I u do not need a tune . It is an option if u want more hp but I have been monitoring the air to fuel ration on my car and its not gone lean . Sum might say different bit it's up to u

05-30-2013, 03:09 AM	#29 (permalink)
370zbob Base Member Join Date: Jan 2012 Location: So Cal Posts: 85 Drives: Like a lunatic Rep Power: 15	I agree him