Nissan 370Z Forum
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Tuning (http://www.the370z.com/tuning/)
-   -   298WHP on the Dyno today! (http://www.the370z.com/tuning/75046-298whp-dyno-today.html)

isayimandrew 08-09-2013 12:37 PM
my car put out 280 whp stock and 290 whp with the FI exhaust. Noticed he was pulling in 4th though.

Kingbaby 08-09-2013 12:56 PM
4th is what it should be in! Most do third because it's a 6mt for some reason :dunno:

Chuck33079 08-09-2013 01:01 PM
Quote:
Originally Posted by Kingbaby (Post 2439520)
4th is what it should be in! Most do third because it's a 6mt for some reason :dunno:
Never heard of doing it in third. I was under the impression it was ideal to dyno in whatever gear is closest to 1:1, but some use fourth because the wheel speed in fifth gets pretty high.

nismo13807 08-09-2013 11:02 PM
nice numbers!

DEpointfive0 08-09-2013 11:21 PM
Quote:
Originally Posted by Kingbaby (Post 2439520)
4th is what it should be in! Most do third because it's a 6mt for some reason :dunno:
5th is what it SHOULD be in, and SOME run 4th because they don't want to run the dyno to 160MPH

luigi90210 08-10-2013 12:07 AM
Quote:
Originally Posted by DarkJak (Post 2438824)
I think 290-ish is average for the Nismos. Nice results!
most of the dynos i have seen of stock nismos usually are within 290whp to 300whp

synolimit 08-10-2013 12:26 AM
Quote:
Originally Posted by DEpointfive0 (Post 2440307)
5th is what it SHOULD be in, and SOME run 4th because they don't want to run the dyno to 160MPH
For a base run though I thought it had to be 4th, 155mph limiter.

tonythetiger 08-10-2013 12:38 PM
bolt ons air intake headers and exhaust with tune

Maduro 08-11-2013 10:06 AM
Those are great numbers, tried putting my 2013 370z sport package A/T with Stillen G3 coldair intake - Stillen C/B - Berk test pipes on the dyno yesterday for and up rev but the strangest thing happened the ECU refused to take any mod. to it, stood all day trying to work thing out to no avail. Anyone have an Ideal why this is happening

Baer383 08-11-2013 10:24 AM
Quote:
Originally Posted by Maduro (Post 2441484)
Those are great numbers, tried putting my 2013 370z sport package A/T with Stillen G3 coldair intake - Stillen C/B - Berk test pipes on the a dyno yesterday for and up rev but the strangest thing happened the CPU refused to take any mod. to it stood all day trying to work thing out to no avail. Anyone have an Ideal why this is happening
You may have the wrong Rom.

Maduro 08-13-2013 10:24 PM
????
 
What is ROM

Baer383 08-14-2013 12:11 AM
Quote:
Originally Posted by Maduro (Post 2445033)
What is ROM
It is what your tune is written on then you flash it on the ECU (engine control unit,read only memory).

Maduro 09-07-2013 09:54 AM
Quote:
Originally Posted by Baer383 (Post 2445169)
It is what your tune is written on then you flash it on the ECU (engine control unit,read only memory).
Thanks, was online looking it up

Maduro 09-15-2013 10:23 PM
Just had an Uprev tune the Numbers were 300 whp and 275 torque. was looking to break the 300 whp, was on N/A Brags and saw cars with the same mods doing well over 300 ex; 320 to 340+

synolimit 09-15-2013 10:33 PM
Quote:
Originally Posted by Maduro (Post 2489114)
Just had an Uprev tune the Numbers were 300 whp and 275 torque. was looking to break the 300 whp, was on N/A Brags and saw cars with the same mods doing well over 300 ex; 320 to 340+
Dyno doesn't mean anything if you don't have a before and after. Also trap speed will give you real info.


All times are GMT -5. The time now is 04:19 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2