Nissan 370Z Forum - EcuTek ProECU Group Buy

Page 9 of 18

« First

Last »

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Tuning (http://www.the370z.com/tuning/)

- - EcuTek ProECU Group Buy (http://www.the370z.com/tuning/72600-ecutek-proecu-group-buy.html)

dP3NGU1N

07-12-2013 02:29 AM

^do you have an oil cooler?

Chuck33079

07-12-2013 07:05 AM

Quote:

Originally Posted by arnoldas (Post 2401107)

is it bad if i went for a couple of runs against my friend while im still not fully tuned (on my second or 3rd file), was at redline most the time and got to the point where my car went into limp mode at 260 degrees and coolant started to boil in the overflow tank

Yes, on several levels. First I wouldn't be running it that hard until the tune is 100%, but I'm sure they err on the side of safety. Second, either stop racing people on the street or stop posting about it. Word it differently to avoid abuse here. Lastly, keep a closer eye on your gauges. You should have backed off it and let it cool down between runs. There's no reason to run it into limp mode. I hope you're running a good synthetic, and I'd change the oil immediately if it were my car. And people wonder why I won't buy a used sports car.

arnoldas

07-12-2013 11:24 AM

i stopped after each run but i guess i didnt give it enough time to cool off, and im running readline full synthetic, and i am putting an oil cooler on next oil change that i do.

Dynotronics1

07-12-2013 12:24 PM

Quote:

Originally Posted by ZeN (Post 2398659)

Dynotronics, can you confirm one very important thing with mothership. Since my car is a JDM car, its OBD2 plug is locked. In other words, only Consult 3 can have access to it. I've tried with so many OBD2 bluetooth kit trying to retrieve PID/Data but everytime it poll for it the ECU just gave nothing. This has been confirm with all members in Malaysia/Brunei. We're abit unlucky since our country didn't enforce the OBD2 compliance.

Can you check if its ok ? I dont want to spend hundreds of dollar and found out that i could'nt even connect it. Another question would be can ECUTEK enable Mode 0 on the ECU, basically allowing me to use any kind of OBD2 product to datalog.

Ok spoke to Mervyn at Ecutek this morning, and he says it's not an issue for the Asian market cars. We will be able to read and write the rom image.

arnoldas

07-20-2013 10:55 PM

anyone else get a check engine light when started getting tuned with ecutek?

helidriver

07-22-2013 05:42 AM

Ordered!

tiger123

08-02-2013 11:42 PM

Just placed my order. Finally pulled the trigger on this. Can't wait to get my Z professionally tuned. :happydance:

Believe my car is running rich at the moment. Can't wait the AFR worked out and working the way it should. :tup:

Let me know once shipped.

Thanks.

scionide

08-14-2013 01:56 PM

Soo how close is ecutek to having launch control, flat foot shifting etc. ready now?

faya	10-08-2013 12:09 PM

i am. shot you a pm sir. thanks!

Chuck33079

10-08-2013 12:11 PM

Quote:

Originally Posted by scionide (Post 2446069)

Soo how close is ecutek to having launch control, flat foot shifting etc. ready now?

I'd love to know where they stand as far as boost control and all of the other features that were promised. Been a whole lot of silence on the Ecutek front lately.

shivers

10-08-2013 01:57 PM

GTR and FR-S/BRZ get regular updates while not much has been said since the 370Z release. Maybe because the others are the "it" cars right now and that's where they focus development.

scionide

10-08-2013 04:59 PM

Quote:

Originally Posted by Chuck33079 (Post 2520450)

I'd love to know where they stand as far as boost control and all of the other features that were promised. Been a whole lot of silence on the Ecutek front lately.

I emailed Ecutek about this last week. Their answer was, due to other projects, 370 development got slowed down, but they're aiming to get out these features before the end of this year.

:ugh2:

Chuck33079

10-08-2013 05:16 PM

Quote:

Originally Posted by scionide (Post 2520805)

I emailed Ecutek about this last week. Their answer was, due to other projects, 370 development got slowed down, but they're aiming to get out these features before the end of this year.

:ugh2:

Yeah. It went from "any day now" to "before the end of the year". Looks like they're giving up on taking significant market share from Uprev. Guess I'll schedule my re-tune with Uprev.

Sh0velMan

10-08-2013 09:00 PM

Quote:

Originally Posted by shivers (Post 2520591)

GTR and FR-S/BRZ get regular updates while not much has been said since the 370Z release. Maybe because the others are the "it" cars right now and that's where they focus development.

Could have told you this would happen.

Same **** happened with SPL re: their front upper arms. Full line of BRZ **** released before their Z34 arms.

This is how its going to be from here on out, boys. Sorry to say.

seymore4

10-08-2013 11:06 PM

Quote:

Originally Posted by Chuck33079 (Post 2520450)

Been a whole lot of silence on the Ecutek front lately.

Funny how they were all over the forum from multiple accounts until they got $$ from all the members who were willing to shell out... now? where are the promised features that were "days away"... where are the independent dyno sheets?? how many months has it been? meanwhile Uprev continues to deliver consistent, reliable tunes every day. :shakes head:

All times are GMT -5. The time now is 02:04 PM.

Page 9 of 18

« First

Last »

Show 40 post(s) from this thread on one page