Hypertech Part#62004 Review

Hypertech · 09-13-2011, 10:25 AM

When a manufacturer post comparison info it never has the same effect as the end user posting. We publish rear wheel dyno charts for every vehicle we support.

Hypertech · 09-13-2011, 10:28 AM

Quote:

Originally Posted by gaveup

it would be nice for the company who produces the product to actually show a comparative dyno. Might actually help sell the unit more (With healthy numbers, I'd buy it over uprev).

I just want to make it clear in here that I am not doubting this product. I think it would be awesome if it gains some power (even better if it is closer to the canned uprev tune). It's hard to understand any actual gains based on a review without any dyno numbers to back it up (and to make sure the AFR is in check as well...who knows where the hypertech puts you at with mods).

They should totally send me one to test. I'd have had it dynoed the first week to make sure it's not hurting anything (but I am sure it is conservative enough). What parameters in the ECU is it actually editing? Seems to be it has more to do with throttle response than anything else. I remember a thread on here where people were buying that one part that increased voltage for the accelerator and they were making it sound like the car picked up power. Butt dyno can be very deceiving.

30 day no questions asked return policy should give you plenty of time to dyno

fxroar · 09-16-2011, 01:18 AM

Quote:

Originally Posted by Hypertech

Send me your sn# and contact info in a PM and I will hook you up with what you need..

Please save up for the custom tune, I would love for you to compare them on the dyno.

You got a PM. I apologize for the late response. I'd love to have UpRev done, but I have already saved up for GTM Stage 1 SC. Just waiting for full control of VVEL.

I guess member gaveup deleted his post.

He mentioned the module that increases the voltage.. That's Sprint Booster.. The thing is.. it makes it so you don't have to floor the pedal to get 100% throttle (Drive-by-wire sucks) but that DOES NOT get rid of the "hesitation" even with VDC off. I don't know how Hypertech did it with their module without full control of VVEL, but my car no longer suffers from this problem.

370z_2910 · 09-18-2011, 07:11 AM

is this hypertune already pre-set tuned for all z?

is it possible to update or change the tune setting?

fxroar · 09-18-2011, 11:03 AM

Quote:

Originally Posted by 370z_2910

is this hypertune already pre-set tuned for all z?

is it possible to update or change the tune setting?

Unfortunately no. I'm still waiting for a PM back from Hypertech. The module has a canned tuned good for stock up to mildly tuned Z. I'm trying to get a bit more custom out of it.. I'm still waiting

370z_2910 · 09-19-2011, 09:01 PM

Compare with the uprev...

How much different will the hypertech cost including tuning and dyno?

100...200..300..??

fxroar · 09-20-2011, 08:53 PM

Quote:

Originally Posted by 370z_2910

Compare with the uprev...

How much different will the hypertech cost including tuning and dyno?

100...200..300..??

Depending on how much you can get a hold of your modules for either product. Both are one tune for one car unless you purchase another license (UpRev Only). Module to module the UpRev cost more, but you have the ability to smoothen out your power and torque curves depending on how much dyno tune time you spend.

I'm still waiting for member Hypertech to see if we can incorporate a more categorized preset tunes to squeeze out a few more HP/TQ using the current module.

LOU@AMPLIFIED · 09-22-2011, 10:53 PM

If any of you guys want to try it, i have 2 Hypertech modules in stock.
I had this on my G37 for a year before i went boosted. I can honestly say its worth every penny.

Also, there is no charge to go back to your stock MAP.

) You can easily install and remove changes with the module including decreasing your red line (valet mode), even limiting your top speed for safety

Pm me for pricing

efuseakay · 09-24-2011, 11:27 PM

I haveone for my 7AT G37xS sedan. Love it for what it is. Throttle lag is very minimal now and there is definitely more hp/tq. It's been quite useful too, for those times I've had to valet. Set the top speed to 25mph...

sboden · 09-25-2011, 08:51 AM

Quote:

Originally Posted by efuseakay

I haveone for my 7AT G37xS sedan. Love it for what it is. Throttle lag is very minimal now and there is definitely more hp/tq. It's been quite useful too, for those times I've had to valet. Set the top speed to 25mph...

Never thought of that as a use....nice one

efuseakay · 09-28-2011, 11:23 PM

Yeah it takes a minute or two, but its quite handy for valet.

LOU@AMPLIFIED · 09-29-2011, 04:19 PM

i just got word from the Main Engineer that the intake MAPS will be released soon.

I still have two programmers on special if anyone is interested

thanks

efuseakay · 10-01-2011, 09:34 PM

Quote:

Originally Posted by LOU@AMPLIFIED

i just got word from the Main Engineer that the intake MAPS will be released soon.

I still have two programmers on special if anyone is interested

thanks

No kidding! Sweet!

08g37s · 01-22-2012, 09:09 PM

Im never on this site im always on myg37 but i herd that hypertech updated their maps and we now have takeda and stillen CAI maps!!! Time to update our hypertech!

fxroar · 01-22-2012, 10:23 PM

Quote:

Originally Posted by 08g37s

Im never on this site im always on myg37 but i herd that hypertech updated their maps and we now have takeda and stillen CAI maps!!! Time to update our hypertech!

Good to know. Thanks for the info. Rep going your way sir

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
max energy hypertech programmer anyone?	zchristopher	Tuning	3	06-21-2011 02:09 PM
WTB: Hypertech or BullyDog or UpRev	menzzer37	Wanted	2	05-05-2011 06:35 AM
Two part Z review on Jalopnik	Pushing_Tin	Nissan 370Z General Discussions	0	07-24-2009 01:55 AM

09-13-2011, 10:25 AM	#1 (permalink)
Hypertech Base Member Join Date: Apr 2010 Location: Memphis TN Posts: 5 Drives: 370Z Rep Power: 17	When a manufacturer post comparison info it never has the same effect as the end user posting. We publish rear wheel dyno charts for every vehicle we support.

09-18-2011, 07:11 AM	#4 (permalink)
370z_2910 Base Member Join Date: Sep 2009 Location: BRUNEI Posts: 127 Drives: 370Z Rep Power: 17	is this hypertune already pre-set tuned for all z? is it possible to update or change the tune setting?

09-19-2011, 09:01 PM	#6 (permalink)
370z_2910 Base Member Join Date: Sep 2009 Location: BRUNEI Posts: 127 Drives: 370Z Rep Power: 17	Compare with the uprev... How much different will the hypertech cost including tuning and dyno? 100...200..300..??

09-22-2011, 10:53 PM	#8 (permalink)
LOU@AMPLIFIED Vendorship temporary revoked due to payment issue Join Date: Nov 2008 Location: so cal Posts: 982 Drives: 08 g37/09 370z Rep Power: 0	If any of you guys want to try it, i have 2 Hypertech modules in stock. I had this on my G37 for a year before i went boosted. I can honestly say its worth every penny. Also, there is no charge to go back to your stock MAP. ) You can easily install and remove changes with the module including decreasing your red line (valet mode), even limiting your top speed for safety Pm me for pricing

09-24-2011, 11:27 PM	#9 (permalink)
efuseakay Enthusiast Member Join Date: Mar 2010 Location: The DAYNGA ZONE! Posts: 404 Drives: 2010 G37xS Sedan Rep Power: 17	I haveone for my 7AT G37xS sedan. Love it for what it is. Throttle lag is very minimal now and there is definitely more hp/tq. It's been quite useful too, for those times I've had to valet. Set the top speed to 25mph...

09-28-2011, 11:23 PM	#11 (permalink)
efuseakay Enthusiast Member Join Date: Mar 2010 Location: The DAYNGA ZONE! Posts: 404 Drives: 2010 G37xS Sedan Rep Power: 17	Yeah it takes a minute or two, but its quite handy for valet.

09-29-2011, 04:19 PM	#12 (permalink)
LOU@AMPLIFIED Vendorship temporary revoked due to payment issue Join Date: Nov 2008 Location: so cal Posts: 982 Drives: 08 g37/09 370z Rep Power: 0	i just got word from the Main Engineer that the intake MAPS will be released soon. I still have two programmers on special if anyone is interested thanks

01-22-2012, 09:09 PM	#14 (permalink)
08g37s Base Member Join Date: Aug 2011 Location: san diego Posts: 1 Drives: G37 sport Rep Power: 15	Im never on this site im always on myg37 but i herd that hypertech updated their maps and we now have takeda and stillen CAI maps!!! Time to update our hypertech!