Autoclub speedway in car, 9/8/13

clintfocus

yeah if your car has less over all grip (from either lack of suspension mods and/or tire grip) then a higher turn 1 entry is better/safer, since it widens the turn out and you use the down hill of the oval to your advantage. the disadvantage is you have a longer distance to travel. so its all strategy figuring out how low in the oval you can go without causing you to scrub speed and/or lose traction.

i used 3rd in turn 3-4, 2nd in the hair pin. 3rd had enough power band to pull me out of 4 fine.

i stay low on the oval straight cause its a shorter distance to travel. i was on the lower side of turn 1-2 oval because honestly, i hadnt been on ACS for 2.5 years, never been there with the Z ever, i was playing it safe and didnt wanna be that close to the wall lol.

for ACS specifically, i need a more aggresive front pad, i was losing alot of time in the brake zones

GSS138

Thanks man, good info. I did hit second a few times on T3, but later in the day decided to stay in 3rd. I am still 50/50 on it but the problem is really suspension. I body roll like a MoFo in turn 3 to make that little tuck move to line up 4. I hit the 4 exit correctly only once and understand it, but most of the time I just got too wiggly in T3 to really exit correctly. Only other option is to scrub more speed and hit 2nd gear to exit.

T1 T2 I never felt unsafe or uncomfortable on, the highest speed I remember seeing was ~130 and I went to 3/4 throttle just to be safe.

Tires were not the problem, brakes and suspension I definitely felt the limitations-much more than any other track I have been on. ACS will definitely check your hardware and lives up to its name as a professional racetrack.

That being said I don't think I have ever had more fun in my life lol. Hope to see you out at a track day soon.

__________________
Current Mods: Vorpal Weapon +5.