2012 oil cooler at Willowsprings

martin82 · 12-17-2011, 09:58 PM

It was in the 40's today so it was pretty cool, oil temp never went over 255-260. Wonder how it will hold up to 70 degrees or so.

Went with stock pads and they actually were not as bad as I though but will need to update the pads, lines, fluid, and stiffen up the suspension it is way to soft in the rear and sway bars!

modme · 12-17-2011, 10:04 PM

uh....255-260 is pretty darn high for oil temp, especially with an oil cooler. Definitely will overheat at 70 degrees. Seems like the stock oil cooler is not up to the task.

Red__Zed · 12-17-2011, 10:09 PM

interesting. curious to see how it will hold up to warmer temps.

martin82 · 12-17-2011, 10:17 PM

yeah we'll see, when doing a few laps oil temps don't shoot that high but once ur pushing 9+ laps it gets there.

ChrisSlicks · 12-18-2011, 07:36 AM

Yeah, we pretty much knew this would be the case. The factory oil cooler is the one that was being used in Australia and the Middle East on the previous year models and the 350 - good for enthusiastic street driving, but not designed for the track. It is oil to water and is very efficient but it is rather tiny.

SiRay6 · 12-19-2011, 02:25 AM

Thanks for your post Martin. Bummed out the results weren't better...especially since this is the coldest time of the year. It will only be worse at 70 deg plus.

does any know of any 2012 owners with air cooled oil coolers installed?

-Ray

sig11 · 12-19-2011, 09:18 AM

Quote:

Originally Posted by ChrisSlicks

Yeah, we pretty much knew this would be the case. The factory oil cooler is the one that was being used in Australia and the Middle East on the previous year models and the 350 - good for enthusiastic street driving, but not designed for the track. It is oil to water and is very efficient but it is rather tiny.

I wonder if it would be possible to just install a larger core on those cars since it's already plumbed and all. Could make for a really nice cooling setup.

370Zsteve · 12-19-2011, 09:34 AM

Quote:

Originally Posted by sig11

I wonder if it would be possible to just install a larger core on those cars since it's already plumbed and all. Could make for a really nice cooling setup.

hmmmm

ChrisSlicks · 12-19-2011, 09:39 AM

Quote:

Originally Posted by sig11

I wonder if it would be possible to just install a larger core on those cars since it's already plumbed and all. Could make for a really nice cooling setup.

Yes I think if there was larger aftermarket oil to water cooler that takes its place that could be a viable solution. I think for many people that would be enough. Some would start to find the limits of the stock radiator at that point but now that there are a couple of radiator upgrade options that isn't all bad.

martin82 · 12-19-2011, 12:48 PM

my radiator temperature never moved an inch, I have ordered an obd2 wire so I can monitor it next time also.

ChrisSlicks · 12-19-2011, 01:26 PM

Quote:

Originally Posted by martin82

my radiator temperature never moved an inch, I have ordered an obd2 wire so I can monitor it next time also.

I've only had a high water temp on the hottest of days and in longer harder sessions. In the Spring, Fall and Winter it isn't likely to move much. The good news is that water temp corrects extremely quickly if you back off.

martin82 · 12-19-2011, 03:27 PM

I will have to research now how to add an oil cooler now or cap off the 2012 oil cooler they added............

SiRay6 · 12-19-2011, 03:48 PM

stock water temp gauges are never accurate...moving up one or two dots could mean a bigger jump in temps...best to use aftermarket gauge and probe in my opinion.

I'm curious if fixing the cooling/coolant issue will help lower the oil since stock is water cooled. Cooler the water, maybe it can cool the oil more effectively as well?

Let us know what you're thinking for the oil cooler if/when you get one Martin. I'm very very interested in how you are going to bypass the stock setup, cap it off, or implement the stock in the setup.

-Ray

Shamu · 12-19-2011, 04:51 PM

Wow thats really hot given how cool it was. I dont get much over 235 degrees on days that are 75 to 85 degrees. What kind of lap times were you turning? Hard to believe stock pads and brake fluid were holding up, but maybe cool weather helped?

martin82 · 12-19-2011, 10:11 PM

I was lapping around 1:41-1:43 at the big track, I could push it harder but didn't wanna overkill it with all stock setup and end up with no brakes and crashing!
Here's a picture of the front tires to get an idea how I was pushing it. I had 2,100 miles before the track now i'm at around 2,400 with maybe 1-2 more times left on those front tires.

12-17-2011, 09:58 PM	#1 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	2012 oil cooler at Willowsprings It was in the 40's today so it was pretty cool, oil temp never went over 255-260. Wonder how it will hold up to 70 degrees or so. Went with stock pads and they actually were not as bad as I though but will need to update the pads, lines, fluid, and stiffen up the suspension it is way to soft in the rear and sway bars!

12-17-2011, 10:04 PM	#2 (permalink)
modme Enthusiast Member Join Date: Mar 2009 Location: NY Posts: 345 Drives: G37 Rep Power: 16	uh....255-260 is pretty darn high for oil temp, especially with an oil cooler. Definitely will overheat at 70 degrees. Seems like the stock oil cooler is not up to the task. __________________ GTM Twin Turbo Stage 2\|GTR Turbo/Engine Gauges\|KW V3 Coilovers\|HKS Exhaust\|Oil Cooler\| Vossen CV1

12-18-2011, 07:36 AM	#5 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	Yeah, we pretty much knew this would be the case. The factory oil cooler is the one that was being used in Australia and the Middle East on the previous year models and the 350 - good for enthusiastic street driving, but not designed for the track. It is oil to water and is very efficient but it is rather tiny. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

12-19-2011, 10:11 PM	#15 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	I was lapping around 1:41-1:43 at the big track, I could push it harder but didn't wanna overkill it with all stock setup and end up with no brakes and crashing! Here's a picture of the front tires to get an idea how I was pushing it. I had 2,100 miles before the track now i'm at around 2,400 with maybe 1-2 more times left on those front tires. Last edited by martin82; 12-19-2011 at 10:24 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how does the 2012 factory oil cooler stand up to track/auto x	SiRay6	Track / Autocross / Drifting / Dragstrip	71	12-11-2015 03:53 PM
2012 Z Factory Oil Cooler - PIC AND PART NUMBERS INSIDE	'10Anamoly	Engine & Drivetrain	113	07-17-2014 04:03 AM
2012 370Z All Models Include Oil Cooler	PJRabbit	Nismo 370Z	49	12-22-2011 07:50 AM
2012 Model Will Have OIl Cooler	jpit	Nissan 370Z General Discussions	150	10-12-2011 09:46 PM
Will Nissan's addition of an oil cooler in 2012 make modded older Z's stock?	SeattleLion	Nissan 370Z General Discussions	14	10-09-2011 10:24 PM

12-17-2011, 10:09 PM	#3 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 119	interesting. curious to see how it will hold up to warmer temps.

12-17-2011, 10:17 PM	#4 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	yeah we'll see, when doing a few laps oil temps don't shoot that high but once ur pushing 9+ laps it gets there.

12-19-2011, 02:25 AM	#6 (permalink)
SiRay6 Base Member Join Date: Nov 2011 Location: Diamond Bar, CA Posts: 63 Drives: 12 370z Gunmetal 6MT Rep Power: 13	Thanks for your post Martin. Bummed out the results weren't better...especially since this is the coldest time of the year. It will only be worse at 70 deg plus. does any know of any 2012 owners with air cooled oil coolers installed? -Ray

12-19-2011, 12:48 PM	#10 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	my radiator temperature never moved an inch, I have ordered an obd2 wire so I can monitor it next time also.

12-19-2011, 03:27 PM	#12 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	I will have to research now how to add an oil cooler now or cap off the 2012 oil cooler they added............

12-19-2011, 03:48 PM	#13 (permalink)
SiRay6 Base Member Join Date: Nov 2011 Location: Diamond Bar, CA Posts: 63 Drives: 12 370z Gunmetal 6MT Rep Power: 13	stock water temp gauges are never accurate...moving up one or two dots could mean a bigger jump in temps...best to use aftermarket gauge and probe in my opinion. I'm curious if fixing the cooling/coolant issue will help lower the oil since stock is water cooled. Cooler the water, maybe it can cool the oil more effectively as well? Let us know what you're thinking for the oil cooler if/when you get one Martin. I'm very very interested in how you are going to bypass the stock setup, cap it off, or implement the stock in the setup. -Ray

12-19-2011, 04:51 PM	#14 (permalink)
Shamu A True Z Fanatic Join Date: Jan 2011 Location: Nor Cal Posts: 1,059 Drives: 370Z Racecar Rep Power: 19	Wow thats really hot given how cool it was. I dont get much over 235 degrees on days that are 75 to 85 degrees. What kind of lap times were you turning? Hard to believe stock pads and brake fluid were holding up, but maybe cool weather helped?