Which are the top oil coolers?

wh1te370z

I have Z1 25 row an I havnt seen any temps over 240. I've ran two 25 min sessions back to back this past weekend. I'd suggest goin w a 34 row if you can afford it so u never have to upgrade for anything you do to the car. For re most part. Unless u go absoultly crazy.

__________________
1998 BMW 328is... Track Build
2010 White 370z.... sold

Guard Dad

I'm not an expert on the oil coolers but my default oil temp while cruising at freeway speeds in 80 degree weather is 220 degrees, pretty much what it always seems to be. I think you'll find that without a cooler the oil temp will track the water temp until the engine is pushed then the oil temp will start to climb.

germanattitud

seems like ill be going with the z1 34 row oil cooler

__________________
370Z 40TH ANNIVERSARY - GT HAUS MEISTERSCHAFT CBE - STILLEN GEN 3 CAI - STILLEN HEADERS - STILLEN HFC'S - UPREV - CUSTOM HEADLIGHTS - 321 RWHP/251 RWTQ

daisuke149

get the thermostatic plate. Its not a super expensive piece but its nice to have so you dont over cool your oil just incase Florida ever sees a cold day.

germanattitud

yea good idea because in winter we do see mornings in low 30's

__________________
370Z 40TH ANNIVERSARY - GT HAUS MEISTERSCHAFT CBE - STILLEN GEN 3 CAI - STILLEN HEADERS - STILLEN HFC'S - UPREV - CUSTOM HEADLIGHTS - 321 RWHP/251 RWTQ

germanattitud

gtm's price includes the thermostatic plate and z1 its an additional charge for the plate................

__________________
370Z 40TH ANNIVERSARY - GT HAUS MEISTERSCHAFT CBE - STILLEN GEN 3 CAI - STILLEN HEADERS - STILLEN HFC'S - UPREV - CUSTOM HEADLIGHTS - 321 RWHP/251 RWTQ

nabenson

I have the Nissan Motorsports cooler (34 row?). I also live in Dallas, which has seen temperatures of 100+ for the last 34 days. So far, after 30 minutes on the freeway the temperature doesn't exceed about 180. In town (traffic, downtown) during the day I hit about 200 max.

Previously, when the car was new and did not have the cooler I could hit 200 without trying (my 6 mile morning commute could get me there). In case it matters I also have the Mocal thermostatic plate.

I have also tracked the car with/without. In april, at 85 degrees outside temperature I was able to get the car up to 260 during a 20 minute run at MSR Cresson (1.7). Hot enough that I had to stick to 4th for my last 2-3 laps because I didn't want to cook anything.

In June, at MSR Houston with temperatures of about 95 degrees I was unable to break about 240 during 30 minute sessions going as hard as I could.

Any of the coolers is worth it, but if you're in a place that's anything like Dallas with the summer heat I would get the biggest one possible. This engine gets too hot too fast. It's also nice knowing that when you're on the track you are able to keep the engine oil well within its temperature spec. New engines cost a lot more than the couple hundred dollars for the cooler!

germanattitud

I live in Florida so it gets nasty heat wise.

__________________
370Z 40TH ANNIVERSARY - GT HAUS MEISTERSCHAFT CBE - STILLEN GEN 3 CAI - STILLEN HEADERS - STILLEN HFC'S - UPREV - CUSTOM HEADLIGHTS - 321 RWHP/251 RWTQ

daisuke149

oh yeah, the rubber wrapping that z1 offers is nice too. Again its not exactly cheap but its not expensive but its a nice thing to have. Im never a fan when you have metal on metal when there is a slight chance of vibration or movement.

SPOHN

Yea defiantly pick up the sheath they sell. I just bought some to install on my next oil change. It's amazing the little areas that rubbing can occur. I don't think there rubber though. Dai just likes to wear rubbers is what he meant to say.

__________________

daisuke149

hah, jerk!

germanattitud

lol too funny

__________________
370Z 40TH ANNIVERSARY - GT HAUS MEISTERSCHAFT CBE - STILLEN GEN 3 CAI - STILLEN HEADERS - STILLEN HFC'S - UPREV - CUSTOM HEADLIGHTS - 321 RWHP/251 RWTQ