official 1/4 mile track times

VQStryker · 04-30-2012, 08:54 AM

Quote:

Originally Posted by chuckd05

The 350 guys 1/4 thread is impressive at this point. C'mon guy!!!! Get your boosted cars with some real rubber to the strip !!!

What's crazy is the 350s nitrous list. A ton of 11 second n20 cars. Vqs seem to like it.

workin on slicks boss

Mr.Squeeze · 05-02-2012, 12:40 AM

Quote:

Originally Posted by chuckd05

The 350 guys 1/4 thread is impressive at this point. C'mon guy!!!! Get your boosted cars with some real rubber to the strip !!!

What's crazy is the 350s nitrous list. A ton of 11 second n20 cars. Vqs seem to like it.

I agree with this

I will be adding my self to this list over the summer.

b1adesofcha0s · 04-30-2012, 09:17 AM

Nice time Chris

I wish the track here would open up so I can finally go drag racing again

tranceformer · 04-30-2012, 05:48 PM

It's already getting hot down here in south FL.

Z eliminator · 05-01-2012, 06:44 PM

Wating for my GtM built 7 AT.

b1adesofcha0s · 05-02-2012, 07:09 AM

Quote:

Originally Posted by Z eliminator

Wating for my GtM built 7 AT.

When are you getting your SC installed?

Z eliminator · 05-02-2012, 07:21 AM

The SC goes in right after i do the 1/4 mile with the GTM tranney and i have a new 3400 to 3500 stall Pro torque converter for the car.
Hopefully it will beat J nauts time for all motor N/A.
I will be looking at 12.1's to 12.20's
Sam called me lsat night. the VB parts are done and they are in the final stages of assebly and will be tested on his car. My tranny is finished and so his my heat treated flex plate. Still trying to get ARP bolts for the converter install.
it cost about 600.00 to install the converter withj fluid. so im going to wait for the tranney.

Z

b1adesofcha0s · 05-02-2012, 07:25 AM

Quote:

Originally Posted by Z eliminator

The SC goes in right after i do the 1/4 mile with the GTM tranney and i have a new 3400 to 3500 stall Pro torque converter for the car.
Hopefully it will beat J nauts time for all motor N/A.
I will be looking at 12.1's to 12.20's
Sam called me lsat night. the VB parts are done and they are in the final stages of assebly and will be tested on his car. My tranny is finished and so his my heat treated flex plate. Still trying to get ARP bolts for the converter install.
it cost about 600.00 to install the converter withj fluid. so im going to wait for the tranney.

Z

Cool, can't wait to see the results

I'm still trying to beat my stock time. I think I can get it done now with full bolt ons and a bit wider tires than before. The local dragstrip has been shut down most of the season because it was taken over by new management. It was pretty crappy before and supposedly the new owners want to actually make it nice. I hope so because then I can finally run some good times.

Edit: Looks like they are opening up this Friday night

Z eliminator · 05-02-2012, 07:28 AM

I missed the good weather lsat weekend. it was cold and sunny. 42 to 48 with a fully glued track and a 12 mile /hour tail wind.
does not get any better than that.

Z

VQStryker · 05-02-2012, 08:12 AM

Quote:

Originally Posted by Z eliminator

I missed the good weather lsat weekend. it was cold and sunny. 42 to 48 with a fully glued track and a 12 mile /hour tail wind.
does not get any better than that.

Z

b1adesofcha0s · 05-02-2012, 07:36 AM

It will probably be in the 60-70 range when I go.

andre12031948 · 05-24-2012, 06:25 PM

I used to check the drag racing section all the time. Since the #1 racer(Jason) stopped participating, the drags section became a complete bore.
When you have fully modded cars, 300+ whp, that can rev to 8k, & weigh only 3200lb. & people are having problems breaking 13 seconds. That is very sad. There should be guys breaking into the 11.9's........

Speedy · 05-24-2012, 09:08 PM

Quote:

Originally Posted by andre12031948

I used to check the drag racing section all the time. Since the #1 racer(Jason) stopped participating, the drags section became a complete bore.
When you have fully modded cars, 300+ whp, that can rev to 8k, & weigh only 3200lb. & people are having problems breaking 13 seconds. That is very sad. There should be guys breaking into the 11.9's........

Never gonna happen. It's physics.

Huck · 05-13-2012, 01:57 PM

Come middle of June I should have my FI LTH/CBE combo on with my pulleys installed, then I'll take her to the track and see what I can get

I'm looking forward to it!

Sent from my iPhizzle using magic and new fangled science stuff

b1adesofcha0s · 05-18-2012, 03:16 PM

Finally get to go to the drag strip today after like 7 months. Hoping to finally beat my stock time! Checking out the newly remodeled/resurfaced Capitol Raceway and hoping it's much better than before.

04-30-2012, 09:17 AM	#3 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 142	Nice time Chris I wish the track here would open up so I can finally go drag racing again __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

04-30-2012, 05:48 PM	#4 (permalink)
tranceformer A True Z Fanatic Join Date: Nov 2008 Location: Palm Beach, FL Posts: 1,213 Drives: 2009 370Z PW 6MT Rep Power: 268	It's already getting hot down here in south FL. __________________ Ray 2009 370Z Base Sport 6MT / 12.860 @ 109.09mph / 1.921 60ft / street tires official 1/4 mile track times

05-01-2012, 06:44 PM	#5 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,660 Drives: 370 Z 7AT Sports Rep Power: 20	Wating for my GtM built 7 AT. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

05-02-2012, 07:21 AM	#7 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,660 Drives: 370 Z 7AT Sports Rep Power: 20	The SC goes in right after i do the 1/4 mile with the GTM tranney and i have a new 3400 to 3500 stall Pro torque converter for the car. Hopefully it will beat J nauts time for all motor N/A. I will be looking at 12.1's to 12.20's Sam called me lsat night. the VB parts are done and they are in the final stages of assebly and will be tested on his car. My tranny is finished and so his my heat treated flex plate. Still trying to get ARP bolts for the converter install. it cost about 600.00 to install the converter withj fluid. so im going to wait for the tranney. Z __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

05-02-2012, 07:28 AM	#9 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,660 Drives: 370 Z 7AT Sports Rep Power: 20	I missed the good weather lsat weekend. it was cold and sunny. 42 to 48 with a fully glued track and a 12 mile /hour tail wind. does not get any better than that. Z __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

05-02-2012, 07:36 AM	#11 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 142	It will probably be in the 60-70 range when I go. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

05-24-2012, 06:25 PM	#12 (permalink)
andre12031948 Banned Join Date: Feb 2011 Location: monticello new york 127 Posts: 1,095 Drives: 08 350z black 6m/t Rep Power: 0	I don't get it I used to check the drag racing section all the time. Since the #1 racer(Jason) stopped participating, the drags section became a complete bore. When you have fully modded cars, 300+ whp, that can rev to 8k, & weigh only 3200lb. & people are having problems breaking 13 seconds. That is very sad. There should be guys breaking into the 11.9's........

05-13-2012, 01:57 PM	#14 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 34	Come middle of June I should have my FI LTH/CBE combo on with my pulleys installed, then I'll take her to the track and see what I can get I'm looking forward to it! Sent from my iPhizzle using magic and new fangled science stuff __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

05-18-2012, 03:16 PM	#15 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 142	Finally get to go to the drag strip today after like 7 months. Hoping to finally beat my stock time! Checking out the newly remodeled/resurfaced Capitol Raceway and hoping it's much better than before. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official 370Z 1/4 mile Times thread (Stock, TT, Nitrous, Supercharger, Bolt ons etc)	AK370Z	Track / Autocross / Drifting / Dragstrip	618	08-16-2019 12:56 PM
Official Nürburgring TOP 200 lap times	AK370Z	Track / Autocross / Drifting / Dragstrip	30	04-08-2016 02:12 AM
Comon guys i wanna see some 1/4 mile times with SC and TT kits installed	DON_Apollo	Forced Induction	74	04-24-2011 01:36 AM
My worst track times ever (dragstrip)	Mythic	Track / Autocross / Drifting / Dragstrip	10	09-16-2010 11:49 AM
Los Angeles tracks, track dates, times???	HerZ	Track / Autocross / Drifting / Dragstrip	3	12-31-2009 01:25 AM