|
Swirl Pot isn’t necessary, nor is an radiator upgrade. Simple duct is all you need with a 34 row oil Cooler. Im at 500whp give or take and don’t experience
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
07-30-2023, 12:14 AM
|
#1 (permalink) |
|
A True Z Fanatic
Join Date: Apr 2013
Location: st. petersburg
Posts: 5,730
Drives: 09 nissan 370z Sp M6
Rep Power: 295380   |
Swirl
Pot isn’t necessary, nor is an radiator upgrade. Simple duct is all you need with a 34 row oil Cooler. Im at 500whp give or take and don’t experience any overheating. |
|
|
|
12-26-2023, 10:41 AM
|
#2 (permalink) |
|
Base Member
Join Date: Mar 2013
Location: mn
Posts: 224
Drives: 09 black mt
Rep Power: 3369 |
I did this setup last summer on my 09. I only ran 2 events with it but I can say I noticed a difference. I was having troubles with getting bubbles in my system then overflowing and sitting in the reservoir. The ease of install and stop of this was worth the couple hundred bucks to me! I didn’t climb over stock temps because of it. The prior few I had to take cool downs frequently.
Currently I’m working on ducting - like mentioned above I don’t want to go aftermarket radiator. Last edited by weebs25; 12-26-2023 at 11:00 AM. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| high water temps at track (limp mode) | z510 | Track / Autocross / Drifting / Dragstrip | 5 | 06-04-2019 08:44 AM |
| Brake Temps at the track | DarkJak | Track / Autocross / Drifting / Dragstrip | 7 | 06-23-2018 11:58 PM |
| Keeping N/A | SoFloZ | Engine & Drivetrain | 9 | 04-18-2012 11:31 PM |
| Keeping a distance and still get cut off? | cjeezy | Nissan 370Z General Discussions | 47 | 04-15-2011 12:32 AM |
| Solved! Greddy Twin Turbo oil temps 220 on track | jayfightmoves | Forced Induction | 22 | 07-12-2010 11:22 PM |
19Likes
Hybrid Mode
