Autox Pad recommendation: Has anyone tried CarboTech AX6?

AK370Z · 03-23-2015, 11:11 PM

Quote:

Originally Posted by cossie1600

Xp8 gets you ice mode in bumpy service. If you want aggressive pads, the project my club racer seems to be working well. I also have something else in the bag that I don't have a chance to test

ohhhh what are you trying?

.. yeah.. I'm too nervous of grippy pad on Z. Especially two of my venue is old air strip. very gravely and bumpy.

Quote:

Originally Posted by Mick_12Nismo

AK, I run the same setup as Gomer for HPDE and LOVE the additional braking performance. I have not experienced any ice mode problems.

Nice. Great to know. However, I maybe be retiring Z for HPDE

. At 93K miles and 6 years later, I dunno if it can take track abuse. It's just dedicated Street autox car now.

Quote:

Originally Posted by cruzthepug

Did Evo School yesterday, first time out with the Hawk pads. Didn't get ice mode while on course but did get it a couple of times at the finish.

ohhh nice! phase 1 or 2? There's phase 2 that I WANT to do this year. HP+ you tried? after finish laser, it's understanable bc we usually do abs braking.

cruzthepug · 03-24-2015, 06:06 AM

Quote:

Originally Posted by AK370Z

ohhh nice! phase 1 or 2? There's phase 2 that I WANT to do this year. HP+ you tried? after finish laser, it's understanable bc we usually do abs braking.

Phase II and well worth it, do it!! Yes, HP+

cossie1600 · 03-27-2015, 05:32 PM

Quote:

Originally Posted by AK370Z

ohhhh what are you trying?

.. yeah.. I'm too nervous of grippy pad on Z. Especially two of my venue is old air strip. very gravely and bumpy.

Nice. Great to know. However, I maybe be retiring Z for HPDE

. At 93K miles and 6 years later, I dunno if it can take track abuse. It's just dedicated Street autox car now.

ohhh nice! phase 1 or 2? There's phase 2 that I WANT to do this year. HP+ you tried? after finish laser, it's understanable bc we usually do abs braking.

Cobalt Friction.

I just put in the Project Mu Club Racer. It doesn't bite as hard as the XP10, but it seems to hold up to track abuse as I got fade around the same time as I did with the 10. Since they only have one track day on it, I probably won't be using the new Cobalt Friction anytime soon. I bought them on a special. It was like $300 for the set

ufoz8mycow · 04-05-2015, 12:24 AM

How do you know you're in ice mode? What happens?

cruzthepug · 04-05-2015, 04:41 AM

Quote:

Originally Posted by cruzthepug

Did Evo School yesterday, first time out with the Hawk pads. Didn't get ice mode while on course but did get it a couple of times at the finish.

Sent from my iPad using Tapatalk

At yesterday's event we had a short finish and got ice mode almost every run. Still only getting it at the finish. After 2 points events with the Hawk pads I'm putting the OEM pads back on the front. I'm sure there is a learning curve with the new pads, but I'm struggling with scrubbing off too much speed and it's really costing me time. After my 4th place finish yesterday I'm going back to the OEM's up front for the SEDiv event next weekend.

cruzthepug · 04-05-2015, 04:46 AM

Quote:

Originally Posted by ufoz8mycow

How do you know you're in ice mode? What happens?

Ice mode happens when the car thinks that all 4 wheels are going to lock up. It goes to about 20% braking and you have to let off the brakes and re-apply to get out of it.

Read T · 04-05-2015, 08:48 PM

I've only been to 2 AX's in my Z (I live next to VIR so just save up for that). But both times I've run my "track" PFC 08s all around. They seem to do great at AX, although I'll admit I'm probably not a good enough driver to really push their limits. Since they are an endurance racing pad I'm not sure if they get enough heat in them in short runs.

cruzthepug · 04-09-2015, 06:12 AM

Quote:

Originally Posted by cruzthepug

At yesterday's event we had a short finish and got ice mode almost every run. Still only getting it at the finish. After 2 points events with the Hawk pads I'm putting the OEM pads back on the front. I'm sure there is a learning curve with the new pads, but I'm struggling with scrubbing off too much speed and it's really costing me time. After my 4th place finish yesterday I'm going back to the OEM's up front for the SEDiv event next weekend.

Went back and looked at the videos and I was wrong about ice mode. I did get it a couple of time on course, each time taking out a cone. What I was thinking was driving too hard into a feature and a bad push was really ice mode.

It was killing me that in the T&T's a month ago I was turning some really fast times and then in the first 2 points event I struggled to 4th place finishes. I guess I'll find out if my theory is correct this weekend at SEDiv in Kodak, TN.

BryanH · 04-14-2015, 12:24 AM

Interesting to hear that more aggressive pads are liked on the 370Z for autox. One of my theories (completely from the left-field region of my strange mind) is that aggressive pads might not always play nicely with street ABS systems. Stopping distances may increase, and/or ice mode may become more common. In my experience, stock RX-8 brake pads work better than one aftermarket pad tried (I wish I remembered which one) in the autocross setting. Also, both of my 300ZX NAs on stock pads stopped in shorter distances than my 350Z does on StopTech pads -- and the Z32s were on narrower tires.

It's something I'd really like to learn more about, but I don't know where to find authoritative information on the subject.

04-05-2015, 08:48 PM	#22 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 17	I've only been to 2 AX's in my Z (I live next to VIR so just save up for that). But both times I've run my "track" PFC 08s all around. They seem to do great at AX, although I'll admit I'm probably not a good enough driver to really push their limits. Since they are an endurance racing pad I'm not sure if they get enough heat in them in short runs. __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Autox tire recommendation: Hancook RS3 V2 vs. Direzza Z2 star spec	AK370Z	Track / Autocross / Drifting / Dragstrip	22	03-24-2015 12:23 PM
[FOR SALE] Carbotech XP8	Eon777	Parts for sale (Private Classifieds)	3	04-06-2014 09:52 PM
[WTB] Carbotech XP8's	edconline	Parts for sale (Private Classifieds)	3	03-10-2014 04:06 PM
[FOR SALE] Used Carbotech XP10's	import111	Parts for sale (Private Classifieds)	7	12-31-2011 06:50 PM
FS: Brake Pads (Track/AutoX) Carbotech & Hawk	M.Bonanni	Parts for sale (Private Classifieds)	8	07-23-2010 03:55 PM

04-05-2015, 12:24 AM	#19 (permalink)
ufoz8mycow Track Member Join Date: Mar 2012 Location: Vegas Posts: 536 Drives: Black Cherry '12 Z Rep Power: 16	How do you know you're in ice mode? What happens?

04-14-2015, 12:24 AM	#24 (permalink)
BryanH Base Member Join Date: Jun 2012 Location: California Posts: 5 Drives: NISMO 370Z RC Rep Power: 12	Interesting to hear that more aggressive pads are liked on the 370Z for autox. One of my theories (completely from the left-field region of my strange mind) is that aggressive pads might not always play nicely with street ABS systems. Stopping distances may increase, and/or ice mode may become more common. In my experience, stock RX-8 brake pads work better than one aftermarket pad tried (I wish I remembered which one) in the autocross setting. Also, both of my 300ZX NAs on stock pads stopped in shorter distances than my 350Z does on StopTech pads -- and the Z32s were on narrower tires. It's something I'd really like to learn more about, but I don't know where to find authoritative information on the subject.