Exhaust Shop

tbonesteak · 05-22-2010, 12:00 AM

Just installed Nismo catback and the tips are not aligning. I do not have a lift and most of my friends cannot fit under jackstands. I've spent the entire day loosening up and retightening everything, but with limited tools and help I couldn't get very far. Can anyone recommend a legit exhaust shop who can help me? It should take no more than 10 minutes for them to get it right. Thanks guys.

TIm

Mr Chaz Tsai · 05-22-2010, 04:33 PM

I just had my Tanabe exhaust cut and realigned at Bro Muffler down in Huntington Beach. They did my friend's 997 GT3 center exhaust conversion as well. Call them and ask for Steve.

17242 Gothard Street
Huntington Beach, CA 92647-5400
(714) 841-5444

tbonesteak · 05-23-2010, 08:39 AM

Thanks Chaz i'll give them a call.

tbonesteak · 05-25-2010, 01:09 PM

Had the work done yesterday. Steve is mad chill. He let me chill under the car as he was working and made sure i was happy with everything he was doin. Thanks Chaz.

Mr Chaz Tsai · 05-25-2010, 01:39 PM

glad to hear

tbonesteak · 05-25-2010, 07:01 PM

Steve was like Chaz's car's too low it's so hard to work on it!!! hahahahahah

Mr Chaz Tsai · 05-25-2010, 11:04 PM

LOL yea the job took him nearly four hours to do to redo some of the piping and stuff. he had to essentially take off the exhaust and work on it off the car hahahah

tbonesteak · 05-26-2010, 05:06 PM

HAHA that's exactly what he said. I wanna check out your setup. Let me know if you're going to any meets and I'll make sure to roll by and say wsup!

mwz516 · 06-17-2011, 06:08 PM

what about the cost for installation?

05-22-2010, 12:00 AM	#1 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 375	Exhaust Shop Just installed Nismo catback and the tips are not aligning. I do not have a lift and most of my friends cannot fit under jackstands. I've spent the entire day loosening up and retightening everything, but with limited tools and help I couldn't get very far. Can anyone recommend a legit exhaust shop who can help me? It should take no more than 10 minutes for them to get it right. Thanks guys. TIm

05-22-2010, 04:33 PM	#2 (permalink)
Mr Chaz Tsai Base Member Join Date: Apr 2009 Location: Los Angeles, CA Posts: 120 Drives: 2012 GT-R Rep Power: 16	I just had my Tanabe exhaust cut and realigned at Bro Muffler down in Huntington Beach. They did my friend's 997 GT3 center exhaust conversion as well. Call them and ask for Steve. 17242 Gothard Street Huntington Beach, CA 92647-5400 (714) 841-5444 __________________ Mr Chaz Tsai 2012 GTR SPE650-E85 - 576HP 550TQ // Tuned by SP Engineering (road course tune)

05-25-2010, 01:39 PM	#5 (permalink)
Mr Chaz Tsai Base Member Join Date: Apr 2009 Location: Los Angeles, CA Posts: 120 Drives: 2012 GT-R Rep Power: 16	glad to hear __________________ Mr Chaz Tsai 2012 GTR SPE650-E85 - 576HP 550TQ // Tuned by SP Engineering (road course tune)

05-25-2010, 11:04 PM	#7 (permalink)
Mr Chaz Tsai Base Member Join Date: Apr 2009 Location: Los Angeles, CA Posts: 120 Drives: 2012 GT-R Rep Power: 16	LOL yea the job took him nearly four hours to do to redo some of the piping and stuff. he had to essentially take off the exhaust and work on it off the car hahahah __________________ Mr Chaz Tsai 2012 GTR SPE650-E85 - 576HP 550TQ // Tuned by SP Engineering (road course tune)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Boombop Shop: 370Z 2.5" X Pipe Catback Exhaust (Made in USA w/RathGibson Tubing!)	Ben@Boombop	Intake/Exhaust	26	12-01-2010 04:40 PM
Good shop for Exhaust install in Houston?	tsolin01	Texas	1	03-26-2010 07:55 PM
so I went to a custom exhaust shop	jason805	Intake/Exhaust	5	11-10-2009 02:24 PM
Boombop Shop Custom Exhaust	SoCal 370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	48	07-03-2009 03:08 PM
X-pipe exhaust system....take a look, boombop shop exhaust	genki370z	Intake/Exhaust	2	07-03-2009 02:27 AM

05-23-2010, 08:39 AM	#3 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 375	Thanks Chaz i'll give them a call.

05-25-2010, 01:09 PM	#4 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 375	Had the work done yesterday. Steve is mad chill. He let me chill under the car as he was working and made sure i was happy with everything he was doin. Thanks Chaz.

05-25-2010, 07:01 PM	#6 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 375	Steve was like Chaz's car's too low it's so hard to work on it!!! hahahahahah

05-26-2010, 05:06 PM	#8 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 375	HAHA that's exactly what he said. I wanna check out your setup. Let me know if you're going to any meets and I'll make sure to roll by and say wsup!

06-17-2011, 06:08 PM	#9 (permalink)
mwz516 Base Member Join Date: Jun 2011 Location: Los Angeles Posts: 59 Drives: 370Z Touring CY MT Rep Power: 13	what about the cost for installation?