Ark grip for sale

tsummitt · 11-28-2014, 04:39 PM

I have an Ark Grip CBE for sale in San Antonio for local pick up only. The exhaust only has about 2500 miles on it but you will need to pick up a couple of gaskets and exhaust bolts because I used them on a different project. The exhaust is in beautiful condition, I don't think there are any scratches anywhere on the entire system. I am selling because with the Berk HFC's, it's just too loud for me. I just took it off today and other than needing to be cleaned, this is a sweet looking set up. $650.00 local pick up only. Tom

kynseon · 11-28-2014, 04:48 PM

Not even a chance for shipping?

jiu_jitz · 11-28-2014, 05:16 PM

how much extra would the gaskets and bolts be?

tsummitt · 11-28-2014, 05:35 PM

Gaskets and bolts... I'm not sure but less than $20 Such a pain to do but if no one in SA picks it up, I guess I could ship - I still have the original box. I want to see how this plays out first.

jiu_jitz · 11-28-2014, 05:57 PM

id be interested in meeting halfway depending on the bolts/gaskets price.
Should i contact ark regarding this? It seems basic gaskets from the hardware store wouldn't work on some parts of the exhaust.

tsummitt · 11-28-2014, 06:06 PM

I could go to Austin I guess. Perhaps Ark would sell an install kit but looks like normal gaskets to me and the bolts are standard with lock washers.

jiu_jitz · 11-28-2014, 07:34 PM

OK I will try to call them tomorrow to get a price...if they aren't open first thing Monday morning. I'll keep ya posted because I'll actually be in Austin next weekend.

eastwest2300 · 11-28-2014, 08:12 PM

$30 for gaskets (I'm not kidding, I called several months back)

sledchopper72 · 11-28-2014, 08:18 PM

Would u come to houston?

Zoren 370 · 11-28-2014, 08:25 PM

Dang dirt cheap for a great exhaust!

Grab this like its your last breath! Lol

Zoren 370 · 11-28-2014, 08:26 PM

Buy the one of Z1 3 hole gasket. Works best.

3.7 ZPA · 11-29-2014, 07:24 PM

Quote:

Originally Posted by Zoren 370

Buy the one of Z1 3 hole gasket. Works best.

Aren't the three-hole gaskets for mating the cats to the manifolds? The rest of the exhaust is two-hole. I bought a Tanabe cat-back used, and had to buy all new hardware. The gaskets were $15 each, and I bought extra nuts and bots for about $30.

I bought the gaskets directly from Tanabe, but you can probably get them from anywhere. Just make sure you get the 70mm.

Zoren 370 · 11-29-2014, 10:58 PM

^ ah yes sir, you are right!
My bad but that gasket been on my Z for 3 years now no problems.
The 2 hole gaskets I have already replaced 3x
The one I got from Z1 are a little bigger but worked fine.

image.jpg

tsummitt · 11-28-2014, 08:27 PM

Nah, no Houston for me... Sorry

CoolKid092 · 11-28-2014, 10:35 PM

Im local!!

11-28-2014, 05:35 PM	#4 (permalink)
tsummitt Base Member Join Date: Sep 2010 Location: San Antonio Posts: 57 Drives: 2010 370Z 40th Rep Power: 15	Gaskets and bolts... I'm not sure but less than $20 Such a pain to do but if no one in SA picks it up, I guess I could ship - I still have the original box. I want to see how this plays out first. kynseon likes this.

11-28-2014, 08:12 PM	#8 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 91,031 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684552	$30 for gaskets (I'm not kidding, I called several months back) __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ark Grip Version 2-On Sale this Month!!!	FBNISSAN	Exhaust/Intake	271	12-01-2015 12:16 PM
Ark Grip Exhaust potentially for sale	Akmcmahon	Intake/Exhaust	4	10-18-2014 01:44 PM
Ark Grip and DT-S Exhaust On Sale!!!	CPERFORMANCE	Exhaust/Intake	58	04-01-2014 01:46 PM
So I decided to pull the trigger on the ARK GRiP the last day of the tax sale...	Vicster	Intake/Exhaust	1	04-27-2013 02:58 PM
NJ: ARK GRIP Exhaust for sale - cheap	BLM	North East Region	2	03-30-2011 09:18 AM

11-28-2014, 04:48 PM	#2 (permalink)
kynseon Base Member Join Date: Oct 2014 Location: Florida Posts: 183 Drives: 14 370z M6 Rep Power: 11	Not even a chance for shipping?

11-28-2014, 05:16 PM	#3 (permalink)
jiu_jitz Base Member Join Date: Aug 2014 Location: DFdub Posts: 79 Drives: 14mag-blk 6mt Rep Power: 11	how much extra would the gaskets and bolts be?

11-28-2014, 05:57 PM	#5 (permalink)
jiu_jitz Base Member Join Date: Aug 2014 Location: DFdub Posts: 79 Drives: 14mag-blk 6mt Rep Power: 11	id be interested in meeting halfway depending on the bolts/gaskets price. Should i contact ark regarding this? It seems basic gaskets from the hardware store wouldn't work on some parts of the exhaust.

11-28-2014, 06:06 PM	#6 (permalink)
tsummitt Base Member Join Date: Sep 2010 Location: San Antonio Posts: 57 Drives: 2010 370Z 40th Rep Power: 15	I could go to Austin I guess. Perhaps Ark would sell an install kit but looks like normal gaskets to me and the bolts are standard with lock washers.

11-28-2014, 07:34 PM	#7 (permalink)
jiu_jitz Base Member Join Date: Aug 2014 Location: DFdub Posts: 79 Drives: 14mag-blk 6mt Rep Power: 11	OK I will try to call them tomorrow to get a price...if they aren't open first thing Monday morning. I'll keep ya posted because I'll actually be in Austin next weekend.

11-28-2014, 08:18 PM	#9 (permalink)
sledchopper72 Base Member Join Date: Aug 2013 Location: richmond, tx Posts: 190 Drives: a big brown truck Rep Power: 12	Would u come to houston?

11-28-2014, 08:25 PM	#10 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913654	Dang dirt cheap for a great exhaust! Grab this like its your last breath! Lol

11-28-2014, 08:26 PM	#11 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913654	Buy the one of Z1 3 hole gasket. Works best.

11-29-2014, 10:58 PM	#13 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913654	^ ah yes sir, you are right! My bad but that gasket been on my Z for 3 years now no problems. The 2 hole gaskets I have already replaced 3x The one I got from Z1 are a little bigger but worked fine. image.jpg

11-28-2014, 08:27 PM	#14 (permalink)
tsummitt Base Member Join Date: Sep 2010 Location: San Antonio Posts: 57 Drives: 2010 370Z 40th Rep Power: 15	Nah, no Houston for me... Sorry

11-28-2014, 10:35 PM	#15 (permalink)
CoolKid092 Base Member Join Date: Feb 2011 Location: San Antonio, TX Posts: 96 Drives: 2009-370z-Chicane Rep Power: 15	Im local!!