WTB: 20mm spacers

wdkwang · 02-20-2011, 10:07 PM

I'm looking for 20mm spacers.
Preferably direct bolt-on type, such as the Ichiba V2 design.

toxik · 02-20-2011, 10:09 PM

FYI, you will need a 25mm+ spacer on the front with stock wheels, if you are not replacing studs.

rshen1030 · 02-20-2011, 10:10 PM

i have a set for sale 50 each, used only 200 miles, lmk

wdkwang · 02-20-2011, 10:41 PM

Quote:

Originally Posted by toxik

FYI, you will need a 25mm+ spacer on the front with stock wheels, if you are not replacing studs.

I'm sort of new with this stuff. I am looking for spacers for the stock Rays front wheels. Why do I need 25mm?

toxik · 02-21-2011, 12:42 AM

Quote:

Originally Posted by wdkwang

I'm sort of new with this stuff. I am looking for spacers for the stock Rays front wheels. Why do I need 25mm?

The reason most people have stud replacement spacers on OEM wheels and not bolt on is because bolt-on spacers still have the OEM studs sticking out past the spacer, only a 25mm spacer covers up enough of the OEM studs for them not to hit the wall of the rim's hub. There's been a few threads about it, you can search if you want additional information.

COLDSHOT · 02-21-2011, 01:05 AM

no 20mm will be just fine

wdkwang · 02-21-2011, 02:24 AM

Quote:

Originally Posted by toxik

The reason most people have stud replacement spacers on OEM wheels and not bolt on is because bolt-on spacers still have the OEM studs sticking out past the spacer, only a 25mm spacer covers up enough of the OEM studs for them not to hit the wall of the rim's hub. There's been a few threads about it, you can search if you want additional information.

ok, i understand what you're saying now. i was thinking about how the studs look from the ichiba v2 25mm spacers i have on the rears, and the oem studs were a bit recessed on those so i imagine getting the same brand but in 20mm should be okay.

i just found out you need a camber kit when you lower your car. another expense on top. lol sigh. all this just to get the wheels looking flush and done right.

wdkwang · 02-21-2011, 02:25 AM

it makes me wonder now if the rear spacers increased the camber cause i seriously did not notice it before the install

simota1 · 02-21-2011, 04:51 AM

i thought it was 15mm that had to replace the studs and then 20mm would be fine on the rays?

toxik · 02-21-2011, 07:55 AM

Quote:

Originally Posted by simota1

i thought it was 15mm that had to replace the studs and then 20mm would be fine on the rays?

Just checked the stillen site as I remember they were getting a lot of heat from members here:

STILLEN : H&R TRAK+ Wheel Spacers

wdkwang · 03-19-2011, 03:33 AM

bump buh de bum bump

02-20-2011, 10:07 PM	#1 (permalink)
wdkwang Track Member Join Date: Nov 2010 Location: N/A Posts: 899 Drives: slidewayz Rep Power: 20	WTB: 20mm spacers I'm looking for 20mm spacers. Preferably direct bolt-on type, such as the Ichiba V2 design. __________________ Powerhouse Amuse \| K&N Typhoon Intakes \| MotorDyne ART Pipes \| Borla Catback Exhaust \| B&M Short Shifter \| Intake Ducts \| Ichiba 25mm F/R Spacers \| Carbon Fiber Interior Vinyl Wrap \| Tints \| 10000k HIDs \| Vtak, yo!

02-21-2011, 02:25 AM	#8 (permalink)
wdkwang Track Member Join Date: Nov 2010 Location: N/A Posts: 899 Drives: slidewayz Rep Power: 20	it makes me wonder now if the rear spacers increased the camber cause i seriously did not notice it before the install __________________ Powerhouse Amuse \| K&N Typhoon Intakes \| MotorDyne ART Pipes \| Borla Catback Exhaust \| B&M Short Shifter \| Intake Ducts \| Ichiba 25mm F/R Spacers \| Carbon Fiber Interior Vinyl Wrap \| Tints \| 10000k HIDs \| Vtak, yo!

02-21-2011, 04:51 AM	#9 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	i thought it was 15mm that had to replace the studs and then 20mm would be fine on the rays? __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

03-19-2011, 03:33 AM	#11 (permalink)
wdkwang Track Member Join Date: Nov 2010 Location: N/A Posts: 899 Drives: slidewayz Rep Power: 20	bump buh de bum bump __________________ Powerhouse Amuse \| K&N Typhoon Intakes \| MotorDyne ART Pipes \| Borla Catback Exhaust \| B&M Short Shifter \| Intake Ducts \| Ichiba 25mm F/R Spacers \| Carbon Fiber Interior Vinyl Wrap \| Tints \| 10000k HIDs \| Vtak, yo!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
H&R 15mm-20mm DSR spacers F/S	Baer383	Parts for sale (Private Classifieds)	19	12-23-2010 07:16 PM
Fs: H&r 20mm rear spacers / 15mm front spacers	xbigb4ller69z	Parts for sale (Private Classifieds)	25	12-10-2010 12:20 PM
20mm wheel spacers	kevin8086	Wanted	0	11-26-2010 01:21 PM
WTT: 20mm Spacers!	Spec Jay	North West Region	1	10-24-2010 06:20 PM
H&R 20mm rear spacers	tommyguns	Wheels & Tires	6	04-10-2010 04:48 PM

02-20-2011, 10:10 PM	#3 (permalink)
rshen1030 Base Member Join Date: Aug 2009 Location: Stockton Posts: 89 Drives: 09'370Z PW M6 Rep Power: 15	i have a set for sale 50 each, used only 200 miles, lmk

02-21-2011, 01:05 AM	#6 (permalink)
COLDSHOT Base Member Join Date: Feb 2011 Location: vancouver Posts: 80 Drives: 2010 40th Rep Power: 14	no 20mm will be just fine