$2750 Iforged wheels for sale, 20’s with perfect tires.

jojogts · 11-06-2017, 03:24 PM

Hello guys, traded the Nismo Z off for a GTR and was hoping these wheels would fit. To bad for me as they do not, so I’m putting them up for sale. These wheels and tires have a MSRP of over $5500, I will let them go for $2750 shipped...
Wheels do come with hub spacers of 10mm to clear front brake. Tires are Nitto nt555 gen 2’s in very good condition, maybe 5k miles. Wheels are satin centers with gloss black lips, there are 1 or 2 rock chips (no Rash)! Wheels look awesome on the car! True 3 piece wheels... have any questions please PM me or you can text or call me at 304-634-19 twenty two...

Not_Z_but_G · 11-06-2017, 06:47 PM

19x?
Offsett?
Width?
Tire sizes?
Tires included?

cooltoy · 11-06-2017, 07:10 PM

Quote:

Originally Posted by Not_Z_but_G

19x?

Title says 20"

Quote:

Originally Posted by Not_Z_but_G

Offsett?
Width?

20x10 +28 front
20x12 +31 rear

Quote:

Originally Posted by Not_Z_but_G

Tire sizes?

275/40/20
305/35/20

Quote:

Originally Posted by Not_Z_but_G

Tires included?

Yes.

At least this is my educated guess.

jojogts · 11-06-2017, 07:33 PM

Yes, yes and yes lol! Well to be honest I do not know the exact offset. I can tell you with a 10 mm spacer on the front the wheels fit perfectly. Flush with wheel wells, no need to run any wild camber to clear any rubbing. Tires do come with the wheels, that’s why I think this is a good deal! I will also ship them with this price which will be very expensive Because they are mounted and balanced. I would bet it will cost me $250! I can also meet within a reasonable distance of Huntington WV.

cooltoy · 11-06-2017, 07:46 PM

Did you have them powder coated to black? Didn’t they used to be red?

jojogts · 11-10-2017, 04:16 AM

Yea I had them redone in black...

cooltoy · 11-10-2017, 07:10 AM

In that case the numbers I posted are correct.

jojogts · 11-10-2017, 11:11 AM

Fronts are now 10 wide as I replaced the 2 front lips with brand new ones because when I bought them the wheels stuck out of the fenders just a little bit and I did not want to run a lot of negative camber to make it fit.

jojogts · 11-10-2017, 11:12 AM

Fits perfect now, and looks flush...

jojogts · 11-17-2017, 07:03 PM

Bump

jojogts · 01-19-2018, 07:09 PM

Guys this is what your going to pay for most entry level cast wheels and tires, do your research 3 piece wheels are very expensive and in my opinion the best looking wheels you can buy.

bikeking · 01-19-2018, 08:57 PM

I have iforged wheels, I'll agree, they weren't cheap!

Sent from my iPhone using Tapatalk

jojogts · 01-22-2018, 02:20 PM

Let’s get these sold...

jojogts · 01-28-2018, 07:13 PM

Bump

jojogts · 10-26-2018, 09:12 PM

Price drop $2500

11-06-2017, 06:47 PM	#2 (permalink)
Not_Z_but_G Enthusiast Member Join Date: Apr 2016 Location: Tacoma , WA Posts: 257 Drives: 08 g35s 6mt Rep Power: 8	19x? Offsett? Width? Tire sizes? Tires included? Electrify904 likes this. __________________ 2 door s200

11-06-2017, 07:46 PM	#5 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,935 Drives: 14 PW 370Z S/T MT Rep Power: 240204	Did you have them powder coated to black? Didn’t they used to be red? __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

11-10-2017, 07:10 AM	#7 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,935 Drives: 14 PW 370Z S/T MT Rep Power: 240204	In that case the numbers I posted are correct. JARblue and cv129 like this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] 20" iForged Daytona wheels with tires	Spradau51	Parts for sale (Private Classifieds)	1	09-10-2016 06:10 AM
[FOR SALE] Custom Step Lip 20" Iforged Seneka Wheels & Nitto NT05 tires for sale	jay666	Parts for sale (Private Classifieds)	14	03-09-2015 08:15 AM
2011 Nismo Wheels/tires/TPMS (factory) - $2750	GMikk	Parts for sale (Private Classifieds)	0	07-28-2013 04:52 PM
[FOR SALE] iForged Swift Wheels and Tires 19x10+12 19x12+12	z34ftw	Parts for sale (Private Classifieds)	6	05-12-2013 04:27 AM
FS: 19" sport wheels and tires for sale - perfect condition	Smallywood	Parts for sale (Private Classifieds)	3	10-13-2009 08:18 PM

11-06-2017, 07:33 PM	#4 (permalink)
jojogts Base Member Join Date: Jan 2015 Location: WV Posts: 69 Drives: 2008 Ford F-250 Rep Power: 10	Yes, yes and yes lol! Well to be honest I do not know the exact offset. I can tell you with a 10 mm spacer on the front the wheels fit perfectly. Flush with wheel wells, no need to run any wild camber to clear any rubbing. Tires do come with the wheels, that’s why I think this is a good deal! I will also ship them with this price which will be very expensive Because they are mounted and balanced. I would bet it will cost me $250! I can also meet within a reasonable distance of Huntington WV.

11-10-2017, 04:16 AM	#6 (permalink)
jojogts Base Member Join Date: Jan 2015 Location: WV Posts: 69 Drives: 2008 Ford F-250 Rep Power: 10	Yea I had them redone in black...

11-10-2017, 11:11 AM	#8 (permalink)
jojogts Base Member Join Date: Jan 2015 Location: WV Posts: 69 Drives: 2008 Ford F-250 Rep Power: 10	Fronts are now 10 wide as I replaced the 2 front lips with brand new ones because when I bought them the wheels stuck out of the fenders just a little bit and I did not want to run a lot of negative camber to make it fit.

11-10-2017, 11:12 AM	#9 (permalink)
jojogts Base Member Join Date: Jan 2015 Location: WV Posts: 69 Drives: 2008 Ford F-250 Rep Power: 10	Fits perfect now, and looks flush...

11-17-2017, 07:03 PM	#10 (permalink)
jojogts Base Member Join Date: Jan 2015 Location: WV Posts: 69 Drives: 2008 Ford F-250 Rep Power: 10	Bump

01-19-2018, 07:09 PM	#11 (permalink)
jojogts Base Member Join Date: Jan 2015 Location: WV Posts: 69 Drives: 2008 Ford F-250 Rep Power: 10	Guys this is what your going to pay for most entry level cast wheels and tires, do your research 3 piece wheels are very expensive and in my opinion the best looking wheels you can buy.

01-19-2018, 08:57 PM	#12 (permalink)
bikeking Base Member Join Date: Oct 2012 Location: alberta Posts: 35 Drives: 09 nissan 370z bl m6 Rep Power: 12	I have iforged wheels, I'll agree, they weren't cheap! Sent from my iPhone using Tapatalk

01-22-2018, 02:20 PM	#13 (permalink)
jojogts Base Member Join Date: Jan 2015 Location: WV Posts: 69 Drives: 2008 Ford F-250 Rep Power: 10	Let’s get these sold...

01-28-2018, 07:13 PM	#14 (permalink)
jojogts Base Member Join Date: Jan 2015 Location: WV Posts: 69 Drives: 2008 Ford F-250 Rep Power: 10	Bump

10-26-2018, 09:12 PM	#15 (permalink)
jojogts Base Member Join Date: Jan 2015 Location: WV Posts: 69 Drives: 2008 Ford F-250 Rep Power: 10	Price drop $2500