Fast intentions exhaust

cooltoy · 02-03-2015, 02:19 PM

Quote:

Originally Posted by Zbrah

Oh it was posted a while back, i can dig up those posts when i have time.

Never seen that. Was it FI that was claiming this, or a member?

Zbrah · 02-03-2015, 02:41 PM

I believe was another member. One of my buddy was looking to order an FI, clearance was a big issue for him so he asked that question and was told FI sits higher than stock. He ordered it, even paid extra for the CF cans, it scraped soon after it was installed

dichoi · 02-03-2015, 02:47 PM

This exhaust will not scrape at stock height. Even if lowered, it will only scrape on massive dips. Pretty much only when you bottom out...

Zbrah · 02-03-2015, 03:00 PM

Quote:

Originally Posted by dichoi

This exhaust will not scrape at stock height. Even if lowered, it will only scrape on massive dips. Pretty much only when you bottom out...

Oh my comment wasn't meant to say that FI hangs low at all, in fact it's probably a little higher than the Ark Grip I had on, now those things are low

cooltoy · 02-03-2015, 03:11 PM

Quote:

Originally Posted by Zbrah

I believe was another member. One of my buddy was looking to order an FI, clearance was a big issue for him so he asked that question and was told FI sits higher than stock. He ordered it, even paid extra for the CF cans, it scraped soon after it was installed

When I was buying mine, FI said that it is the same height as the lowest point on the car, but it is shifted now to an area which may not be as protected as the other OEM low point (on the rear suspension I believe). I have not scraped at stock height and I only clear my drive way by a few millimetres on the front.

Zbrah · 02-03-2015, 04:25 PM

I've seen ppl using zip ties around the rubber hangers to gain a few mm of clearance.

Dawson · 02-04-2015, 09:27 AM

Will this fit a g37 coupe?

cooltoy · 02-04-2015, 09:35 AM

I would recommend asking Fast Intensions.

dichoi · 02-04-2015, 11:18 AM

Quote:

Originally Posted by Dawson

Will this fit a g37 coupe?

Im not too sure actually... Like cooltoy said, I'd ask Tony @ fi

Digitized · 02-04-2015, 06:13 PM

How much to ship it to 93422?

DEpointfive0 · 02-04-2015, 06:32 PM

Quote:

Originally Posted by Dawson

Will this fit a g37 coupe?

No, the G37 is longer

g37hr · 02-04-2015, 06:33 PM

It will fit just need to get extensions and extend tail pipes as well. I used a magnaflow cbe from a 370z on my g37 coupe. Just paid muffler shop to fabricate 2.5" tubes only about $80 more

240se · 02-04-2015, 07:35 PM

I am at stock ride height and have the gen 2 and when I put it on I was concerned about clearance. I measured and the lowest point under my Z (except the stock front air dam) is the cats and they are around 1/4" lower than the lowest point on my mufflers.

Dawson · 02-05-2015, 09:41 AM

Kevin @ FI said it won't unfortunately

dichoi · 02-05-2015, 12:53 PM

All pm's replied to.

02-03-2015, 02:41 PM	#17 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5451	I believe was another member. One of my buddy was looking to order an FI, clearance was a big issue for him so he asked that question and was told FI sits higher than stock. He ordered it, even paid extra for the CF cans, it scraped soon after it was installed __________________

02-03-2015, 02:47 PM	#18 (permalink)
dichoi Enthusiast Member Join Date: Jul 2011 Location: San Diego Posts: 263 Drives: 2010 370z Rep Power: 13	This exhaust will not scrape at stock height. Even if lowered, it will only scrape on massive dips. Pretty much only when you bottom out... Zbrah likes this.

02-03-2015, 04:25 PM	#21 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5451	I've seen ppl using zip ties around the rubber hangers to gain a few mm of clearance. __________________

02-04-2015, 09:35 AM	#23 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,942 Drives: 14 PW 370Z S/T MT Rep Power: 240365	I would recommend asking Fast Intensions. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

02-04-2015, 06:33 PM	#27 (permalink)
g37hr Base Member Join Date: Jan 2015 Location: tx Posts: 133 Drives: g37 coupe 08 350z Rep Power: 10	It will fit just need to get extensions and extend tail pipes as well. I used a magnaflow cbe from a 370z on my g37 coupe. Just paid muffler shop to fabricate 2.5" tubes only about $80 more DEpointfive0 likes this.

02-04-2015, 09:27 AM	#22 (permalink)
Dawson Base Member Join Date: Oct 2014 Location: North Dakota Posts: 3 Drives: 09 nissan 370z PW M6 Rep Power: 10	Will this fit a g37 coupe?

02-04-2015, 06:13 PM	#25 (permalink)
Digitized Base Member Join Date: Nov 2014 Location: Atascadero, CA Posts: 16 Drives: 2012 BMW 335i Rep Power: 10	How much to ship it to 93422?

02-04-2015, 07:35 PM	#28 (permalink)
240se Enthusiast Member Join Date: Nov 2013 Location: VA Posts: 259 Drives: Gunmetal 12' Rep Power: 11	I am at stock ride height and have the gen 2 and when I put it on I was concerned about clearance. I measured and the lowest point under my Z (except the stock front air dam) is the cats and they are around 1/4" lower than the lowest point on my mufflers. cooltoy likes this.

02-05-2015, 09:41 AM	#29 (permalink)
Dawson Base Member Join Date: Oct 2014 Location: North Dakota Posts: 3 Drives: 09 nissan 370z PW M6 Rep Power: 10	Kevin @ FI said it won't unfortunately

02-05-2015, 12:53 PM	#30 (permalink)
dichoi Enthusiast Member Join Date: Jul 2011 Location: San Diego Posts: 263 Drives: 2010 370z Rep Power: 13	All pm's replied to.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP! Fast Intentions Exhaust	osbornsm	Intake/Exhaust	1	06-03-2014 10:32 AM
[FOR SALE] Gtm 1.5 sc / fast intentions 18'' res exhaust... +more	jezeka777	Parts for sale (Private Classifieds)	43	11-04-2013 02:17 PM
Polyurethane exhaust hangers with fast intentions exhaust?	JAYNO20	Intake/Exhaust	2	03-14-2013 07:58 PM
Fast Intentions Exhaust	Mark Gomez	Intake/Exhaust	13	05-19-2011 07:51 PM
ARK Exhaust vs. Fast Intentions	dnasty370z	Intake/Exhaust	61	09-06-2010 06:25 PM