Carbon Fiber Driveshaft

jwick · 04-22-2014, 07:46 PM

How much is this driveshaft your looking at anyway?

hc_416 · 04-23-2014, 01:13 PM

It was 1050 + or - 50.

Tazicon · 04-23-2014, 02:27 PM

Quote:

Originally Posted by jwick

Yes it is and its a two piece but I have a G37 and I don't know any differences between 2008 and 2009 that impact driveshaft.

This, and why couldn't you post on MYG37? I have never had an issue in my years on there. Like was said I personally do not know of any differance between the years. I could be wrong but I really don't think anything changed with the drive shafts etc on the G37 Coupe 6MTs. Now if you have one of the 5MT that could be a different story.

ZBro16 · 04-24-2014, 12:24 PM

I imagine the shop may be confused as they could be looking at the sedan driveshaft by mistake. That would make sense in the context of the sedan, as the sedan was still on the 3.5L for MY2008 while that changed for MY2009. That would be different transmission/driveshaft setup.

As far as the coupe goes, I can't remember much, if any, differences between the two years aside from maybe different color swatches for interior/exterior.

hc_416 · 04-24-2014, 02:01 PM

Hey guys, back with a update. I found a company (pstds) that makes a carbon fiber driveshaft for my car. They also sell aluminum yokes to go with it. Really looking forward to see how it go's. I just did a round of mods which consist of, CF driveshaft with alu yokes, z1 3.90 gears and rebuild kit, CSF alu radiator/Cond, and a stillen oil cooler. I also have a lot of other mods. I really hope to break 320/240 on a mustang dyno with all the mods I have, thou it might be a little lofty, considering I only made 309/225 my last dyno, but that was with a bad tune/small air leak. Well thanks for all the help also I think the company makes driveshaft's for other cars if you would like to get one yourself.

Chuck33079 · 04-24-2014, 02:14 PM

Quote:

Originally Posted by hc_416

also I think the company makes driveshaft's for other cars if you would like to get one yourself.

We have a CF driveshaft stock.

04-22-2014, 07:46 PM	#16 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	How much is this driveshaft your looking at anyway? __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] SOCAL: Evo-R Carbon Fiber Side Blades, Seibon Gt-Style Carbon Fiber Front Lip's	sxfs4956	Parts for sale (Private Classifieds)	21	09-24-2014 07:15 AM
Carbon Fiber Quarter Panels...Full Carbon Fiber 370z :)	Carbon_z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	50	09-07-2014 10:05 PM
[FOR SALE] carbon fiber oem engine covers by carbon fiber element and dress up bolts	guru	Parts for sale (Private Classifieds)	12	12-16-2013 01:28 PM
Carbon Fiber DriveShaft?	Shadezz	Engine & Drivetrain	32	07-07-2013 08:48 PM
FS: Seibon Carbon Fiber Front Lip and EVO-R carbon fiber Side Skirts	tabrams31	North West Region	7	03-09-2011 04:56 PM

04-23-2014, 01:13 PM	#17 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 11	It was 1050 + or - 50.

04-24-2014, 12:24 PM	#19 (permalink)
ZBro16 Enthusiast Member Join Date: Nov 2011 Location: Huntsville, AL Posts: 370 Drives: A Z. Rep Power: 13	I imagine the shop may be confused as they could be looking at the sedan driveshaft by mistake. That would make sense in the context of the sedan, as the sedan was still on the 3.5L for MY2008 while that changed for MY2009. That would be different transmission/driveshaft setup. As far as the coupe goes, I can't remember much, if any, differences between the two years aside from maybe different color swatches for interior/exterior.

04-24-2014, 02:01 PM	#20 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 11	Hey guys, back with a update. I found a company (pstds) that makes a carbon fiber driveshaft for my car. They also sell aluminum yokes to go with it. Really looking forward to see how it go's. I just did a round of mods which consist of, CF driveshaft with alu yokes, z1 3.90 gears and rebuild kit, CSF alu radiator/Cond, and a stillen oil cooler. I also have a lot of other mods. I really hope to break 320/240 on a mustang dyno with all the mods I have, thou it might be a little lofty, considering I only made 309/225 my last dyno, but that was with a bad tune/small air leak. Well thanks for all the help also I think the company makes driveshaft's for other cars if you would like to get one yourself.