Need Help? Let me know!

bigaudiofanat · 09-14-2009, 09:19 PM

Hope to get a few more installs before winter. Will have one or 2 posted here by the end of the month.

bigaudiofanat · 09-16-2009, 05:28 PM

So my dad owns a 2008 BMW R1200RT motorcycle and he hats the electronic controlled fuse system. If you over load the circuit that it is programed for than it shut power off to it BMW calls it cambus. So he wanted to be able to add whatever he wanted to the bike without worrying about that. So I installed an aftermarket fuse block that has both switched power and constant ones as well. Enjoy the pics!

bigaudiofanat · 09-20-2009, 08:21 AM

Bump

bigaudiofanat · 09-22-2009, 06:28 PM

Bump

bigaudiofanat · 09-25-2009, 09:23 AM

Bumpy

*ICE* · 09-29-2009, 07:01 PM

can you mount a fuse holder on the side of the battery? I've seen a few pics here of the fuse holder but most of the battery has a plastic cover on it. Mine doesn't have it. Will the battery heat up on long trip and cause the plastic holder to melt or whatever? Thanks for the help!

bigaudiofanat · 10-03-2009, 06:23 AM

Well the plastic holder is not on all cars. On ones that do not have it I usually make a custom bracket to hold it. The plastic cover is nothing more than a cover, the battery is not going to heat up from there not being one. Sorry for the delay. Also yes one can be mounted as long as there is a cover. No cover means you can not mount one on the side.

bigaudiofanat · 10-21-2009, 09:41 AM

Thanks man!

bigaudiofanat · 10-27-2009, 06:31 PM

Bump

*ICE* · 10-27-2009, 10:37 PM

Pmed my question. Thanks for the help man!

slippy · 10-30-2009, 12:29 AM

pm sent

bigaudiofanat · 11-07-2009, 08:15 PM

No problem all questions were answered.

bigaudiofanat · 11-13-2009, 02:19 PM

Bump

jrniehaus · 11-22-2009, 11:14 AM

Hello again, Thanks for the help before. I have a new question. I have noticed that my bass seems to fade once and a while. I just noticed this recently. It seems that some days, the bass hits hard. Then on other days
it just doesn't seem to. Almost like it's a volume thing. I was wondering if you have any ideas if you think it may be the hu(kenwood ddx714) or the amp(hd 900-5). I have never heard of either of these units having a bass fading in or out problem. Have searched on the i-net and found no complaints with either. The other day I tried to use a computer program to RTA the sound
levels to bring it more flat. I also noticed that there is a peak around 10k htz with my focal 165 k2p upgraded version, that I can't get around. And I turned off the mid-high selector and I think I may put that back. The program didn't seem as good as when I used to use an actuall RTA machine. I want to fine tune the flatline, but first things first, I need to figure out the
bass fluctuation. Or, maybe it's just me. I am actually thinking of taking out the head unit again and making sure all the wires are correctly installed. The reason for this, is that I originally had someone install the deck for me and it was hooked to the factory speakers and amp. So, I installed the new stuff and just hooked up the wiring harness to have the pre amp outs. I physically unhooked the factory speakers and replaced them, but the wires are still going to the factory harness. Im wondering if I should disconnect that because I am pretty sure the factory amp is still turning on and off with the imputs still routed to the that factory amp. This could be an issue with the HU sending signal to the factory amp and the RCA's to the aftermarket stuff I added. Sorry to be long and drawn out, but I got a lot on my mind about this system, haha.

bigaudiofanat · 11-28-2009, 08:21 PM

Sorry for the delay, If the stock system was bose I would think that your head unit is somehow getting faded out threw the stock system. I would either way run new speaker wires, the head unit... is that powering the speakers or if a amp is I would check the crossovers and the filter to see what it is set on for your new speakers it should be set on full or high pass set at somewhere around 80 or 60

09-14-2009, 09:19 PM	#1 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Hope to get a few more installs before winter. Will have one or 2 posted here by the end of the month. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

09-16-2009, 05:28 PM	#2 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	So my dad owns a 2008 BMW R1200RT motorcycle and he hats the electronic controlled fuse system. If you over load the circuit that it is programed for than it shut power off to it BMW calls it cambus. So he wanted to be able to add whatever he wanted to the bike without worrying about that. So I installed an aftermarket fuse block that has both switched power and constant ones as well. Enjoy the pics! __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

09-20-2009, 08:21 AM	#3 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Bump __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

09-22-2009, 06:28 PM	#4 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Bump __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

09-25-2009, 09:23 AM	#5 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Bumpy __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

09-29-2009, 07:01 PM	#6 (permalink)
ICE Base Member Join Date: Jul 2009 Location: Las Vegas Posts: 102 Drives: Infiniti G37S Rep Power: 17	can you mount a fuse holder on the side of the battery? I've seen a few pics here of the fuse holder but most of the battery has a plastic cover on it. Mine doesn't have it. Will the battery heat up on long trip and cause the plastic holder to melt or whatever? Thanks for the help! __________________

10-03-2009, 06:23 AM	#7 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Well the plastic holder is not on all cars. On ones that do not have it I usually make a custom bracket to hold it. The plastic cover is nothing more than a cover, the battery is not going to heat up from there not being one. Sorry for the delay. Also yes one can be mounted as long as there is a cover. No cover means you can not mount one on the side. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

10-21-2009, 09:41 AM	#8 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Thanks man! __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

10-27-2009, 06:31 PM	#9 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Bump __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

10-27-2009, 10:37 PM	#10 (permalink)
ICE Base Member Join Date: Jul 2009 Location: Las Vegas Posts: 102 Drives: Infiniti G37S Rep Power: 17	Pmed my question. Thanks for the help man! __________________

10-30-2009, 12:29 AM	#11 (permalink)
slippy Base Member Join Date: Apr 2009 Location: Jer Z Posts: 12 Drives: 09 370Z Rep Power: 18	pm sent Last edited by slippy; 11-03-2009 at 03:48 PM.

11-07-2009, 08:15 PM	#12 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	No problem all questions were answered. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

11-13-2009, 02:19 PM	#13 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Bump __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

11-22-2009, 11:14 AM	#14 (permalink)
jrniehaus Base Member Join Date: Oct 2009 Location: Phx,AZ Posts: 45 Drives: 370z 6spd sport mdl Rep Power: 17	question about bass fading in and out Hello again, Thanks for the help before. I have a new question. I have noticed that my bass seems to fade once and a while. I just noticed this recently. It seems that some days, the bass hits hard. Then on other days it just doesn't seem to. Almost like it's a volume thing. I was wondering if you have any ideas if you think it may be the hu(kenwood ddx714) or the amp(hd 900-5). I have never heard of either of these units having a bass fading in or out problem. Have searched on the i-net and found no complaints with either. The other day I tried to use a computer program to RTA the sound levels to bring it more flat. I also noticed that there is a peak around 10k htz with my focal 165 k2p upgraded version, that I can't get around. And I turned off the mid-high selector and I think I may put that back. The program didn't seem as good as when I used to use an actuall RTA machine. I want to fine tune the flatline, but first things first, I need to figure out the bass fluctuation. Or, maybe it's just me. I am actually thinking of taking out the head unit again and making sure all the wires are correctly installed. The reason for this, is that I originally had someone install the deck for me and it was hooked to the factory speakers and amp. So, I installed the new stuff and just hooked up the wiring harness to have the pre amp outs. I physically unhooked the factory speakers and replaced them, but the wires are still going to the factory harness. Im wondering if I should disconnect that because I am pretty sure the factory amp is still turning on and off with the imputs still routed to the that factory amp. This could be an issue with the HU sending signal to the factory amp and the RCA's to the aftermarket stuff I added. Sorry to be long and drawn out, but I got a lot on my mind about this system, haha.

11-28-2009, 08:21 PM	#15 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Sorry for the delay, If the stock system was bose I would think that your head unit is somehow getting faded out threw the stock system. I would either way run new speaker wires, the head unit... is that powering the speakers or if a amp is I would check the crossovers and the filter to see what it is set on for your new speakers it should be set on full or high pass set at somewhere around 80 or 60 __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/