Question about Fumoto valve

baldie · 05-31-2011, 11:09 PM

is an oem crusher wash needed for the valve? or can one just use the washer that comes with the fumoto? thanks in advance

Billarf · 06-01-2011, 06:18 AM

Do not use a Nissan crush washer. Use the Fumoto provided blue fiber washer only. Just before installing your Fumoto Oil Drain Valve, very lightly coat the blue fiber washer with some oil. Do not soak the washer, just rub a little bit on both sides of the washer and then do the install. Remember the Fumoto valve is made of brass so tighten it up snugly but don't overtighten / get to rough with it. You use a Fumoto F103 or F103N (nipple) on the 370Z.

05-31-2011, 11:09 PM	#1 (permalink)
baldie Base Member Join Date: Feb 2011 Location: California Posts: 62 Drives: 2011 Mustang GT Rep Power: 14	Question about Fumoto valve is an oem crusher wash needed for the valve? or can one just use the washer that comes with the fumoto? thanks in advance __________________ 2011 Mustang GT 5.0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Valve Covers	SxExCx	Parts for sale (Private Classifieds)	5	11-24-2010 11:50 AM
Valve Caps and TPMS	Ty Weezy	Wheels & Tires	4	10-21-2010 01:53 PM
Blow-off valve	Unforgotten	Engine & Drivetrain	77	06-10-2010 06:22 PM
Valve Adjustment	370zFORme!!	Engine & Drivetrain	34	04-22-2010 02:21 AM
Valve coming to Mac?	theDreamer	The Lounge (Off Topic)	12	04-02-2010 08:12 PM

06-01-2011, 06:18 AM	#2 (permalink)
Billarf Base Member Join Date: Mar 2010 Location: NY Posts: 132 Drives: . Rep Power: 15	Do not use a Nissan crush washer. Use the Fumoto provided blue fiber washer only. Just before installing your Fumoto Oil Drain Valve, very lightly coat the blue fiber washer with some oil. Do not soak the washer, just rub a little bit on both sides of the washer and then do the install. Remember the Fumoto valve is made of brass so tighten it up snugly but don't overtighten / get to rough with it. You use a Fumoto F103 or F103N (nipple) on the 370Z.