Can't go past 2500 RPM! Help!

Corona370z

Well it has been like an hour and decided to check if it was the temp that was causing the issue but its not. I turned the car on and the temp was all the way down so I decided to test it and in neutral, no clutch in, I pressed the gas and it won't go past 2500RPM. The needle looks like it hits a wall and bounces back and the car feels like it wants to stall, even in neutral. Thanks for the input though and I will look into an oil cooler pretty soon.

__________________
Stillen Intake, ARK Exhaust. Hopefully in the near future: Tanabe GF210 Lowering Springs, Hotchkis Sway Bars, Motordyne M370 Intake Manifold.

Red__Zed

Is the ecu throwing a code? Can you read it?


I'd also check your oil/fuel/etc levels.

Corona370z

I did check all the fluids and I am not sure what you mean by the ECU throwing a code. Like if it's telling me something on the warning part by the fuel gauge, then no it says nothing. All it says on the dash is "Service Engine Soon" It sounds like it is some mechanical problem, Like the car can get me from A-B on any gear, as long as it's under 2500RPM

__________________
Stillen Intake, ARK Exhaust. Hopefully in the near future: Tanabe GF210 Lowering Springs, Hotchkis Sway Bars, Motordyne M370 Intake Manifold.