Engine problems when making right turn. Help please.

GrayGhost · 12-06-2019, 10:20 AM

So when making a right turn, spiritedly, my car seems like it goes into limp mode when rolling in the throttle coming out of the turn. Doesn’t seem to do it on left turns. It’s intermittent too during the turn where i can keep the throttle at the same spot and power goes on and off. Almost like a wire isn’t fully connected and flickers, but only on right turns.

I have stillen intakes, art pipes, and the rest of the exhaust.

It’s been throwing a p2a00 code which i have been clearing because i thought it was due to the art pipes. Maybe not, poor assumption?

Full tank too.

I used a scanner to log o2 readings but haven’t had the chance to review the logs.

Any thoughts?

Sent from my iPhone using Tapatalk

sirnixalot · 12-06-2019, 10:33 AM

Check the fuel pump top hat connector maybe

wideglideleon · 12-06-2019, 11:22 AM

sounds like Fuel starvation issues to me.

GrayGhost · 12-06-2019, 04:01 PM

Thanks guys! I will look into that. I thought fuel problems were from left turns so I disregarded fuel hat issue.

Sent from my iPhone using Tapatalk

redondoaveb · 12-06-2019, 04:17 PM

Quote:

Originally Posted by GrayGhost

Thanks guys! I will look into that. I thought fuel problems were from left turns so I disregarded fuel hat issue.

Sent from my iPhone using Tapatalk

Just the opposite, right hand turns. Try it with a full tank of gas and see if it still happens.

GrayGhost · 12-06-2019, 04:35 PM

Im at 90% full... also, I got fuel starve on a left turn (turn 1) at Sebring so thats also why I thought left.

Sent from my iPhone using Tapatalk

redondoaveb · 12-06-2019, 05:07 PM

Quote:

Originally Posted by GrayGhost

Im at 90% full... also, I got fuel starve on a left turn (turn 1) at Sebring so thats also why I thought left.

Sent from my iPhone using Tapatalk

That's above my pay grade

I only know about fuel starve on right hand turns.

loiro370z · 12-13-2019, 02:26 PM

check the fuel pump, the older pump them to break,
drove for about two month with the pump hanging by the hose and wires.

GrayGhost · 12-18-2019, 12:26 PM

Just placed the order for the new hat. Thanks guys!

My issues have gotten worse. I can’t even accelerate too fast without hitting that imaginary brick wall.

Is it possible for any of the wiring to become exposed or unhooked and cause a spark within the tank?

Also, looking at install instructions they say you want to get to 1/8 tank before starting the procedure. Whats the risk or added difficulties being at say half tank? I feel like this thing is hanging by the wires, its so sensitive

Sent from my iPhone using Tapatalk

JARblue · 12-18-2019, 04:56 PM

I hope you got the CJM billet top hat and not another plastic OEM one

I haven't torn into my fuel system yet even though I know my top hat is broken, so I'm no expert. But I'm pretty sure I drove around (still fairly aggressively) with a busted top hat for nearly 10K before parking the car last year. All of the elements there are intended to be exposed to gas, so I think you're probably ok. Someone like Charles at CJM would have more knowledgeable insight.

As for the half tank, you'll just need to siphon it. I've heard people say it can be a pain to siphon through the gas fill neck but it's certainly easy from inside the vehicle once you get to it. Just have a fan handy to help clear out the fumes.

sirnixalot · 12-18-2019, 05:18 PM

Disconnect the battery and you will be fine. The reason to have less fuel in the tank when doing this job is mainly to stop you from getting fuel everywhere and messing up the interior.

I had a sacrificial towel laid down, if you have a small 1gal bucket that helps too since you can lift the assembly straight up and drop it in the bucket

12-06-2019, 10:20 AM	#1 (permalink)
GrayGhost Base Member Join Date: Sep 2017 Location: Florida Posts: 106 Drives: 40TH Rep Power: 7	Engine problems when making right turn. Help please. So when making a right turn, spiritedly, my car seems like it goes into limp mode when rolling in the throttle coming out of the turn. Doesn’t seem to do it on left turns. It’s intermittent too during the turn where i can keep the throttle at the same spot and power goes on and off. Almost like a wire isn’t fully connected and flickers, but only on right turns. I have stillen intakes, art pipes, and the rest of the exhaust. It’s been throwing a p2a00 code which i have been clearing because i thought it was due to the art pipes. Maybe not, poor assumption? Full tank too. I used a scanner to log o2 readings but haven’t had the chance to review the logs. Any thoughts? Sent from my iPhone using Tapatalk

12-06-2019, 10:33 AM	#2 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57453	Check the fuel pump top hat connector maybe loiro370z, wideglideleon and "Z"en like this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

12-06-2019, 11:22 AM	#3 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64085	sounds like Fuel starvation issues to me. Eagle, elhombre and sirnixalot like this.

12-06-2019, 04:35 PM	#6 (permalink)
GrayGhost Base Member Join Date: Sep 2017 Location: Florida Posts: 106 Drives: 40TH Rep Power: 7	Im at 90% full... also, I got fuel starve on a left turn (turn 1) at Sebring so thats also why I thought left. Sent from my iPhone using Tapatalk redondoaveb likes this.

12-18-2019, 12:26 PM	#9 (permalink)
GrayGhost Base Member Join Date: Sep 2017 Location: Florida Posts: 106 Drives: 40TH Rep Power: 7	Just placed the order for the new hat. Thanks guys! My issues have gotten worse. I can’t even accelerate too fast without hitting that imaginary brick wall. Is it possible for any of the wiring to become exposed or unhooked and cause a spark within the tank? Also, looking at install instructions they say you want to get to 1/8 tank before starting the procedure. Whats the risk or added difficulties being at say half tank? I feel like this thing is hanging by the wires, its so sensitive Sent from my iPhone using Tapatalk 2011370zblue likes this.

12-06-2019, 04:01 PM	#4 (permalink)
GrayGhost Base Member Join Date: Sep 2017 Location: Florida Posts: 106 Drives: 40TH Rep Power: 7	Thanks guys! I will look into that. I thought fuel problems were from left turns so I disregarded fuel hat issue. Sent from my iPhone using Tapatalk

12-13-2019, 02:26 PM	#8 (permalink)
loiro370z Enthusiast Member Join Date: Jul 2013 Location: Miami Beach/Sao Paulo Posts: 408 Drives: 11 nissan 370z Rep Power: 23507	check the fuel pump, the older pump them to break, drove for about two month with the pump hanging by the hose and wires.

12-18-2019, 04:56 PM	#10 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	I hope you got the CJM billet top hat and not another plastic OEM one I haven't torn into my fuel system yet even though I know my top hat is broken, so I'm no expert. But I'm pretty sure I drove around (still fairly aggressively) with a busted top hat for nearly 10K before parking the car last year. All of the elements there are intended to be exposed to gas, so I think you're probably ok. Someone like Charles at CJM would have more knowledgeable insight. As for the half tank, you'll just need to siphon it. I've heard people say it can be a pain to siphon through the gas fill neck but it's certainly easy from inside the vehicle once you get to it. Just have a fan handy to help clear out the fumes. sx moneypit and sirnixalot like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

12-18-2019, 05:18 PM	#11 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57453	Disconnect the battery and you will be fine. The reason to have less fuel in the tank when doing this job is mainly to stop you from getting fuel everywhere and messing up the interior. I had a sacrificial towel laid down, if you have a small 1gal bucket that helps too since you can lift the assembly straight up and drop it in the bucket sx moneypit and Zingston like this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine won't turn over, car beeping	Herb Hoover	Engine & Drivetrain	2	11-05-2018 08:10 PM
Engine will turn but won't start	King_Ch1cas	Engine & Drivetrain	9	10-08-2016 01:02 AM
Engine making weird noise help?	Bao Tran	Engine & Drivetrain	17	11-11-2014 02:05 PM
Engine making clapping sound, is this normal?	ohohoh123456	Engine & Drivetrain	32	09-17-2013 01:04 PM
Engine turn over	bigZ	Engine & Drivetrain	8	07-01-2011 06:50 AM