What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

onzedge · 03-20-2016, 05:33 AM

Quote:

Originally Posted by Haboob

5h drive to Silver City, NM. Met up with Tigger. Drove up the Pinos Altos and down, lunch, then a 5h drive back to Phoenix for me.

Haven't washed her in over a month, then murdered about 10,000 bugs on the drive over and up.

( Click to show/hide )

accludegt30 · 03-20-2016, 09:55 AM

I painted lips wheel today . (thank you to cooltoy for the photoshop in the photoshop tread)

They were like this:

once rear wheel repaired
(discs were changed since this picture btw)

And how it looks now.

Difference with older brushed lips ( I just did the front for now cause of the cold weather )

Brushed lips were nice but they were to dammaged

What you guys think (and btw, haha sorry for my poor english, I try my best)

Breadz · 03-20-2016, 07:12 PM

Swift springs SPC camber arms and toe bolts done today, will finish off front springs tomorrow

onzedge · 03-21-2016, 07:06 AM

Quote:

Originally Posted by Breadz

Swift springs SPC camber arms and toe bolts done today, will finish off front springs tomorrow

Z_ealot · 03-20-2016, 07:32 PM

Swapped out rear rotors and pads today....pain in the rear, but at least it's done lol

Memphis370Z · 03-20-2016, 08:13 PM

I've come to the conclusion that my exhaust is too quiet, so, yesterday, dragonbreath and I installed a set of straight pipe axle backs on my Z. Unfortunately, it was waaaaay too loud. Lots of rasp too. We drove it around for about five minutes and nearly became deaf. I did a few half-throttle pulls and I would venture to guess that I could be heard a half-mile away. This is the only vid that we shot, but it gives you an idea. The rev at the end was only about 3k RPM.

JARblue · 03-21-2016, 06:52 PM

Z got a nice wash thanks to a bird $hit attack this afternoon.

onzedge · 03-21-2016, 06:54 PM

Quote:

Originally Posted by JARblue

Z got a nice wash thanks to a bird $hit attack this afternoon.

JARblue · 03-21-2016, 07:02 PM

Quote:

Originally Posted by onzedge

Breadz · 03-21-2016, 07:22 PM

Finished swift springs in the front and then ordered some bronze forgestar f14's

ignore white cutout

kenchan · 03-25-2016, 06:16 PM

Quote:

Originally Posted by Breadz

Finished swift springs in the front and then ordered some bronze forgestar f14's

ignore white cutout

u are aware your picture is geo-tagged, right?

accludegt30 · 03-24-2016, 11:45 AM

It`s hard to see but new zoom engineering monaco carbon rear view mirror

DeliriousClam · 03-21-2016, 07:49 PM

please don't tell me you used only the jack to hold the car up...

Breadz · 03-21-2016, 07:58 PM

was safe dont worry multiple things holding it up, cant see cause the cutout, didnt want my dads pic here

axmea? · 03-22-2016, 12:36 AM

Quote:

Originally Posted by DeliriousClam

please don't tell me you used only the jack to hold the car up...

I saw a jackstand.

03-20-2016, 09:55 AM	#2 (permalink)
accludegt30 Base Member Join Date: Dec 2015 Location: Canada Posts: 28 Drives: 2010 40th Z Rep Power: 10	I painted lips wheel today . (thank you to cooltoy for the photoshop in the photoshop tread) They were like this: once rear wheel repaired (discs were changed since this picture btw) And how it looks now. Difference with older brushed lips ( I just did the front for now cause of the cold weather ) Brushed lips were nice but they were to dammaged What you guys think (and btw, haha sorry for my poor english, I try my best) Last edited by accludegt30; 03-21-2016 at 09:52 AM.

03-20-2016, 07:12 PM	#3 (permalink)
Breadz Base Member Join Date: Jan 2015 Location: Clovis Cali Posts: 240 Drives: 12 370z sport 6mt GM Rep Power: 11	Swift springs SPC camber arms and toe bolts done today, will finish off front springs tomorrow __________________ Fast Intentions Non res CF, CF Duckbill, Stillen G3, Fujimura Diffuser, Swift Springs, 180 Headlights, Forgestar F14Bronze

03-21-2016, 06:52 PM	#7 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Z got a nice wash thanks to a bird $hit attack this afternoon. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

03-21-2016, 07:22 PM	#10 (permalink)
Breadz Base Member Join Date: Jan 2015 Location: Clovis Cali Posts: 240 Drives: 12 370z sport 6mt GM Rep Power: 11	Finished swift springs in the front and then ordered some bronze forgestar f14's ignore white cutout __________________ Fast Intentions Non res CF, CF Duckbill, Stillen G3, Fujimura Diffuser, Swift Springs, 180 Headlights, Forgestar F14Bronze Last edited by Breadz; 03-22-2016 at 01:20 AM. Reason: editing whitecutout to show jack's

03-21-2016, 07:49 PM	#13 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54273	please don't tell me you used only the jack to hold the car up... __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

03-20-2016, 07:32 PM	#5 (permalink)
Z_ealot A True Z Fanatic Join Date: Sep 2010 Location: Albuquerque, NM Posts: 2,045 Drives: 09 370Z Touring/Sprt Rep Power: 10091	Swapped out rear rotors and pads today....pain in the rear, but at least it's done lol

03-20-2016, 08:13 PM	#6 (permalink)
Memphis370Z A True Z Fanatic Join Date: Sep 2014 Location: Memphis Area Posts: 3,118 Drives: '09 MB Rep Power: 124434	I've come to the conclusion that my exhaust is too quiet, so, yesterday, dragonbreath and I installed a set of straight pipe axle backs on my Z. Unfortunately, it was waaaaay too loud. Lots of rasp too. We drove it around for about five minutes and nearly became deaf. I did a few half-throttle pulls and I would venture to guess that I could be heard a half-mile away. This is the only vid that we shot, but it gives you an idea. The rev at the end was only about 3k RPM.

03-24-2016, 11:45 AM	#12 (permalink)
accludegt30 Base Member Join Date: Dec 2015 Location: Canada Posts: 28 Drives: 2010 40th Z Rep Power: 10	It`s hard to see but new zoom engineering monaco carbon rear view mirror

03-21-2016, 07:58 PM	#14 (permalink)
Breadz Base Member Join Date: Jan 2015 Location: Clovis Cali Posts: 240 Drives: 12 370z sport 6mt GM Rep Power: 11	was safe dont worry multiple things holding it up, cant see cause the cutout, didnt want my dads pic here __________________ Fast Intentions Non res CF, CF Duckbill, Stillen G3, Fujimura Diffuser, Swift Springs, 180 Headlights, Forgestar F14Bronze Last edited by Breadz; 03-21-2016 at 08:46 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 04:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 06:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM