What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

jdsto · 04-12-2015, 08:07 PM

installed RJM clutch pedal today. Man what a pain in the but working under the dash, i'm going to be sore tomorrow.

The change in the feel of the clutch is truly remarkable. So much easier to be smooth. Now it just feels "right".

onzedge · 04-13-2015, 07:58 AM

Quote:

Originally Posted by jdsto

installed RJM clutch pedal today. Man what a pain in the but working under the dash, i'm going to be sore tomorrow.

The change in the feel of the clutch is truly remarkable. So much easier to be smooth. Now it just feels "right".

mishuko · 04-13-2015, 07:41 AM

yesterday did the first wash, clay, wax of the year.

found a few deep scratches that won't buff out... oh well... it happens.

decided to try the meguiar's ultimate wax paste, was using the gold before. we'll see how it holds up and i'll decide between the two.

kenchan · 04-13-2015, 07:49 AM

Quote:

Originally Posted by mishuko

yesterday did the first wash, clay, wax of the year.

found a few deep scratches that won't buff out... oh well... it happens.

decided to try the meguiar's ultimate wax paste, was using the gold before. we'll see how it holds up and i'll decide between the two.

did you have a bed frame fall on your z's butt?

mishuko · 04-13-2015, 08:39 AM

Quote:

Originally Posted by kenchan

did you have a bed frame fall on your z's butt?

lol it's not that bad! i can account for one but the one on the roof i'm a little puzzled...

i also realized i'm still swirling the pain with my washes. need to practice my technique

kenchan · 04-13-2015, 08:44 AM

Quote:

Originally Posted by mishuko

lol it's not that bad! i can account for one but the one on the roof i'm a little puzzled...

i also realized i'm still swirling the pain with my washes. need to practice my technique

Hope you're not using a sponge?

BC416 · 04-13-2015, 08:53 AM

Got my F.I. exhaust installed and my Sport Rays back on. Proceeded to do a nice little wash Saturday morning and went for a cruise. It's like a whole new car with the exhaust on. I cannot stop rolling into the throttle at 3.5k and listening to the symphony the car makes.

jpkirk · 04-13-2015, 10:07 AM

kenchan · 04-13-2015, 11:16 AM

yah the car is definitely too quiet in stock form.

DatsunFTW · 04-13-2015, 06:44 PM

Installed my Z1 25 row oil cooler in prep for Zdayz!

Also did some simple clean up like my filters and etc. and the Z sounds nice and pure.
Now I just need to lift the car back up one of these days and tighten up the heat shield. It is buzzing and quite frustrating when downshifting...

20150413_113716 by datsunpride, on Flickr

20150413_125815 by datsunpride, on Flickr

20150413_125844 by datsunpride, on Flickr

cigarclifford · 04-13-2015, 09:59 PM

Quote:

Originally Posted by DatsunFTW

Installed my Z1 25 row oil cooler in prep for Zdayz!

Also did some simple clean up like my filters and etc. and the Z sounds nice and pure.
Now I just need to lift the car back up one of these days and tighten up the heat shield. It is buzzing and quite frustrating when downshifting...

20150413_113716 by datsunpride, on Flickr

20150413_125815 by datsunpride, on Flickr

20150413_125844 by datsunpride, on Flickr

Very nice..........

-Clifford

onzedge · 04-14-2015, 07:01 AM

Quote:

Originally Posted by cigarclifford

Very nice..........

-Clifford

onzedge · 04-14-2015, 07:00 AM

Quote:

Originally Posted by DatsunFTW

Installed my Z1 25 row oil cooler in prep for Zdayz!

Also did some simple clean up like my filters and etc. and the Z sounds nice and pure.
Now I just need to lift the car back up one of these days and tighten up the heat shield. It is buzzing and quite frustrating when downshifting...

20150413_113716 by datsunpride, on Flickr

20150413_125815 by datsunpride, on Flickr

20150413_125844 by datsunpride, on Flickr

How is the clearance with the sandwich plate and the factory oil cooler plate?

By the way, nice work.

DatsunFTW · 04-14-2015, 10:26 AM

Quote:

Originally Posted by onzedge

How is the clearance with the sandwich plate and the factory oil cooler plate?

By the way, nice work.

Thank you.
Factory oil cooler plate?

Spooler · 04-14-2015, 10:47 AM

Quote:

Originally Posted by DatsunFTW

Thank you.
Factory oil cooler plate?

See the gold color plate with cooler line between the sandwinch plate and the block? Factory oil cooler.

04-12-2015, 08:07 PM	#1 (permalink)
jdsto Enthusiast Member Join Date: Feb 2014 Location: Toronto Posts: 250 Drives: Honda VFR800F 2015 Rep Power: 18	installed RJM clutch pedal today. Man what a pain in the but working under the dash, i'm going to be sore tomorrow. The change in the feel of the clutch is truly remarkable. So much easier to be smooth. Now it just feels "right". __________________ Gone but not forgotten

04-13-2015, 08:53 AM	#7 (permalink)
BC416 Track Member Join Date: Jun 2014 Location: NJ Age: 38 Posts: 718 Drives: 2012 KAD 6MT Rep Power: 593	Got my F.I. exhaust installed and my Sport Rays back on. Proceeded to do a nice little wash Saturday morning and went for a cruise. It's like a whole new car with the exhaust on. I cannot stop rolling into the throttle at 3.5k and listening to the symphony the car makes. __________________ F.I. / K&N / 180 / Forgestar

04-13-2015, 10:07 AM	#8 (permalink)
jpkirk A True Z Fanatic Join Date: Jun 2012 Location: Merry Land Posts: 5,515 Drives: '14 MidBlu ST MT Rep Power: 3377	__________________ intake \| exhaust \| wheels \| tires \| suspension ... um ... stock, do speed stickers count? intake \| exhaust \| TE37 SL \| RE-11 \| suspension ... um ... do speed stickers count? Signature under construction

04-13-2015, 06:44 PM	#10 (permalink)
DatsunFTW A True Z Fanatic Join Date: Apr 2013 Location: Gainesville, FL Posts: 1,234 Drives: 12 370z A54 M6 Rep Power: 380	Installed my Z1 25 row oil cooler in prep for Zdayz! Also did some simple clean up like my filters and etc. and the Z sounds nice and pure. Now I just need to lift the car back up one of these days and tighten up the heat shield. It is buzzing and quite frustrating when downshifting... 20150413_113716 by datsunpride, on Flickr 20150413_125815 by datsunpride, on Flickr 20150413_125844 by datsunpride, on Flickr __________________ The Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 04:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 06:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM

04-13-2015, 07:41 AM	#3 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9435	yesterday did the first wash, clay, wax of the year. found a few deep scratches that won't buff out... oh well... it happens. decided to try the meguiar's ultimate wax paste, was using the gold before. we'll see how it holds up and i'll decide between the two.

04-13-2015, 11:16 AM	#9 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yah the car is definitely too quiet in stock form.