Factory Back up camera

Cjanik

antbear should be in the clear.

I've done so much research that ive ripped my entire car apart, installed a factory OEM camera, and connected all the wires that I believed to be necessary.(made up my own wires, no harness) I got the camera to work, I just cant fiqure out what wire will trigger the nav to switch to CAM AUX INPUT until you go out of reverse then switch back to the last mode.

with that said, yes this kit will work, I dont care what that 370tune guy says, the kit WILL WORK. it is the same kit used on all nissan's and infiniti's, same plugs, same units, same everything.

the downside? I dont think our 370z comes with a steering angle sensor (could be wrong). if thats the case, the lines that appear on the camera will not move right or left with your steering wheel.

antbear

Cjanik.............

Thanks for the reassuring comments. Next week I will know if all that Japanese yen was well spent.

Do you believe your system would work like it should if you had the OEM wiring harness or that box?

Cjanik

yes I think my system would work if I had that box.
Whats happening is the box sends voltage to the NAV when you go in reverse which tells it to switch to rear cam input. when you leave reverse, it tells it to go back. it also does the lines and powers the camera and many other things, but I dont need that as i've got everything to work without it.

ive found 5v goes to pin 40 of the NAV unit (not documented on our 370z but documented on all nissan/infiniti backup camera capable vehicles) but i cant get it to work. might have to trigger something else at the same time that I am unaware of.

billydsz

Rhood, what about these steering lines does your unit display them and do they move with the steering wheel??