2012 Oil Cooler and Stillen Plate Holder

Jimc · 08-19-2013, 06:13 PM

Question on the 2012 oil cooler, in looking at the car and the manual it seems like the oil cooler uses water after circulating it through the short length of tubing at the front of the grill.

The last couple of days it has the weather has cooled a bit and yet I still noticed by oil temp running slightly higher than 220, city driving. Then I noticed that the Stillen Plate holder in the tow hook mount positions the plate right in front of the tubing running back to the cooler.

Now I am curious if anyone else has found that this is blocking the air flow to an already questionable oil cooler in the 2012. Tomorrow I will pull it on the drive to work and note the oil temp and update this thread if someone has not already made this observation.

Regards,

Jim

ShutokuZ · 08-23-2013, 05:27 PM

Hello Jim,
I have the GoMiniGo plate mount and it sits close to the oil coller also. I cannot say wether or not it is affecting my stock oil cooler temps, asI put it on while I was still breaking the car in. However with it on, I do see a constant 220 during normal city driving in 60-70 degree weather.

Jimc · 08-23-2013, 08:00 PM

Still testing, but it seems to be adding a bit to the temp. Hard to say for sure. My temps are just over 220 in city traffic.

martin82 · 08-23-2013, 08:47 PM

That tubing is power steering cooler not the stock cooler. The stock cooler is by the air filter, uses coolant to radiator and back

olddudesrule · 08-23-2013, 09:56 PM

What Martin said..^. An aftermarket oil cooler will mount on the opposite side of the radiator (opposite from the PS cooler you were referring to), so your Stillen plate holder won't affect the airflow to that side of the radiator.
I was also seeing 220 degrees routinely around town. That's really not high oil temp at all, especially if you're running synthetics, but if you want to reduce the oil temps, an aftermarket cooler is the way to go.

martin82 · 08-23-2013, 10:35 PM

Unless you track a 2nd aftermarket cooler is not needed.

Jimc · 08-24-2013, 10:34 AM

For the 2012 are you saying that the small cooler in front of the radiator and on the passenger side by the tow hook is pwr steering not oil?

martin82 · 08-24-2013, 12:04 PM

Correct that is your power steering cooler

08-19-2013, 06:13 PM	#1 (permalink)
Jimc Base Member Join Date: May 2013 Location: New Jersey Age: 74 Posts: 97 Drives: 12 Vert Tour BS M6 Rep Power: 11	2012 Oil Cooler and Stillen Plate Holder Question on the 2012 oil cooler, in looking at the car and the manual it seems like the oil cooler uses water after circulating it through the short length of tubing at the front of the grill. The last couple of days it has the weather has cooled a bit and yet I still noticed by oil temp running slightly higher than 220, city driving. Then I noticed that the Stillen Plate holder in the tow hook mount positions the plate right in front of the tubing running back to the cooler. Now I am curious if anyone else has found that this is blocking the air flow to an already questionable oil cooler in the 2012. Tomorrow I will pull it on the drive to work and note the oil temp and update this thread if someone has not already made this observation. Regards, Jim

08-23-2013, 08:47 PM	#4 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	That tubing is power steering cooler not the stock cooler. The stock cooler is by the air filter, uses coolant to radiator and back Jimc likes this.

08-23-2013, 09:56 PM	#5 (permalink)
olddudesrule Enthusiast Member Join Date: Apr 2013 Location: Gilbert, AZ Posts: 252 Drives: 2012 Nismo Rep Power: 12	What Martin said..^. An aftermarket oil cooler will mount on the opposite side of the radiator (opposite from the PS cooler you were referring to), so your Stillen plate holder won't affect the airflow to that side of the radiator. I was also seeing 220 degrees routinely around town. That's really not high oil temp at all, especially if you're running synthetics, but if you want to reduce the oil temps, an aftermarket cooler is the way to go. Jimc likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Stillen Dual Exhaust & Stillen front plate holder Pick up in Bay Area	A7594217	Parts for sale (Private Classifieds)	17	08-04-2013 11:27 PM
[FOR SALE] Stillen License Plate Holder	usmc_nick	Parts for sale (Private Classifieds)	4	12-03-2012 01:53 AM
[FOR SALE] Stillen Front License Plate Holder (toe hook)	zcar_dad	Parts for sale (Private Classifieds)	2	05-14-2012 10:43 AM
[WTB] STILLEN front license plate holder	Vbp6US	Parts for sale (Private Classifieds)	3	05-01-2012 02:47 AM
Wtb: Stillen front license plate holder	shawn84	Wanted	10	06-14-2010 10:33 AM

08-23-2013, 05:27 PM	#2 (permalink)
ShutokuZ Track Member Join Date: Oct 2012 Location: Honolulu Posts: 512 Drives: 2013 PW 6MT Sport Rep Power: 13	Hello Jim, I have the GoMiniGo plate mount and it sits close to the oil coller also. I cannot say wether or not it is affecting my stock oil cooler temps, asI put it on while I was still breaking the car in. However with it on, I do see a constant 220 during normal city driving in 60-70 degree weather.

08-23-2013, 08:00 PM	#3 (permalink)
Jimc Base Member Join Date: May 2013 Location: New Jersey Age: 74 Posts: 97 Drives: 12 Vert Tour BS M6 Rep Power: 11	Still testing, but it seems to be adding a bit to the temp. Hard to say for sure. My temps are just over 220 in city traffic.

08-23-2013, 10:35 PM	#6 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	Unless you track a 2nd aftermarket cooler is not needed.

08-24-2013, 10:34 AM	#7 (permalink)
Jimc Base Member Join Date: May 2013 Location: New Jersey Age: 74 Posts: 97 Drives: 12 Vert Tour BS M6 Rep Power: 11	For the 2012 are you saying that the small cooler in front of the radiator and on the passenger side by the tow hook is pwr steering not oil?

08-24-2013, 12:04 PM	#8 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	Correct that is your power steering cooler