Rear End Noise

bradz · 11-12-2009, 06:54 PM

They just put grease on my rear axle assembly and whalllaaaaaaa clicking noise gone. This was since 3 months ago.

bilo · 11-13-2009, 12:34 AM

ok here it is off my invoice:
tech notes-tech was adised from tech line to perform bulletin on noise from axels. "note" this is a temp fix, if noise comes back on need to conact nissan. Tech removed both rear axels, regreased them, and turned them 180 degrees from their original spot.
DAT: 40073-0L700 Sympt code: ZL DIAG CODE: 46

ok so after this maintence was done I felt a WORLD! of difference. The car is way torqier. Also my VDC doesnt ingage so pointlessly. I used to give the car some gas and the VDC would just kick in at very little torque. Sooo....my guess was the "looseness" in the fangs inside the pumpkin where triping the VDC into thinking slip. bottom line....after having my car for 4 months, I finally took it for its first real drive today and felt what she should have been like the whole time.

Dealer info:
Nissan of Visalia
(559) 734-3333

if this helps then please hit me up for cred points...lol thanks.

nynhex · 05-20-2011, 02:13 PM

Sorry to ressurect such an old thread, but this was my experience with the problem:

This issue is covered in a TSB but Mossy Nissan here in Houston said that the procedure of rotating the axles and greasing the diff/etc is considered an "adjustment" and only covered in the first 12,000 miles of service.

So I had to drop my car off with them for 3 hours and will probably end up having to pay 350+ for them to fix it.

Totally sucks, but I guess in the end it's cheaper than an axle or cv going out. (Shrug)

spearfish25 · 06-23-2011, 05:04 PM

Removing the drive shafts has nothing to do with the inner workings of the rear differential. The shafts bolt to the flanges on the differential and insert into each rear wheel hub. Removing, greasing, and rotating only involves unbolting the shafts from the rear diff flanges, removing them from their respective hubs, regreasing, and reinstalling 180 rotated. With a lift, this is a 1 hour job.

06-23-2011, 05:04 PM	#19 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	Removing the drive shafts has nothing to do with the inner workings of the rear differential. The shafts bolt to the flanges on the differential and insert into each rear wheel hub. Removing, greasing, and rotating only involves unbolting the shafts from the rear diff flanges, removing them from their respective hubs, regreasing, and reinstalling 180 rotated. With a lift, this is a 1 hour job. __________________ 2013 Cadillac V-Wagon, RIP Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1st gear noise	rench	Engine & Drivetrain	105	12-21-2012 10:48 PM
knocking noise from the rear? please help!	black09Z	Engine & Drivetrain	22	11-24-2009 07:49 PM
High-Pitch noise in the car	wooya21	Nissan 370Z General Discussions	16	10-27-2009 04:33 PM
Help...The car is making a wierd noise	armensti	Nissan 370Z General Discussions	13	07-13-2009 08:15 PM
Tire Noise	dwhitley0381	Nissan 370Z General Discussions	0	06-11-2009 09:34 AM

11-12-2009, 06:54 PM	#16 (permalink)
bradz Enthusiast Member Join Date: Jul 2009 Location: Pinellas County Florida Posts: 348 Drives: 09' 370z MB 6spd Rep Power: 15	They just put grease on my rear axle assembly and whalllaaaaaaa clicking noise gone. This was since 3 months ago.

11-13-2009, 12:34 AM	#17 (permalink)
bilo Base Member Join Date: Sep 2009 Location: LA,CA Posts: 42 Drives: Black Nissan 370z Rep Power: 15	ok here it is off my invoice: tech notes-tech was adised from tech line to perform bulletin on noise from axels. "note" this is a temp fix, if noise comes back on need to conact nissan. Tech removed both rear axels, regreased them, and turned them 180 degrees from their original spot. DAT: 40073-0L700 Sympt code: ZL DIAG CODE: 46 ok so after this maintence was done I felt a WORLD! of difference. The car is way torqier. Also my VDC doesnt ingage so pointlessly. I used to give the car some gas and the VDC would just kick in at very little torque. Sooo....my guess was the "looseness" in the fangs inside the pumpkin where triping the VDC into thinking slip. bottom line....after having my car for 4 months, I finally took it for its first real drive today and felt what she should have been like the whole time. Dealer info: Nissan of Visalia (559) 734-3333 if this helps then please hit me up for cred points...lol thanks.

05-20-2011, 02:13 PM	#18 (permalink)
nynhex Base Member Join Date: Apr 2011 Location: Houston Posts: 247 Drives: 370z Rep Power: 370	Sorry to ressurect such an old thread, but this was my experience with the problem: This issue is covered in a TSB but Mossy Nissan here in Houston said that the procedure of rotating the axles and greasing the diff/etc is considered an "adjustment" and only covered in the first 12,000 miles of service. So I had to drop my car off with them for 3 hours and will probably end up having to pay 350+ for them to fix it. Totally sucks, but I guess in the end it's cheaper than an axle or cv going out. (Shrug)