Torque (the app)

shadow85 · 07-06-2017, 10:49 PM

Quote:

Originally Posted by Jayhovah

Not to my knowledge... unless it has some way to interface with external sensors.

Ok I think I may replace the factory gauges with Boost, Oil Pressure, and then trans oil temp.

Then use Torque app to display Engine oil Temp (VVT oil temp via nissan advance plug in) and A/F since I am pretty sure that it can atleast do them properly.

That way I won't have to add too many new gauges and keep the cost to a minimum for monitoring the vitals.

DeliriousClam · 06-28-2017, 07:25 PM

Torque Pro and the Nissan Add-on is awesome. I run it through a tablet mounted in my sunvisor.

(car is off which is why it says "no data")

shadow85 · 07-03-2017, 10:51 PM

How accurate is Torque pro or dash command?

Can I use them instead of a traditional boost gauge and wideband A/F gauge when I do my TT build?

Im thinking of going to torque app route to save on costs from new gauges/sensors, but not sure if it is critical to use standalone gauges instead.

Things I am looking at reading:
Boost
Oil Temp/pressure
Trans oil temp
Wideband

I would save alot of cash if I can safely rely on these apps instead.

shadow85 · 07-17-2017, 06:36 PM

So I noticed Torque app has a paramter called 'Turbo boost $ Vaccum gauge'

Does anyone know if this works properly like a boost gauge for boosted Zs?

radix023 · 07-18-2017, 07:53 AM

Quote:

Originally Posted by shadow85

So I noticed Torque app has a paramter called 'Turbo boost $ Vaccum gauge'

Does anyone know if this works properly like a boost gauge for boosted Zs?

If you go into Torque's configuration while your car is running and the OBD2 adapter connected, the signals available will be highlighted in the signal list.

shadow85 · 07-23-2017, 08:51 PM

Quote:

Originally Posted by radix023

If you go into Torque's configuration while your car is running and the OBD2 adapter connected, the signals available will be highlighted in the signal list.

Yes I know this. I just wanted to know if anyone has compared the Torque App (Turbo) vaccum/boost gauge to a proper external boost gauge?

radix023 · 07-24-2017, 07:46 AM

Quote:

Originally Posted by shadow85

Yes I know this. I just wanted to know if anyone has compared the Torque App (Turbo) vaccum/boost gauge to a proper external boost gauge?

I have not. You're right to be suspicious. Torque massively underestimates my MPG.

06-28-2017, 07:25 PM	#2 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54273	Torque Pro and the Nissan Add-on is awesome. I run it through a tablet mounted in my sunvisor. (car is off which is why it says "no data") __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HP Torque	RiCharlie	Nissan 370Z General Discussions	15	07-24-2011 10:35 PM
More Air=Less Torque.?	Chan Chee Hoe	Intake/Exhaust	12	02-18-2011 06:58 AM
Low end torque on 350 vs the 370?	cossie1600	Track / Autocross / Drifting / Dragstrip	20	05-06-2010 08:18 AM
Where's the torque??	sbkim	Nissan 370Z General Discussions	14	02-02-2009 07:14 PM

07-03-2017, 10:51 PM	#3 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 921 Drives: 15' 370Z A/T AMM TT Rep Power: 26	How accurate is Torque pro or dash command? Can I use them instead of a traditional boost gauge and wideband A/F gauge when I do my TT build? Im thinking of going to torque app route to save on costs from new gauges/sensors, but not sure if it is critical to use standalone gauges instead. Things I am looking at reading: Boost Oil Temp/pressure Trans oil temp Wideband I would save alot of cash if I can safely rely on these apps instead.

07-17-2017, 06:36 PM	#4 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 921 Drives: 15' 370Z A/T AMM TT Rep Power: 26	So I noticed Torque app has a paramter called 'Turbo boost $ Vaccum gauge' Does anyone know if this works properly like a boost gauge for boosted Zs?