Painting Akebono brakes

Originally Posted by Guard Dad

Painted mine in hi-temp red with silver Akebono lettering then applied a hi-temp clear gloss top coat. They look perfect! Smooth as glass.

Prep gently with very fine steel wool. Wash and dry throughly. Apply a very light coat of hi-temp gray primer. No need to remove the calipers. Little known fact: The factory only paints the outer half of the caliper, no real need to paint the back side of the caliper. Mask with care, don't forget to mask the bleed screws, and the spray away!

Total cost about $35.00. Many positive comments.

Originally Posted by CorbinDallas

Any pictures of your setup?