What did you do with your Z today II

happytheman · 02-07-2012, 10:03 PM

Oh yah, forgot in the ensuing pandemonium that this thread creates I forgot to mention that I picked up a set of the RainX Latitude wipers for the Z and replaced the tail light bulbs in the Xterra.

Srenity · 02-07-2012, 10:22 PM

I re-installed my Mikey Mouse trim piece (now Black) and in the process installed a new spacer device between my TWM short shifter and PWDJDM shift knob to keep the boot from sagging. I will get pics up later. I like the look a lot better personally.

Srenity · 02-07-2012, 10:36 PM

And I just became a premium member....decals here I come!

onzedge · 02-07-2012, 10:48 PM

Quote:

Originally Posted by Srenity

And I just became a premium member....decals here I come!

TheGreatOne · 02-07-2012, 11:06 PM

Well in my "stored Z" withdrawl phase I followed Bumblez DIY on painting your key FOB, but I took it a step further and wrapped it in real 2x2 twill Carbon Fiber...wasn't easy but I think its coming out good...not quite finished.

Oh and I got to visit my car today (stored at friends house) so I got some good sitting in the drivers seat time

So this is just the test fit...might need another wet sanding then polishing, then done

Srenity · 02-07-2012, 11:12 PM

Quote:

Originally Posted by TheGreatOne

Well in my "stored Z" withdrawl phase I followed Bumblez DIY on painting your key FOB, but I took it a step further and wrapped it in real 2x2 twill Carbon Fiber...wasn't easy but I think its coming out good...not quite finished.

Oh and I got to visit my car today (stored at friends house) so I got some good sitting in the drivers seat time

So this is just the test fit...might need another wet sanding then polishing, then done

Looking really good. Not sure if you have any CF interior trim or not but this would be a nice touch for those that do.

Srenity · 02-07-2012, 11:13 PM

Pics of the interior trim piece as promised above.

alcheng · 02-08-2012, 02:54 AM

Quote:

Originally Posted by TheGreatOne

Well in my "stored Z" withdrawl phase I followed Bumblez DIY on painting your key FOB, but I took it a step further and wrapped it in real 2x2 twill Carbon Fiber...wasn't easy but I think its coming out good...not quite finished.

That is awesome!!! Does it take long time to finish???

TheGreatOne · 02-08-2012, 07:31 AM

Quote:

Originally Posted by alcheng

That is awesome!!! Does it take long time to finish???

Thanks guys, I'd say a large part is waiting for the resin to dry, which is overnight, so 2 days right there (did 2 coats before sanding)...small piece so the wet sanding isn't that bad, its what makes the difference though...so patience is key...

I haven't done a perfect piece yet but getting close, I give props to companies churning out CF daily...not easy.

happytheman · 02-08-2012, 08:31 AM

Quote:

Originally Posted by TheGreatOne

Thanks guys, I'd say a large part is waiting for the resin to dry, which is overnight, so 2 days right there (did 2 coats before sanding)...small piece so the wet sanding isn't that bad, its what makes the difference though...so patience is key...

I haven't done a perfect piece yet but getting close, I give props to companies churning out CF daily...not easy.

That just looks like a cool side project! You'll be pleased to say you did it when it's all said and done!

Mt Tam I am · 02-08-2012, 09:06 AM

I was a good boy and did not pass a BMW, who earlier was drifting through turns. Turns out a hidden cop was waiting for my maneuver.

kenchan · 02-08-2012, 09:23 AM

Quote:

Originally Posted by happytheman

Oh yah, forgot in the ensuing pandemonium that this thread creates I forgot to mention that I picked up a set of the RainX Latitude wipers for the Z and replaced the tail light bulbs in the Xterra.

huh cool, keep us posted if those wipe the entire width of the blade on our glass.

i bought some piaa or bosch or something on my G as winter blades and it doesnt quite wipe the very bottom edge on the passenger side. not a huge deal, but a little bummed (but was expected of aftermarket blades).

Quote:

Originally Posted by Srenity

Looking really good. Not sure if you have any CF interior trim or not but this would be a nice touch for those that do.

thegreatone- that looks great.

Quote:

Originally Posted by TheGreatOne

Thanks guys, I'd say a large part is waiting for the resin to dry, which is overnight, so 2 days right there (did 2 coats before sanding)...small piece so the wet sanding isn't that bad, its what makes the difference though...so patience is key...

I haven't done a perfect piece yet but getting close, I give props to companies churning out CF daily...not easy.

yah, reminds of my Ings+ CF splitter. it came in with ragged edges and basically raw resin over CF. i had to wetsand quite a bit before clearcoating.

yah, so last night i had to PDR my digital piano. lol

i found a small dent (not sure from where) but took the thing apart completely and used my knockdown tool from the back to push out. looks perfect.

i was almost thinking about taking off the side pieces to be CF wrapped. lol

370ZilverZ · 02-07-2012, 11:11 PM

Quote:

Well in my "stored Z" withdrawl phase I followed Bumblez DIY on painting your key FOB, but I took it a step further and wrapped it in real 2x2 twill Carbon Fiber...wasn't easy but I think its coming out good...not quite finished.

Nice work

happytheman · 02-07-2012, 11:30 PM

Srenity, that trim piece does look really good!

congrats on becoming a Premium Member!

ThegreatOne, that CF wrap is sick! In for results!

gurneyeagle · 02-08-2012, 05:13 PM

Quote:

Originally Posted by happytheman

Srenity, that trim piece does look really good!

congrats on becoming a Premium Member!

ThegreatOne, that CF wrap is sick! In for results!

02-07-2012, 10:03 PM	#1 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1823	Oh yah, forgot in the ensuing pandemonium that this thread creates I forgot to mention that I picked up a set of the RainX Latitude wipers for the Z and replaced the tail light bulbs in the Xterra. __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

02-07-2012, 11:06 PM	#5 (permalink)
TheGreatOne A True Z Fanatic Join Date: Jan 2011 Location: Montreal, Canada Age: 47 Posts: 1,980 Drives: E60 BMW M5 Rep Power: 22	Well in my "stored Z" withdrawl phase I followed Bumblez DIY on painting your key FOB, but I took it a step further and wrapped it in real 2x2 twill Carbon Fiber...wasn't easy but I think its coming out good...not quite finished. Oh and I got to visit my car today (stored at friends house) so I got some good sitting in the drivers seat time So this is just the test fit...might need another wet sanding then polishing, then done __________________ 2017 SUBARU STI 2008 E60 M5 - SOLD 2010 40th Anniversary 370Z - SOLD (and missing her)

02-08-2012, 09:06 AM	#11 (permalink)
Mt Tam I am A True Z Fanatic Join Date: Jun 2010 Location: California Posts: 10,709 Drives: 370Z T/S/N 6MT & XKE Rep Power: 3844	I was a good boy and did not pass a BMW, who earlier was drifting through turns. Turns out a hidden cop was waiting for my maneuver. __________________ "Does the carpet match the drapes? NO!!! I don't date bald women." Nissan Motorsports 34R Oil Cooler. Stillen CBE. Hotchkis Sport Sway Bars. KW Variant 3 Coilover System. Stillen Gen3 CAI. Michelin Pilot Super Sport. Stillen Brake Ducts. Carbotech™ XP10/XP8 Pads. Z1 Front Rotors. Z1 Stainless Brake Lines. Two degrees of camber

02-07-2012, 11:30 PM	#14 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1823	Srenity, that trim piece does look really good! congrats on becoming a Premium Member! ThegreatOne, that CF wrap is sick! In for results! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
PSA for today	USMCASA	Nissan 370Z General Discussions	6	08-29-2011 07:08 PM
New Z today!	dbvato	Introduction	16	10-06-2010 05:13 PM
look what I got today!!! :)	irishboy	Australia/New Zealand	16	07-31-2009 12:54 AM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM

02-07-2012, 10:22 PM	#2 (permalink)
Srenity Track Member Join Date: Mar 2009 Location: San Luis Obispo, CA Posts: 537 Drives: 40th Rep Power: 19	I re-installed my Mikey Mouse trim piece (now Black) and in the process installed a new spacer device between my TWM short shifter and PWDJDM shift knob to keep the boot from sagging. I will get pics up later. I like the look a lot better personally.

02-07-2012, 10:36 PM	#3 (permalink)
Srenity Track Member Join Date: Mar 2009 Location: San Luis Obispo, CA Posts: 537 Drives: 40th Rep Power: 19	And I just became a premium member....decals here I come!

02-07-2012, 11:13 PM	#7 (permalink)
Srenity Track Member Join Date: Mar 2009 Location: San Luis Obispo, CA Posts: 537 Drives: 40th Rep Power: 19	Pics of the interior trim piece as promised above.