What did you do with your Z today II

DufDaddy · 03-23-2012, 11:05 AM

Quote:

Originally Posted by Fire

Morning guys

Well the doc said I'm still alive.

I think I knew that before paying a $30 co-pay

Congrats on still being alive

......according to the local paper I died yesterday, but unless this is heaven I'm pretty sure I'm alive.

onzedge · 03-23-2012, 11:13 AM

Quote:

Originally Posted by DufDaddy

Congrats on still being alive

......according to the local paper I died yesterday, but unless this is heaven I'm pretty sure I'm alive.

alcheng · 03-23-2012, 11:17 AM

Quote:

Originally Posted by kenchan

Mr.alcheng- good morning!

id definitely stick with 10mm max if not lowered. Is DRS the stud replacement type? If so no issue with stock studs protruding.

Morning all! Tgif!

Mr.kenchan, 10mm or 15mm is what I am thinking, are you thinking the chances of the tires hitting the wheel-well over big bump if I go for 15-20mm with stock-spring(too soft)???

Quote:

Originally Posted by onzedge

Happy Friday, everyone.

In my experience, Fridays are either very good or very bad. I am hoping for the former today.

Quote:

Originally Posted by onzedge

Nothing is happening with the Z's today. My wife let me drive the Juke to work, though.

Mr.onzedge, you drive the Juke today and have fun, so it sounds like you are having a very good Friday.

Quote:

Originally Posted by Fire

Morning guys

Well the doc said I'm still alive.

I think I knew that before paying a $30 co-pay

Hey, Fire, you better keep yourself alive cos the ZL1 is not here yet.

Quote:

Originally Posted by LMBmikeZ

Alchemy alcheng I also went h&r as many others have. You definitely get great quality they are the best ones one the market. I did another common sizing I have seen a bunch of guys go with, 20mm drs spacer in the front 25mm drm spacer on rears. I think what size you go with should be based on how flush you want to be. Personally I'm more into the hella flush wheel scene over the stretch and poke look jut preferences. You can check the pics of mine in my thread I linked below.......GL and happy modding

LMBmikeZ - 40th anniversary

Thanks for your advice LMBmikeZ, I am going with H&R for sure.

I fixed the spelling too. LOL

Quote:

Originally Posted by ZMan8

Good morning all, happy Friday!

Rainy in Chicago this morning

Morning ZMan8.

Good Afternoon Everyone!!!!

Work Your A$$ Off Friday!!!!!

ZMan8 · 03-23-2012, 11:25 AM

Quote:

Originally Posted by alcheng

Morning ZMan8.

Morning Mr. Alcheng!

I tried measuring the gap last night but couldn't get accurate measurements (1 am = ....

) I'll try your method today. Based on what others have done here I think front is 15 mm max on stock rays. I don't like poke and I don't want rock chips everywhere either from too much tire coming out.

For the rear I'm leaning at 15mm, but want to get a more accurate measurement before I pull the trigger. if feel like the perfect spacer for the rear would actually be about 17.5 mm haha

Fire · 03-23-2012, 11:41 AM

Ya alcheng those dam Canadians are taking their time. Maybe I can get them to work harder for some poutine, eh?

Fire · 03-23-2012, 11:42 AM

Sorry to hear of your passing Duf.

alcheng · 03-23-2012, 12:11 PM

Quote:

Originally Posted by ZMan8

Morning Mr. Alcheng!

I tried measuring the gap last night but couldn't get accurate measurements (1 am = ....

) I'll try your method today. Based on what others have done here I think front is 15 mm max on stock rays. I don't like poke and I don't want rock chips everywhere either from too much tire coming out.

For the rear I'm leaning at 15mm, but want to get a more accurate measurement before I pull the trigger. if feel like the perfect spacer for the rear would actually be about 17.5 mm haha

hey ZMan8, have you lowered your Z??

I am a bit bias to 15mm with my rims, I don't have the stock RAYS you know, but wanna see if kenchan's comments on the consideration I have on the 15mm.

Quote:

Originally Posted by Fire

Ya alcheng those dam Canadians are taking their time. Maybe I can get them to work harder for some poutine, eh?

Maybe they should do that in Mexico, LOL, nachos anyone?? eh?

ZMan8 · 03-23-2012, 12:15 PM

Quote:

Originally Posted by alcheng

hey ZMan8, have you lowered your Z??

I am a bit bias to 15mm with my rims, I don't have the stock RAYS you know, but wanna see if kenchan's comments on the consideration I have on the 15mm.

Not yet, I plan to get Swifts + Koni yellows but figured its better to get spacers first than lower first (If i plan to do one a time)

In a year or two, I may just buy nice wheels with the correct offsets (it's just hard right now to justify spending $800-$1000 per wheel)

TheGreatOne · 03-23-2012, 12:16 PM

Quote:

Originally Posted by alcheng

hey ZMan8, have you lowered your Z??

I am a bit bias to 15mm with my rims, I don't have the stock RAYS you know, but wanna see if kenchan's comments on the consideration I have on the 15mm.
eh?

Oh ya, thats right alcheng, you have Vossen's right?

I was going to say for sure if its stock, I would do what I and LMBmikeZ suggested, 20/25 but with aftermarket, its trickier.

I see that z1 has like 3mm spacers you can add to a 10 or 15

kenchan · 03-23-2012, 12:41 PM

Quote:

Originally Posted by alcheng

Mr.kenchan, 10mm or 15mm is what I am thinking, are you thinking the chances of the tires hitting the wheel-well over big bump if I go for 15-20mm with stock-spring(too soft)???

no, it wont hit anything with 15mm (may be 20mm), just the matter of balance in appearance.

hi fire!

kenchan · 03-23-2012, 12:46 PM

Quote:

Originally Posted by ZMan8

Morning Mr. Alcheng!

I tried measuring the gap last night but couldn't get accurate measurements (1 am = ....

) I'll try your method today. Based on what others have done here I think front is 15 mm max on stock rays. I don't like poke and I don't want rock chips everywhere either from too much tire coming out.

For the rear I'm leaning at 15mm, but want to get a more accurate measurement before I pull the trigger. if feel like the perfect spacer for the rear would actually be about 17.5 mm haha

if you're not going to lower your car 20mm spacers will give it a nice poke in the front. rear 20mm spacers will have poke. but again, the stock RE050A's are narrow tires (same size) compared to say the ContiDW's so it will look too narrow with poke on the rear especially if not lowered.

i recommend 15/10 (front/rear) or 15/15 (front/rear) spacers max on stock ride, sport 19's.

ZMan8 · 03-23-2012, 12:56 PM

Quote:

Originally Posted by kenchan

if you're not going to lower your car 20mm spacers will give it a nice poke in the front. rear 20mm spacers will have poke. but again, the stock RE050A's are narrow tires (same size) compared to say the ContiDW's so it will look too narrow with poke on the rear especially if not lowered.

i recommend 15/10 (front/rear) or 15/15 (front/rear) spacers max on stock ride, sport 19's.

Kenchan is the spacer guru

No 20's for the front i for sure. And I'm think 15mm for rear should be good.

It's interesting you recommend even 10 mm for rear. Seems like 98% go 20mm or 25mm in the rear. But I dont want poke especially on narrow tires.

EDIT: I will evaluate if I want to lower/how much once I see how the car sits with spacers

onzedge · 03-23-2012, 12:58 PM

Quote:

Originally Posted by ZMan8

Kenchan is the spacer guru

No 20's for the front i for sure. And I'm think 15mm for rear should be good.

It's interesting you recommend even 10 mm for rear. Seems like 98% go 20mm or 25mm in the rear. But I dont want poke especially on narrow tires.

EDIT: I will evaluate if I want to lower/how much once I see how the car sits with spacers

..cuisine and detailing also.

kenchan · 03-23-2012, 01:01 PM

Quote:

Originally Posted by ZMan8

Kenchan is the spacer guru

No 20's for the front i for sure. And I'm think 15mm for rear should be good.

It's interesting you recommend even 10 mm for rear. Seems like 98% go 20mm or 25mm in the rear. But I dont want poke especially on narrow tires.

EDIT: I will evaluate if I want to lower/how much once I see how the car sits with spacers

hi zman-

yah, the car just looks werd with narrow tires with wide stance unless it's lowered. then the added camber kinda blends the lines better tucking the tires inwards.. but to me, still looks kinda werd.

kenchan · 03-23-2012, 01:02 PM

Quote:

Originally Posted by onzedge

..cuisine and detailing also.

we all loves charburgers and cheeze fries.

hello, mr.onzedge!

03-23-2012, 11:41 AM	#5255 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 45	Ya alcheng those dam Canadians are taking their time. Maybe I can get them to work harder for some poutine, eh? __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

03-23-2012, 11:42 AM	#5256 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 45	Sorry to hear of your passing Duf. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
PSA for today	USMCASA	Nissan 370Z General Discussions	6	08-29-2011 07:08 PM
New Z today!	dbvato	Introduction	16	10-06-2010 05:13 PM
look what I got today!!! :)	irishboy	Australia/New Zealand	16	07-31-2009 12:54 AM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM