What did you do with your Z today II

ZMan8 · 02-29-2012, 12:38 PM

Quote:

Originally Posted by Huck

I installed my Stillen G3's last night. Turned out that whoever had the car before me had them as well, because the holes were already cut and ready to go, made my job easier.

Looks good. And

for precut holes

Gauge · 02-29-2012, 12:51 PM

Quote:

Originally Posted by Huck

I installed my Stillen G3's last night. Turned out that whoever had the car before me had them as well, because the holes were already cut and ready to go, made my job easier.

( Click to show/hide )

---
I am here: Google Maps

Hah, did he do a decent job cutting the holes?

Dallaz · 02-29-2012, 01:02 PM

Quote:

Originally Posted by TheGreatOne

Same knob I have, love it!

Question: for your CF Rear Spats did you make/receive a brace or just have it attached via screws/3M tape?

Apparently Sunline sends with brackets and screws (Shine Auto which I got) you get zip lol.

I bought the kit used so I didn't get anything, however the holes were pre drilled from the last guy and I don't think you have holes in yours if it's brand new? Anyways all I used were 3 screws and 2 were the ones that were holding my splash gaurds in place. So I only had to find a small dark colored screw to blend in and used a drill bit to get the hole needed in the rear bumper.

I was fortunate to get a piece with good fitment though, because if not, some sort of adhesive would definitely have been needed. The guy I bought them from said the shop that installed his used silicon but that when they uninstalled it it took off some paint. But if silicon were used I don't think there is a need for drilling a hole in your rear bumper, so it's up to you.

Basically whether you will be happy with it stuck on there and realize its just gonna need a little touch up from a paint shop if you ever remove it. In my case, I could just have the small hole filled and paint matched. No biggie either way I suppose.

Hope this helps

Nick911sc · 02-29-2012, 01:37 PM

Hey everyone,

To the guys who have the PWJDM V.2 knob. I'm probably going to pull the trigger on one soon, but I'm a little confused. Everyone who has posted pictures, their knob has both the 6spd pattern and pwjdm logo. But on the website to order, you have to choose 6spd pattern or logo. Is there something I'm missing?

pedZ · 02-29-2012, 01:50 PM

Quote:

Originally Posted by Nick911sc

Hey everyone,

To the guys who have the PWJDM V.2 knob. I'm probably going to pull the trigger on one soon, but I'm a little confused. Everyone who has posted pictures, their knob has both the 6spd pattern and pwjdm logo. But on the website to order, you have to choose 6spd pattern or logo. Is there something I'm missing?

Hey Nick,

Check out this post. It shows the differences between the two versions.

Password:JDM wants your feedback! What parts would you like to see us make?

kenchan · 02-29-2012, 01:51 PM

Quote:

Originally Posted by Nick911sc

Hey everyone,

To the guys who have the PWJDM V.2 knob. I'm probably going to pull the trigger on one soon, but I'm a little confused. Everyone who has posted pictures, their knob has both the 6spd pattern and pwjdm logo. But on the website to order, you have to choose 6spd pattern or logo. Is there something I'm missing?

werd.... mine has pwjdm and pattern... did you want just the pattern? i would check with them before i'd order in that case.

this is the one i have:

http://passwordjdm.com/images/products/8341_4.jpg

ZMan8 · 02-29-2012, 01:59 PM

Quote:

Originally Posted by Nick911sc

Hey everyone,

To the guys who have the PWJDM V.2 knob. I'm probably going to pull the trigger on one soon, but I'm a little confused. Everyone who has posted pictures, their knob has both the 6spd pattern and pwjdm logo. But on the website to order, you have to choose 6spd pattern or logo. Is there something I'm missing?

Just the logo is different than the logo on the 6spd pattern. The 6spd just has PWJDM or something similar written under the 6spd configuration. The logo knob hass a large P, japanese characters, along with their logo

Nick911sc · 02-29-2012, 02:10 PM

Thanks guys!

Now it totally makes sense lol

Now I need to decide between black or titanium... lol

kenchan · 02-29-2012, 02:14 PM

Quote:

Originally Posted by Nick911sc

Thanks guys!

Now it totally makes sense lol

Now I need to decide between black or titanium... lol

isn't black delrin? if so, not worth getting as it's too light imho...

if you want black, i'd get the stainless and have it powdercoated by Mike.

EndyKwon · 02-29-2012, 02:12 PM

The other day, I took out the silly dealership tag that was plaguing my front end. Turns out they overscrewed that license plate holder and now I have two tiny nicks on the front

Nick911sc · 02-29-2012, 02:13 PM

Quote:

Originally Posted by EndyKwon

The other day, I took out the silly dealership tag that was plaguing my front end. Turns out they overscrewed that license plate holder and now I have two tiny nicks on the front

This is the exact reason I have a front plate

Nick911sc · 02-29-2012, 02:15 PM

I should clarify, I mean black or titanium base ring!

ZMan8 · 02-29-2012, 02:19 PM

Quote:

Originally Posted by Nick911sc

I should clarify, I mean black or titanium base ring!

haha

I think for me I will go with red base to match my 40th red interior

I am open to suggestion though.

Nick911sc · 02-29-2012, 02:22 PM

Quote:

Originally Posted by ZMan8

haha

I think for me I will go with red base to match my 40th red interior

I am open to suggestion though.

I agree that would look awesome. I personally don't have any red in my car, so I'm pretty set on black or titanium... Anyone has pictures of the titanium or black installed in the car?

kenchan · 02-29-2012, 02:24 PM

mine has black ring under stainless, but no picture yet... lol i wish now i bought the titanium ring so that i can powder coat the knob black...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
PSA for today	USMCASA	Nissan 370Z General Discussions	6	08-29-2011 07:08 PM
New Z today!	dbvato	Introduction	16	10-06-2010 05:13 PM
look what I got today!!! :)	irishboy	Australia/New Zealand	16	07-31-2009 12:54 AM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM

02-29-2012, 01:37 PM	#4 (permalink)
Nick911sc A True Z Fanatic Join Date: Feb 2009 Location: Long Island, New York Posts: 1,698 Drives: 2010 Nissan GT-R Rep Power: 21	Hey everyone, To the guys who have the PWJDM V.2 knob. I'm probably going to pull the trigger on one soon, but I'm a little confused. Everyone who has posted pictures, their knob has both the 6spd pattern and pwjdm logo. But on the website to order, you have to choose 6spd pattern or logo. Is there something I'm missing?

02-29-2012, 02:10 PM	#8 (permalink)
Nick911sc A True Z Fanatic Join Date: Feb 2009 Location: Long Island, New York Posts: 1,698 Drives: 2010 Nissan GT-R Rep Power: 21	Thanks guys! Now it totally makes sense lol Now I need to decide between black or titanium... lol

02-29-2012, 02:12 PM	#10 (permalink)
EndyKwon Enthusiast Member Join Date: Jan 2012 Location: Los Angeles Posts: 431 Drives: '11 BSilver Base 7AT Rep Power: 14	The other day, I took out the silly dealership tag that was plaguing my front end. Turns out they overscrewed that license plate holder and now I have two tiny nicks on the front

02-29-2012, 02:15 PM	#12 (permalink)
Nick911sc A True Z Fanatic Join Date: Feb 2009 Location: Long Island, New York Posts: 1,698 Drives: 2010 Nissan GT-R Rep Power: 21	I should clarify, I mean black or titanium base ring!

02-29-2012, 02:24 PM	#15 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	mine has black ring under stainless, but no picture yet... lol i wish now i bought the titanium ring so that i can powder coat the knob black...