Hard wired V1 Radar detector power problem

tjlazer · 04-26-2010, 01:39 AM

I have my V1 hard wired on my home link. I noticed this annoying problem of the V1 intermittantly losing power and turning off then right back on, so it resets. Well it seems to only be happening at night! More investigating I have come to conclusion its when the lights are on and there are lots of things on. I also tested this while sitting in the car, engine running, I open the door and when the dome light comes on it will do it. Pressing the door button and releasing it will do this too. What could be causing this? I made sure the pins on the Invinsicord and in tight. I tried dozens of times making sure they are secure... Anyone else have any issues like this with their Invinsicord???

kenchan · 04-26-2010, 10:50 AM

why dont you just tap from the fuse box and place it near the dash? it's a lot easier to see the arrows on my V1 when it's close to the cluster than hanging on the rearview while blocking the view on the right side of the car.

tjlazer · 05-08-2010, 01:49 AM

Anyone have this issue?

tjlazer · 05-11-2010, 10:51 AM

I pin pointed the problem! The auto Dimming of the mirror would cause this when headlights would shine in the mirror. Everytime this happened, my Radar would reset. Turning off the AutoDim resolved the issue.

Could this be an electricial issue like not enough amperage where I tapped to get the power for the Homelink???

Cleto · 01-28-2011, 07:17 PM

you can not make up in that car without everybody looking at you!

steveg78 · 01-28-2011, 09:23 PM

Yeah sounds like you're drawing too much power than the circuit you tapped into can handle. What line did you tap?

kenchan · 01-29-2011, 07:25 AM

He detector uses next to nothing for current. I suggest going back to Mike's thread and check your wiring. I tapped the exact wires he used for the autodim. The detector should just be tapped to the fuse box if you're having issues. This should be a no brainer install.

danielcast · 01-29-2011, 10:04 AM

Dam valentine wont send me my clip to attach to mirror due to serial not matching from my v to there system.

04-26-2010, 01:39 AM	#1 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Hard wired V1 Radar detector power problem I have my V1 hard wired on my home link. I noticed this annoying problem of the V1 intermittantly losing power and turning off then right back on, so it resets. Well it seems to only be happening at night! More investigating I have come to conclusion its when the lights are on and there are lots of things on. I also tested this while sitting in the car, engine running, I open the door and when the dome light comes on it will do it. Pressing the door button and releasing it will do this too. What could be causing this? I made sure the pins on the Invinsicord and in tight. I tried dozens of times making sure they are secure... Anyone else have any issues like this with their Invinsicord??? __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

05-08-2010, 01:49 AM	#3 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Anyone have this issue? __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

05-11-2010, 10:51 AM	#4 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	I pin pointed the problem! The auto Dimming of the mirror would cause this when headlights would shine in the mirror. Everytime this happened, my Radar would reset. Turning off the AutoDim resolved the issue. Could this be an electricial issue like not enough amperage where I tapped to get the power for the Homelink??? __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

01-28-2011, 07:17 PM	#5 (permalink)
Cleto Base Member Join Date: Oct 2010 Location: riverside Posts: 16 Drives: 370z Rep Power: 14	you can not make up in that car without everybody looking at you! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where are you putting your radar detector?	LiquidZ	Nissan 370Z General Discussions	37	03-14-2012 07:12 PM
Radar Detector	Sunsational04	The Lounge (Off Topic)	60	11-19-2009 02:45 PM
Request: DIY Radar Detector Hardwire w/out Power Rear View Mirrors	Viera	DIY Section (Do-It-Yourself)	2	06-13-2009 09:53 PM
Hardwire Radar Detector	zero610	Audio & Video	7	03-04-2009 07:52 PM
Radar Detector	Jungle Prop	Nissan 370Z General Discussions	27	01-27-2009 11:53 PM

04-26-2010, 10:50 AM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	why dont you just tap from the fuse box and place it near the dash? it's a lot easier to see the arrows on my V1 when it's close to the cluster than hanging on the rearview while blocking the view on the right side of the car.

01-28-2011, 09:23 PM	#6 (permalink)
steveg78 Track Member Join Date: Apr 2009 Location: MD Posts: 569 Drives: 09 370Z PG M6 +Sport Rep Power: 17	Yeah sounds like you're drawing too much power than the circuit you tapped into can handle. What line did you tap?

01-29-2011, 07:25 AM	#7 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	He detector uses next to nothing for current. I suggest going back to Mike's thread and check your wiring. I tapped the exact wires he used for the autodim. The detector should just be tapped to the fuse box if you're having issues. This should be a no brainer install.

01-29-2011, 10:04 AM	#8 (permalink)
danielcast Base Member Join Date: Mar 2009 Location: McAllen TX Posts: 194 Drives: 40th Anniversary Rep Power: 16	Dam valentine wont send me my clip to attach to mirror due to serial not matching from my v to there system.