had oil cooler installed and.....

atx370z · 10-13-2010, 04:23 PM

They mounted it on the passenger side in front of the power steering cooler ( i think that's what it is. )

Is this going to affect the cooling effeciency of the power steering cooler seeing as the oil cooler is blocking it from getting good air flow? Also, one of the oil lines runs right in front of the oil cooler... im not sure what's up with that or why they did it. Might take bumper off to check it out.

Am i concerned for nothing, or should i take the bumper off and investigate.

Thanks!

atx370z · 10-13-2010, 05:11 PM

Anyone???...

Seb@SZ · 10-13-2010, 05:24 PM

I wouldn't worry about it too much. It would become an issue if you track the car hard in which some cases the fluid will expand and come spilling out the reservoir.

christian370z · 10-13-2010, 05:49 PM

Seb installed my Stillen cooler on the driver's side just to avoid impeding air flow to the OEM power steering fluid cooler which I prefer. However, it will not cause any negative effects on the P/S fluid under most conditions and it will still recieve airflow so you will be fine off the track.

10-13-2010, 04:23 PM	#1 (permalink)
atx370z Track Member Join Date: Aug 2010 Location: Austin, TX Posts: 637 Drives: 10 370Z T/S M6 Rep Power: 15	had oil cooler installed and..... They mounted it on the passenger side in front of the power steering cooler ( i think that's what it is. ) Is this going to affect the cooling effeciency of the power steering cooler seeing as the oil cooler is blocking it from getting good air flow? Also, one of the oil lines runs right in front of the oil cooler... im not sure what's up with that or why they did it. Might take bumper off to check it out. Am i concerned for nothing, or should i take the bumper off and investigate. Thanks!

10-13-2010, 05:24 PM	#3 (permalink)
Seb@SZ Enthusiast Member Join Date: Jan 2010 Location: Chatsworth Posts: 277 Drives: Zs Rep Power: 24	I wouldn't worry about it too much. It would become an issue if you track the car hard in which some cases the fluid will expand and come spilling out the reservoir. __________________ Z Car Specialists www.specialtyz.com Blog http://specialtyz.com/blog/

10-13-2010, 05:49 PM	#4 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 431	Seb installed my Stillen cooler on the driver's side just to avoid impeding air flow to the OEM power steering fluid cooler which I prefer. However, it will not cause any negative effects on the P/S fluid under most conditions and it will still recieve airflow so you will be fine off the track. __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
Would you be willing to pay for an oil cooler as a factory-installed option?	semtex	Nissan 370Z General Discussions	64	10-16-2010 03:33 PM
Oil cooler installed, result	cossie1600	Engine & Drivetrain	4	06-06-2010 03:32 PM
Oil Cooler.....Trans Cooler...	kannibul	Engine & Drivetrain	6	12-31-2009 06:32 PM

10-13-2010, 05:11 PM	#2 (permalink)
atx370z Track Member Join Date: Aug 2010 Location: Austin, TX Posts: 637 Drives: 10 370Z T/S M6 Rep Power: 15	Anyone???...