|
Does anyone have experience with Permatex High Temp Thread Sealant? I used some on a few fittings about 5 days ago and the stuff still hasn't really cured. I put
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
06-29-2010, 09:19 PM
|
#1 (permalink) |
|
A True Z Fanatic
Join Date: Mar 2009
Location: Naples, FL
Posts: 4,117
Drives: to work
Rep Power: 1856    |
Permatex High Temp Thread Sealant, Slow to Cure?
Does anyone have experience with Permatex High Temp Thread Sealant? I used some on a few fittings about 5 days ago and the stuff still hasn't really cured. I put the fittings back in their plastic bags/containers after sealing them, so the airflow has definitely been poor. I'm a little frazzled since the sealant hasn't set up yet though. My next step is to bake them at 170F in the oven to see if that helps the curing. I followed the instructions of kneading the tube before use. Also, the data sheet suggests that different metals will cause the material to cure differently...some needing a special primer. I'm using aluminum. WTF?
Any thoughts?
__________________
2013 Cadillac V-Wagon, RIP Z |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| High Oil Temp = power + throttle response loss? | TARDCORE | Engine & Drivetrain | 92 | 08-16-2011 03:10 PM |
| Yes, another oil temp thread... | Jordo! | Engine & Drivetrain | 33 | 08-30-2010 11:50 PM |
| do the 2010 models have high oil temp issues...? | TheSnakeJake | Nissan 370Z General Discussions | 23 | 03-01-2010 09:40 PM |
| Yet another oil temp thread (this one's good...) | kannibul | Engine & Drivetrain | 7 | 08-20-2009 10:24 AM |
| High oil temp fix for Nismo 370Z | FairmanZ | Nissan 370Z General Discussions | 6 | 07-16-2009 08:33 PM |
Linear Mode
