carbon fiber front liecense area cover

Originally Posted by OldGuy

That's a very nice cover. However, as a cheap alternative, I can tell you what I did. When I complained to the dealer about the 2 holes remaining when the front plate holder was removed, he provided a black plastic screw-like piece for each hole that he gently tapped into place. Each hole has a small bump (head of the "screw') which isn't really noticeable and is not at all unattractive. Took 30 seconds. No cost. Just an alternative.
Ya' know, that's a very nice cover...

Originally Posted by SoCal 370Z

You might be referring to these: Bumper Plugs

And someone here also found some inexpensive plastic plugs at a hardware store (I can't remember the thread).

Originally Posted by SoCal 370Z

You might be referring to these: Bumper Plugs

And someone here also found some inexpensive plastic plugs at a hardware store (I can't remember the thread).

Originally Posted by Modshack

Bumper plugs are $30. You can find the plain flat black plugs in the hardware drawers at Lowes or Home Depot.for 80 cents. like what Old Guy is referring to, they'll disappear in that black bumper area.. They come in a variety of sizes too, depending on the hole you need to cover. I just did these for my GTI with a little touch-up paint and a squirt of clear...It had some seriously nasty 5/8ths holes there..(Previous owner had front plate laws in his state)