It's all great.......but...

vtec to vvel

Sub-ed. Interested in this as well.

Side note question: I know the OEM CSC is prone to failure. Is the same for the OEM CMC?

filip00

Yes, I had both mine fail within ~200 miles, at around 11k miles, at 11 years old.

vtec to vvel

Which MC did you replace yours with?

filip00

Unfortunately had no choice at that time and was in a rush, so put a stock one :/ they assured me it's a new part according to the catalogue number so we'll see how long it lasts.

vtec to vvel

Looks like it's holding up well

ZoomZ

The C-MC can be rebuilt. From what I hear it's the plastic parts that fail. So for $35 on a low mileage unit, it might be worth saving.

https://zspeed.com/product/oem-clutc...r-rebuild-kit/

new unit:https://zspeed.com/product/nissan-oe...-g37-g35s-q60/

I've only seen the Tilton MC as an alternative. I think Willwood makes one for 350Z. Maybe someone can better answer for the latter option fir on 370.

vtec to vvel

After tons of research the past few months, I'm starting to wonder if the OEM CMC itself is fine and needs replacing only if the CSC is bad? ZSpeed only sells the OEM CMC with their aftermarket package.

I'm jealous of you that you got the CSC replaced out lol. I'm trying to find the find time and another able body to help me or the other option of looking for a reputable shop to do it in my area.

ZoomZ

Don't be jealous, just do it. Not hard. Hardest part is getting transmission out, only because it's labor intensive

The RJM pedal can be packaged with the Tilton MC. I think RJM will sell MC seperately or I'm sure you can do an internet search. I have the RJm Pedal kit as well.

Not sure if it works with OEM pedal, so something to ask Ryan (RJM)
https://rjmperformance.com/370z-g37/...ter-cylinders/

vtec to vvel

I have to take some vacay time. The nature of my job is basically where I'm on call constantly (there are even times when I'm on Zoom calls at 3.00 AM local time due to a client being in another state [Hawaii]).

When you did yours, did you do it solo or have help?

ZoomZ

95% I did myself. Called my brother to help pull transmission out and then back in. (only because my transmission jack was shady )

I have quickjack, and it's probably lower than what 9 ton jacks stands will get you for clearance. Then you need a flor jack that gets you that high.

Lift would make things easier.